Duali ITOUCHPOPV2 Users Manual
y
ITOUCH_POP2
Specification
DUALi Inc.
Document Number: EP01-14-004
Document Version: 1.0
Last Revised Date: 11
Copyright ⓒ 2014 DUALi Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this
document in part or as a whole for any purposes other than those for which this document is disclosed. This document
is copyrighted and contains confidential information and other intellectual property rights of DUALi Inc. An
unauthorized use, copy, disclosure or distribution constitutes infringement of DUALi’s intellectual property rights.
th
Dec. 2014
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
FCC ID: SWUITOUCHPOPV2
WARNING! Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
RF EXPOSURE WARNING! This equipment must be installed and operated in
accordance with provided instructions and the antenna(s) used for this transmitter must
be installed to provide a separation distance of at least 20 cm from all persons and must
not be co-located or operating in conjunction with any other antenna or transmitter.
End-users and installers must be provided with antenna installation instructions and
transmitter operating conditions for satisfying RF exposure compliance.
DUALi Inc. reserves the right to make changes to its applications or services or to discontinue any
application or service at any time without notice. DUALi provides customer assistance in various
technical areas, but does not have full access to data concerning the use and applications of
customer's products.
Therefore, DUALi assumes no liability and is not responsible for customer applications or software
design or performance relating to systems or applications incorporating DUALi products. In addition,
DUALi assumes no liability and is not responsible for infringement of patents and/or any other
intellectual or industrial property rights of third parties, which may result from assistance provided by
DUALi.
Composition of the information in this manual has been done to the best of our knowledge. DUALi
does not guarantee the correctness and completeness of the details given in this manual and may not
be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our
efforts, errors may not be completely avoided, we are always grateful for your useful tips.
We have our development center in South Korea to provide technical support. For any technical
assistance can contact our technical support team as below;
Tel: +82 31 213 0074
e-mail : lab@duali.com
iTOUCH_POP2 Product Specification
`
Revision History
2014.12.11 (Ver. 1.0) : Release
Version. 1.0 DUALi Inc.
3
(http://www.duali.com)
iTOUCH_POP2 Product Specification
`
Contents
1 Introduction ............................................................................................................................... 5
2 Components Confirmation ......................................................................................................... 6
2.1 Product Components ....................................................................................................... 6
2.2 Block Diagram ................................................................................................................ 7
2.3 Block Diagram specification ............................................................................................. 8
2.4 Exterior ........................................................................................................................... 9
2.5 PCB .............................................................................................................................. 1 0
2.6 Product Size ................................................................................................................. 11
3 Power & Interface Specification ............................................................................................... 12
3.1 Power Specification ....................................................................................................... 12
3.2 Electric Current Specification ......................................................................................... 12
3.3 RS-232 Interface Specification ....................................................................................... 12
3.4 USB Interface Specification ........................................................................................... 12
3.5 TCP/IP Interface Specification ....................................................................................... 12
3.6 WI-FI Interface Specification .......................................................................................... 12
4 Configuration for Door Lock Control
4.1 POP + LOCK ................................................................................................................ 13
4.2 POP + PDU + Deadbolt Lock ......................................................................................... 14
4.3 POP(RS-485) + PDU + Deadbolt Lock ........................................................................... 14
5 Connector Specification .......................................................................................................... 15
5.1 J6 (MINI USB) – USB_OTG (Outside) ............................................................................ 15
5.2 J17 (USB A TYPE) – USB_HOST (Outside) ................................................................... 15
5.3 J8 (2mm ,3-PIN DIP TYPE, RIGHT Angle) – UART ........................................................ 15
5.4 J7 (1.25mm, 4-PIN SMD TYPE, RIGHT Angle) - DEBUG UART ..................................... 15
5.5 J9 (2mm ,4-PIN DIP TYPE, RIGHT Angle) - RS-485 (Outside) ........................................ 16
5.6 J11 (2mm, 7-PIN DIP TYPE, RIGHT Angle) - DOOR (Outside) ....................................... 16
5.7 J12 (2mm, 7-PIN DIP TYPE, RIGHT Angle) - WD_DATA (Outside) ................................. 16
5.8 J4 (2.5mm 2PIN DIP, RIGHT Angle) - POWER (Outside) ............................................... 16
.........................................................................................
13
6 Usage Environment ................................................................................................................ 17
6.1 Recommendable Operating Environment ....................................................................... 17
6.2 Recommendable Storage Environment .......................................................................... 17
7 Warning and Notice ................................................................................................................
8 Certification
Version. 1.0 DUALi Inc.
............................................................................................................................ 17
4
(http://www.duali.com)
17
iTOUCH_POP2 Product Specification
`
1 Introduction
iTOUCH pop2 is designed as a wall-mounted smartcard reader suitable for time-attendance, access
control, ID check, self-check-in, self-payment system based on Android O/S.
iTOUCH pop2 communicates with PC or controller via USB ,TCP/IP, WiFi(wireless LAN) or
Bluetooth(option). User can develop their own program by using Android Jellybean
CPU 32bit ARM-CORTEX A5 RISC processor
Operating frequency Normal. 625MHz Up to 833MHz
Working Memory DDR3 (4Gbit x 2)
Program Memory Nand flash (4Gbyte)
OS Linux3.0.31 or better, Android 4.2.2 Jellybean
Network 10/100M Ethernet POE Option
Display
Camera I/F
SAM I/F 1 SAMs supported ISO-7816
Sound Stereo Audio Codec
Speaker Stereo Output with 1Watts 1ea
Serial Comm.
Wiegand D0, D1, LED(in) OUTPUT
SD/MMC Card Slot Micro SD memory card 1Slot
USB OTG USB 2.0 OTG 1ch.
USB Host USB 2.0 Host 1ch.
480*272 RGB (16.7M colors)
with 4.3inch touch panel
1/4-inch 5Mp SOC Digital image sensor
5M Pixels,Auto Focus
RS232 1ch with 5V power (Control outdoor
sound)
RS232 1ch, RS485 1ch
480*3(RGB)*272
Option
3ch.
RF PN512 with AMP
Button 4 Keys
Door status check sensor, Open Switch
Door control I/F
Version. 1.0 DUALi Inc.
Relay(NO, NC, COM), Secure Lock(RS485),
Output(PDU)
5
(http://www.duali.com)
Loading...