D-Link DWM-652 User Guide

Download

DWM-652

3.5G Express Card

User Manual

65000100061 Rev. A

Version: 1.20

Contents

Chapter 1

Chapter 2

Chapter 3

Chapter 4

Chapter 5

Chapter 6

Getting Started 3 Connecting 8 SMS 12 Settings 14 Statistics & Information 17 Q&A 19

Chapter 7

Important Safety Information and Glossary

DWM-652

Chapter 1

Getting Started

Chapter 1

Getting Started

What’s in the box

1. DWM-652 :

Insert this into an ExpressCard Slot if available.

Before You Install

Information

Before installing the DWM-652, we recommend obtaining the following information from the SIM Card Mobile network operator:

Access Point Name (APN)

- For many carriers, the APN may simply be Internet.

Phone Number

- The Phone Number to dial to establish a network connection.

Password (Optional)

- Some (but not many) carriers require a password.

software helps input this number correctly.

D-Link

2. PCMCIA Adaptor Casing (optional):

Slide the DWM-652 in this casing if a PCMCIA slot is available.

3. USB Accessories

a.DWM-652 USB Adaptor Casing : Insert the DWM-652 (1) into

this case if no PCMCIA/ExpressCard slot is available and connect it to the PC with the USB Cable (3b).

b. USB Cable : Insert the small end into the Adaptor Casing (3a)

and the two large ends into the PC. Two free USB ports are required for maximum signal strength. The gray port can be shared with a mouse or keyboard.

c. Notebook Screen Hook : Secures the DWM-652 to a laptop

computer screen.

Insert SIM Card

1. Face the gold contact points toward each other.

2. Insert the SIM card into the slot.

3. Push the card in until it reaches the end of the arrow next to the slot.

Hardware Installation

With the SIM card properly inserted, the installed into the computer, which may be done via PCMCIA/ExpressCard Slot or USB port.

DWM-652

may now be

Features

● Worldwide Roaming

● Supports 2G, 3G and 3.5G standards

● SMS Messaging

● USB, ExpressCard or PCMCIA Interface

● Windows Vista, XP and 2000 compatibility

● Does not interfere with other USB

peripherals

● Six language interface (English, French, German, Italian, Spanish and Traditional Chinese)

● Plug & Play functionality

● Dual Antennas

ExpressCard Slot

1. Slide the DWM-652 into the slot (SIM card side down, LED side up).

2. The LED should light up when connection is established.

Chapter 1

PCMCIA Adaptor*

1. Slide the DWM-652 into the PCMCIA Adaptor (LED & Gold Strip Up, SIM Card Side Down) as far as possible.

* PCMCIA Adapter is sold by separated

Getting Started

Software Installation

The process and appearance of certain software elements in Windows Vista will be somewhat different than in 2000/XP. These differences are minor and should not limit the functionality of the way.

DWM-652

in any

New Hardware Detection

Windows 2000/XP

2. With the same orientation (antenna side up), slide the DWM-652 - Adaptor unit into the PCMCIA slot.

Once the Toolbar Hardware Connection Icon. The device will be identified as the

D-Link DWM-652

Windows Vista

In Vista, a pop-up window may appear. Click After the first pop-up, all other aspects for software installation will be

identical in all compatible versions of Windows.

DWM-652

is connected, a dialog box should pop-up from the

3.5G HSDPA Utility.

to proceed.

Allow

3. The LED should light up when connection is established.

USB Adapter

1. Slide the DWM-652 into the USB adaptor casing (USB adaptor label & DWM-652 LED side up).

2. Insert the small USB plug into the adaptor casing. Insert the two large USB plugs into the computer.

3. The LED should light up when connection is established, though it may be obscured.

Software installation should proceed automatically . If it does not, it may be initiated from My Computer, where the as a CD-ROM device. Sometimes a restart will occur during installati on. If it does, reinitiate installation from My Computer.

DWM-652

will be identified

Chapter 1

Getting Started

InstallShield Wizard

Preparation

Select Installation Folder

The

DWM-652

OS, if available.

will automatically use the appropriate language for your

Welcome

The Setup Wizard window opens automatically. The first page contains OS compatibility and legal disclaimers. Click

to continue.

License Agreement

Click

Change

to manually select a folder.

Change Current Destination Folder

Highlight the folder and click Browse window.

to select it. Click

Confirm Installation

Cancel

to close the

Click

I accept the terms in the license agreement > Next

continue.

Click

Install

to change any preceding information or settings. Click

Back

to begin installation.

Chapter 1

Installation

Getting Started

Installation Complete

Installation time will vary, depending on the computer.

Home Screen

When installation is complete, click Finish to exit. The Connection Manager will open automatically and bring up the Home Screen. The Quick Start Guide will also automatically open, but only if you have Adobe Acrobat 6.0+.

1. Signal Strength

2. Minimize

3. Radio Technology

4. Mobile Network Operator

5. Connection Status

6. Connection Time Elapse

7. Total Data Uploaded

8. Total Data Downloaded

9. Compose Message

10. Radio On/Off

11. Menu

12. Home Screen

13. Connect/Disconnect

The Home screen only indicates 3G (internet) connection status.

