Dymo M25, M10 User Manual

M10 | M25

Digital USB Postal Scale User Guide
Guide d'utilisation de la Balance postale USB numérique

M10 | M25

DYMO® Digital USB Postal Scale. . . . . . . . . . . . .1

Balance postale USB numérique DYMO . . . . .7

DYMO® Digital USB Postal Scale

Power

LCD
display

Kg/Lb

Hold

Zero/
Tar e

USB port

LED

!

AAA

AAA

AAA

AAA

AAA

AAA

!

!

This User Guide provides instructions for

®

using your DYMO
Visit

www.dymo.com/register

your scale.

Setting Up the Scale

The scale is powered through a USB port on
your computer. When not connected to your
computer, the scale can be powered by three
AAA batteries.

To set up the scale

1. Unpack the scale.

2. Set the scale on a firm, flat surface.

3. Plug the USB cable into the USB port on
the back of the scale.

4. Plug the USB cable into an available USB
port on your computer.

The scale is automatically recognized by
your computer when the power is turned on.

When connecting the scale through a

USB hub, always use a powered hub.

Inserting the Batteries

When not connected to your computer, the scale can be powered by
three AAA alkaline batteries. The scale automatically turns off after
three minutes of inactivity.

To insert the battery

1. Disconnect the USB cable from the computer or USB hub.

2. Turn the scale over.

3. Remove the battery compartment cover.

4. Insert three AAA batteries as shown.

Make sure to insert the batteries correctly. Inserting the

batteries backwards can damage the scale.

5. Replace battery compartment cover.

Remove the batteries if the scale will not be used for a long period of time.

Digital USB Postal Scale.

to register

1

Turning On the Power

0.0

TARE

The scale has an Auto Shut Off feature which automatically turns off the scale after three
minutes of inactivity.

To turn the scale on

♦

Press on the front of the scale.

When the scale is first turned on, wait a few seconds for the scale to stabilize before weighing
items. The display shows

0.0

when ready.

To turn the scale off

♦

Press on the front of the scale to turn the scale off.
The scale turns off automatically after three minutes of inactivity.

Using the Scale

Always wait for
scale platform.

After placing an item on the scale, wait for several seconds for
the weight to appear. When the scale is ready, a
left of the weight.

To weigh an item

♦

Place an item on the scale platform.

Using the Tare Feature

You can weigh small items or items that cannot be easily placed on the scale platform by
placing the items in a container and using the Tare/Zero button to eliminate the weight of
the container.

To use the tare feature

1. Place an empty container on the platform.

2. When the scale is ready, press .
The display is set to zero.

3. Place the items to be weighed in the container.
The display shows the weight of the items, without the weight of the container.

4. After removing the container, press to reset the scale to zero.

0.0

to display before placing an item on the

o

appears to the

0.0

TARE

2