DYMO Caption Maker Instruction Manual

Load your 3/8” 3D Label Refi ll

Great for captions,

titles and borders!

Caption Maker

Instructions

c reate

customize

caption

www.dymo.com

1.2”

Extend Label 1.2”

1.21.1 1.3 1.4 1.5 1.6

Open label cassette
compartment

Feed label into guide Place cassette into

position

Close back coverSqueeze the trigger 6 to

8 times to advance tape

Check out the

DYMO website for ideas

and inspiration at

www.dymo.com

Produced by:

DYMO, Stamford, CT 06902

©Sanford, L.P.

www.sanfordbrands.com

Remove wheel by
pushing the wheel out
from the right side

Insert wheel by pushing
wheel in from the left
side

3.1 3.2 3.3 3.42.1 2.2

Choose your letter or
symbol and place the
pointer in the center of
that character

Using your Caption MakerInsert your wheel

Squeeze trigger until the
dark pink dot appears in
the lens window

Select scissor and
squeeze trigger to cut

Use cut tab to remove
backing

DO NOT turn

character wheel

and squeeze at the

same time!

This will cause

damage to

the machine

Register your product

online at
www.dymo.com/register
to learn more about your

product and receive
information on new

products and limited

label edition!