Note:

After installation, the functions upon successful connection to the computer. Text messages can be sent or received, even if the Home screen indicates no connection.

DWM-652

Menu Screen

Text message folders such as Inbox, Draft, etc.

SMS: Setting: Statistics: Contacts: DWM-652 Profile: Information:

General, SMS, SIM, Radio and Network preferences.

Upload, Download graphs and totals.

, SIM Card and Outlook Contact lists.

Connection profile setup/options.

Device, Version and Signal specifics.

automatically initiates 2G (SMS)

DWM-652

Chapter 2

Connecting

Chapter 2

Connecting

Establishing a Connection

With the made. The default profile, which should work in the vast majority of cases. To test it, simply click the Connect button.

DWM-652

fully installed, an online connection can now be

DWM-652

will automatically scan your system and create a

7. Enter the phone number for establishing the wireless connection, supplied by the SIM card carrier; click Next.

Connection should take about 5 seconds. When established, the Home screen should say Connected, with the onscreen clock running

and the Download/Upload tallies running. The toolbar icon also change color to indicate the connection protocol (same as LED

indicator). See Specifications for details. If connection is unsuccessful, check that the device and SIM card are

properly connected and inserted. If they are, a new internet profile may need to be created.

will

8. The Finished window is a double check of the Profile Name, which can be modified here. If profile settings need to be changed, click

Back. If everything is fine, click Finish.

Create a Profile

1. Click Menu > Profile. The profile menu will contain the DWM-652 default profile, named D-Link.

2. Click New to create a new profile. Depending on the carrier, all 4 spaces may not need to be filled to proceed.

9. On the Profile window, click the newly created profile and then click Default. Click OK to set this profile as the default (only the default can be connected).

10. The D-Link DWM-652 is now ready for a wireless connection. Click the Connect icon to establish it. Connection should take about 5 seconds. When established, the Home screen should say

Connected, with the onscreen clock running and the Download/ Upload tallies counting.

If you switch to a different SIM card, the default profile will no

Note:

longer be valid. You will have to create a new profile in the manner just described. If you do not have access to all the information necessary to create a new profile, uninstall and reinstall the work for the new SIM card.

software. The new default profile should

D-Link

Choose a Profile

Different profiles may be needed, depending on current location.

1. Click Menu > Profile.

3. Choose a Profile Name. The name is arbitrary and is helpful when different connection methods are available.

4. Inquire with the Mobile network operator (SIM carrier) as to whether the User Name and Password are required.

5. The Password can be any combination of letters, numbers or symbols and is case sensitive.

6. Enter the Access Point Name (APN), supplied by the SIM card carrier. With all required slots filled, click Next.

2. Highlight the desired profile and click Default.

Chapter 2

Connecting

Chapter 2

Connecting

3. Click OK on the confirmation window if this is the desired profile.

General

Connect using

If other modems are available, they will be listed here. Click to adjust the

D-Link

modem settings.

Configure

Phone number

4. The word YES will appear next to the default profile.

Profile Properties

Profiles can be fine tuned after creation. In the Profile window, simply click highlight it and then click the Properties menu, General Tab.

to adjust the default profile. To adjust a non-default profile,

Edit

. Click

on the Edit window to view

Check

Use dialing rules

add more specific dialing information such as

current region, area & carrier code

number

Click OK when completed.

This and other Properties menu tabs are generic to the Windows OS and will not be discussed further.

to access the Location Information window to

, and

tone/pulse dialing

outside line access

Connecting & Disconnecting

If a default profile has been selected, a connection can be made or ended at any time by clicking the Connect button on the Menu screen. However, connection status will not be obvious unless the Home screen is displayed. The Statistics or Signal Information windows also clearly display connection status.

DWM-652

Chapter 3

SMS

Chapter 3

SMS

The Connection Manager allows the same standard SMS options as any other mobile device. Each message stored in the Inbox, Outbox, Sent and Draft folders displays the Name and Number of the contact, the body text of the message and the date it was stored in the folder.

Compose

Contains all tools for creating messages.

Contains the Phone Number of the recipient.

To: Message Body:

Up to 160 characters.

Inbox

Contains received messages. Save, Delete or Reply to Inbox messages by highlighting them and pressing the appropriate button. Highlight a message to make it scroll open above. Unread messages are closed envelopes while read messages are open.

Press to see contact lists.

- SIM Card Contacts

- Outlook Contacts

DWM-652

Contacts

Sent

Contains all successfully sent messages. Highlight a message and press

Delete

to erase it.

Outbox

Contains completed but unsent messages. Send or Delete messages by highlighting them and pressing the appropriate button.

Highlight a Contact and click the Compose screen.

Click

Template

Highlight a template and click Select to insert it into the message. Click

New

template to the list of existing ones. Click Template list window.

Highlight a template and click

to view all stored templates, or create/delete one.

to create a new template. Click

to choose it. Click

Select

to erase it.

