Duali DE 632 User Manual

NFC PAD (DE-632)

Product specification

DUALi Inc.

Document Version: 1.00

Last Revised Date: 14th JAN. 2014

Copyright ⓒ 2014 DUALi Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use
this document in part or as a whole for any purposes other than those for which this document is disclosed. This
document is copyrighted and contains confidential information and other intellectual property rights of DUALi Inc.
Any unauthorized use, copy, disclosure or distribution constitutes infringement of DUALi’s intellectual property

NFC PAD Specification

DUALi Inc. reserves the right to make changes to its applications or services or to discontinue

any application or service at any time without notice. DUALi provides customer assistance in

various technical areas, but does not have full access to data concerning the use and

applications of customer's products.

Therefore, DUALi assumes no liability and is not responsible for customer applications or

software design or performance relating to systems or applications incorporating DUALi

products. In addition, DUALi assumes no liability and is not responsible for infringement of

patents and/or any other intellectual or industrial property rights of third parties, which may

result from assistance provided by DUALi.

Composition of the information in this manual has been done to the best of our knowledge.

DUALi does not guarantee the correctness and completeness of the details given in this manual

and may not be held liable for damages ensuing from incorrect or incomplete information. Since,

despite all our efforts, errors may not be completely avoided, we are always grateful for your

useful tips.

We have our development center in South Korea to provide technical support. For any

technical assistance can contact our technical support team as below;

Tel: [phone]

e-mail : [email protected]

FeliCa

™ is registered trademark of SONY Corporation.

®

Mifare

is registered trademarks of NXP Semiconductors

㈜듀얼아이 2/12

NFC PAD Specification

Revision History

 2014.01.14 (Ver. 1.0) : First release

㈜듀얼아이 3/12

NFC PAD Specification

CONTENTS

1 INTRODUCTION..............................................................................................................................5

1.1 P

1.2 RF

1.3 SAM

RODUCT SPECIFICATION ..............................................................................................................5

PART SPECIFICATION .............................................................................................................6

PART SPECIFICATION..........................................................................................................6

2 STRUCTURE.....................................................................................................................................7

2.1 C

2.2 T

2.3 D

OMPONENTS CONFIRMATION ......................................................................................................7

HE BLOCK DIAGRAM OF NFC PAD........................오류! 책갈피가 정의되어 있지 않습니다.

ESCRIPTION.................................................................................................................................7

3 EXTERIOR.........................................................................................................................................8

3.1 P

3.2 P

RODUCT EXTERIOR ......................................................................................................................8

RODUCT DIMENSION ....................................................................................................................8

4 POWER & INTERFACE SPECIFICATION..................................................................................9

4.1 P

4.2 C

4.3 C

OWER SPECIFICATION..................................................................................................................9

URRENT CONSUMPTION...............................................................................................................9

OMMUNICATION SPECIFICATION .................................................................................................9

5 FUNCTIONS ....................................................................................................................................10

5.1 C

5.2 F

5.3 O

5.4 S

ARD DETECTION........................................................................................................................10

IRMWARE DOWNLOAD FUNCTION ..............................................................................................10

PERATION .................................................................................................................................10

TORAGE.....................................................................................................................................10

6 WARNING AND NOTICE..............................................................................................................11

7 WARRANTY & SERVICE.............................................................................................................12

㈜듀얼아이 4/12

NFC PAD Specification

1 Introduction

NFC PAD is contactless reader meets high security requirement and the latest

contactless standard. It supports Mastercard® Paypass, Visa ® Paywave with

contactless EMV complaint. Up to 8SAMs (Secure Access Modules) come standard

for payment system.

Also it gives user multiple connectivity such as USB, RS-232 & TCP/IP (option).

It is adopted secure communication comply with Master & Visa.

1.1 Product specification

ITEM Specification Note

CPU STM32F103ZGT6 (ARM Cortex_M3, 144pin) ST

Program Memory 1MBytes FLASH

Up to 32Mbytes external Serial Flash

(Default : 1Mbytes)

Data Memory 96KBytes SRAM

Up to 4Mbytes external PSRAM

(Default : 96Kbytes)

DISPLAY 4 Status LED (RED, BLUE, YELLOW, GREEN)

128*96 Graphic LCD (Yellow green )

Communication MINI USB 2.0 Full speed

RS-232

TCP/IP(option)

