Druck SPX3000 Data sheet
Industrial Pressure Transmitters
PRESSURE
INSTRUMENTS
SPX 3000 Series
The SPX 3000 Series combines modular design
with the latest advances in ASIC technology and
surface-mount electronics. This provides a lightweight, highly reliable and cost-effective solution
for a range of industrial pressure measurement
applications including factory automation, equipment monitoring and control, gas turbines, and any
other application where high-reliability is important. The rugged design with exceptional RFI/EMI
immunity gives the SPX 3000 the lowest “cost-ofownership” in the industry.
At the heart of the transmitter is piezoresistive
silicon technology , extensively proven in aerospace,
sub-sea, oil-field and many other applications
where the highest levels of performance and longterm reliability are required.
The sensor features a Hastelloy C276 isolation
diaphragm and is enclosed in an electron-beam
welded 316L stainless steel body. This rugged construction ensures full compatibility with a wide
range of pressure media and operating conditions.
On-site trimming of the transmitter output is
accomplished via non-interacting potentiometers
located beneath the electrical connector. The SPX
3000 offers the latest advancements in sensor technology from SI Pressure continuing our tradition of
superior performance at unbeatable prices.
Features
• Best performance-to-value on the market
• Any range between 1.5 and 10,000 psi
• ±0.15% FS accuracy
• NACE compatible Hastelloy C276 and 316L SS
• RFI/EMI protected to CE Heavy Industrial Standard
• Intrinsically-safe
• Exceptionally rugged and lightweight
FM
APPROVED
SPX 3000 Series Specifications
Pressure Measurement
Operating Pressure Ranges
Proof Pressure
(Overpressure)
Burst Pressure
Pressure Media Compatibility
Supply Voltage
Warmup Time
Response Time
Supply Sensitivity
Insulation Resistance
Surge Protection
(between connectors & case)
Output
Any pressure unit and (zero-based) span available between 1.5 psi and 1000 psi gauge;
between 1001 and 10,000 psi sealed gauge and
between 5 and 10,000 psi absolute
Compound ranges: -15 to 15, -15 to 30,
-15 to 100, -5 to 5 psi g
Alternate pressure units may be specified on order
6X FS for ranges 7.25 psi & below
4X FS for ranges 30 psi & lower
3X FS (3000 psi max) for ranges 2000 psi & lower
2X FS (15,000 psi max) for ranges 10,000 psi &
lower
8X FS for gauge ranges 7.25 psi & lower
6X FS for gauge ranges 30 psi & lower
4X FS (3500 psi max) for ranges 1000 psi & lower
3500 psi for absolute ranges 2000 psia & lower
15,000 psi for ranges above 2000 psi
Fluids compatible with a welded assembly of
Hastelloy C276 and 316L SS (NACE MR-01-75
compatible grades)
9 to 30 Vdc at the transmitter terminals
(9-28 Vdc for IS units)
Maximum load (Ω)=50X (V
500 ms max at power-up
1 msec
0.005% FS/volt
>10MΩ @ 500 Vdc (@68°F)
Ranges up to 2000 psi withstands 2kV spike
Ranges above 2000 psi withstands 1kV spike
2-wire, 4-20mA
Supply
-9)
Physical
Pressure Connection
Electrical Connection
Weight
Mechanical Shock
Vibration
Dimensions in inches
Wiring Details
+EXC -EXC Ground
Case
SPX 3001 Red Black Shield
SPX 3002 PINA PIN B PIN F
SPX 3003 PIN 1 PIN 2
1/4" NPT female
Optional adapters available
3 feet integral cable (longer lengths available)
6 pin bayonet connector
DIN 43650A plug/socket
For gauge ranges up to 1000 psig
SPX 3001 and SPX 3003 require vented cable
7 oz. nominal
1000g half sine wave, pulse duration 1ms and
100g peak half sine wave, duration 11ms, both in
each of 3 mutually perpendicular axes will not
affect calibration
Conforms to MIL-STD 810C, Method 514.2-2
Curve L
SPX 3003
SPX 3002
SPX 3001
Performance
Accuracy
Zero Offset and Span Setting
Long Term Stability
Operating Temperature Range
Temperature Effects
CE Conformity
Intrinsic Safety Approval
±0.15% combined non-linearity, hysteresis and
repeatability FS BSL
Factory set ±0.05mA. Further ±5% FS user
adjustment available via non-interacting
potentiometers
±0.1% FS/year
-40 to 210°F for non-cabled models
-40 to 175°F for SPX 3001
±1% FS TEB over 15 to 125°F
±2% FS TEB over -5 to 175°F
EMC Emissions: EN50081.1, EN55022
EMC Immunity: EN61000-6-2
10V/m Heavy Industrial
FM Class I, Div 1, Groups A,B,C,D
Ordering Information
SPX300 - -
Box A: Electrical Connection
1 = Integral cable $ 340
2 = 6-pin bayonet $ 375
3 = DIN 43650A plug/socket $ 340
Box B: Pressure Range
Specify required pressure range in psi*, for example:
00050 = 50 psi N/C
03000 = 3,000 psi N/C
Box C: Options
0 = None N/C
1 = 5-Point NIST calibration certificate $ 150
A B CBB B B
Specifications may change without notice.
* Other engineering scales available. Consult factory.
Loading...