BUZZER Magnetic Buzzer

Contactless card ISO 14443 A/B,

SAM Class A,B, T=0,T=1 8 SAM SLOT

Input Voltage Adapter DC 5V

4 color

Reading Distance

: Maximum 5cm

㈜듀얼아이 5/12

NFC PAD Specification

1.2 RF PART Specification

ITEM Specification Note

Radio frequency 13.56MHz PN512

Comm. speed 106,212,424 Kbps EMV certification -106Kbps only

Subcarrier 847 KHz

Input Power 5V

1.3 SAM PART Specification

ITEM Specification Note

Protocol T=0,T=1

Class class A,B (5V, 3V)

Quantity 8

㈜듀얼아이 6/12

NFC PAD Specification

2 Structure

2.1 Components Confirmation

- NFC PAD

- Comm.cable (RS-232 Cable or USB Cable)
* 5V AC adapter (option)

2.2 Description

- MAIN MCU : STM32F103ZGT6 (ARM Cortex_M3, 144pin), 1Mbyts Flash,

96Kbytes SRAM

- RTC : included in LCD.

- Battery : Provides backup power RTC and secure memory while power is off.

- RF field : Adopt PN512 chip which supports ISO 14443 A/B

- Debug port : USB endpoint0 vendor protocol

- Host interface: USB, RS-232, TCP/IP(option)

- Buzzer : Max 94dBA, magnetic buzzer

- Status LED : 4 status LED comply with EMV.

- Power : Use DC5V adopter of USB(LCD brightness is weaker than adaptor).

- Tamer switch : When case is opened by force, it disconnect backup power for

security reason.

- LCD: 128*96 graphic LCD.

- Touch panel: Resistive touch panel

- SAM: 8 x SAM slots(ISO7816) comm. Speed up to 153600bps

- Memory extension: designed to extend program& data memory up to

32Mbytes & 4Mbytes.

㈜듀얼아이 7/12

NFC PAD Specification

3 Exterior

3.1 Product exterior

3.2 Product dimension

125mm*90mm*27mm

㈜듀얼아이 8/12

NFC PAD Specification

4 Power & Interface Specification

4.1 Power Specification

- DC 5V input(recommendable), USB 5V power supply(brightness is little

weaker than DC 5V Adaptor)

- Power usage: under 2W

4.2 Current consumption

- Default : 5V, under 200mA

- MAX : 5V, under 400mA (card read/write)

4.3 Communication Specification

- USB 2.0 FULL SPEED (12Mbps)

- RS-232 (115200bps)

- TCP/IP(option)

㈜듀얼아이 9/12

NFC PAD Specification

5 Functions

5.1 Card detection

- Comply with EMV PCD level 1

5.2 Firmware download function

- Downloadable via PC program(DeDownloader)Usage environment

5.3 Operation

- Temperature: -10 ~ 60 ℃

- Humidity : 30 ~ 90 % (relative humidity)

5.4 Storage

- Temperature: -20 ~ 80 ℃

- Humidity: 30 ~ 90 % (relative humidity)

㈜듀얼아이 10/12

NFC PAD Specification

6 Warning and Notice

- For indoor use only.

- This product is affected by an element like metal or Magnetism. So one has to

take precautions.

- This device is not waterproof.

- Recommended to use certified (UL/CE/FCC) adaptor.

- Recommended to use apart from metallic devices to maximize RF reading

performance.

EU

This product is CE marked according to the provision of the R&TTE Directive (99/5/EC). Here

by DUALi Inc. declares that this product is in compliance with the essential requirements and

other relevant provisions of Directive 1999/5/EC.

FCC STATEMENT

CAUTION: Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected. -- Consult the dealer or an experienced radio/TV technician for help.

㈜듀얼아이 11/12

NFC PAD Specification

7 Warranty & Service

 Warranty and Repair service

- DUALi Inc. warrants to the original consumer or other end user that this product, DE-632, is

free from defects in materials and workmanship for a period of 1 year from the date of purchase.

※ Note Warranty/non-warranty repair fees do not include any shipping charges.

 The damages(defaults) prescribed below are NOT to be covered by warranty.

- User’s misuse of part/component.

- Fault by the unqualified user’s own intention of repairs.

- Product’s inspection requirement.

- Adding certain functions or extension of system.

- Fault by User’s misuse against the product’s manual.

*Please contact our service team for the technical/ sales supports.

DUALi Inc.

1-308/310 Innoplex, 552 Wonchoen-dong, Youngtong-gu,
Suwon, Gyeonggi-do, Korea (zip: 443-380)
Tel : [phone]
Fax : [phone]
E-mail : [email protected]
Web-site : http://www.duali.com

㈜듀얼아이 12/12