Delete

to add the new

Save

to return to the

Cancel

to return to

Exit

Draft

Contains saved but unﬁnished messages. Highlight a draft and click

to send the message back to the Compose window.

Edit

DWM-652

Chapter 4

Settings

Chapter 4

Settings

General

Check Auto connect on startup to have the internet automatically during startup. If speed is essential, clicking Quick startup will cause the auto startup to proceed even faster. However, if you plan to install the disable the connected to the computer when you turn it on when Quick startup is enabled.

Quick startup

DWM-652

function. Do not have the

DWM-652

onto multiple computers,

connect to the

DWM-652

If a PIN code is enabled, it will be asked for during SIM card initialization. After 3 incorrect PIN code entries, the SIM card will be locked. Contact your operator to unlock it.

Radio

Dual Mode- Features various network search options. Note that 3G (including 3.5G) First is the default setting.

Language

The Connection Manager offers English, French, German, Spanish, Italian and Traditional Chinese. To choose a language, click the menu and highlight & select a language. Click language. The Connection Manager will then return to the Home Screen with the chosen language.

to implement the chosen

Save

SMS

Preference

New SMS Notify: Check to be notiﬁed when a new text message arrives. If enabled, the Toolbar Connection Manager Icon will change to an Envelope Icon. An envelope icon will also appear in the upper left corner of the Home screen when a new message arrives.

SMS Service Center

Use default number in phone: Uncheck to manually input service center number.

Click

after making any changes.

Save

Frequency Band

Save network scanning time by eliminating unnecessary frequencies or choose Worldwide if local standards are uncertain.

After making changes to either, click

Apply

Network

Network Selection

Standard (auto)

Prefer list. Click list.

Search for networks in the order speciﬁed in the

Standard (auto)

to view and adjust the Prefer

SIM

Enable/Disable or change the SIM card Personal Identiﬁcation Number (PIN). Press must be inserted for this function to be active.

after making any changes. A SIM card

Apply

The top list is the Prefer list; the bottom lists all available networks. Click

In the Prefer list, highlight a network and click the up arrow to the left to move it up the list (increase its preference); clicking the down arrow does the opposite. Clicking the red icon removes the highlighted network from the Prefer list.

In the bottom list, highlight a network and click the up arrow above to move that network to the Prefer list.

to bring up the list of all available networks.

Scan

Chapter 4

Settings

If changes are made, click

Save

Manual

Choose a network from all available. Click list. Highlight a network and click

Cancel

Note that connected to a network.

Network

can only be accessed when the

. If no change is needed, click

Select

Manual

to see the

DWM-652

is not

DWM-652

Chapter 5

Statistics & Information

Chapter 5

Statistics & Information

Statistics

The Statistics screen displays a graph of recent upload and download activity. If there is no data, the

Statistics

DWM-652

is ofﬂine. Click

Signal

Click the will be empty when there is no connection or during a 2G connection. Displayed indicators will vary, depending on your protocol.

tab to see signal data. The bottom half of the screen

Signal

Elapsed Connection Time

Time:

- Returns to zero upon disconnection

- Reset does not affect it Maximum Throughput

Max: Download: Upload:

Click the actual connection. To leave this window, click

Current Downloading Throughput

Current Uploading Throughput

to end the current graphs and start over. This will not af fect

Reset

Exit

Information

The Information screen offers version or signal speciﬁcations. Click

Information

About

Click

IMEI: Version: F/W Version:

International Mobile Equipment Identity number

Connection Manager Software Version

Information

Firmware Version

About

tab to see version data.

ARFCN: Tx & Rx Power:

(dBm)

Frequency: Active Set: Primary Scramble Code: Ec/Io:

See Glossary

Transmission/Reception strength, in decibel meters

In MHz UMTS cell actually transmitting data, marked YES

Reception/Interference (S/N), Connected (3G) in decibels (dB)

Connected (2G)

Connected (3G)

Individual UMTS cell ID code

DWM-652

Chapter 6

Q&A

Chapter 6

Q&A

Q: I am trying to install the DWM-652 onto

another computer, but the software installation window is not opening, nor is there an icon in

Quick startup has already been enabled on a different computer.

Reconnect the There are two ways to do this.

1. Click and click

2. This method varies depending on the OS.

Vista / XP

a. Right-click on

Bus controllers

choose CDROM USB Device.

Enable

DWM-652

Save

My Computer

to that computer and disable this function.

Setting

. See Chapter 4 for more information.

My Computer

. The

General

. Right-click

DWM-652

tab. Uncheck Quick startup

> Manage

USB Mass Storage Device

should now appear as a

, what do I do?

Universal Series

and

Make sure that the

and No Device is still displayed, check the LED.

If the LED is not lit, the problem could be:

- The USB cord or adapter casing is not functioning (if applicable).

- The

DWM-652

- The USB port or PCMCIA/ExpressCard Slot is not active. Check the Device Manager.

DWM-652

is not slid correctly into the adapter casing.

Q:The Home screen is stuck on

is plugged in/inserted correctly. If it is,

Initial SIM Card

what do I do?

Replug/reconnect the

computer. If this does not work, check the SIM card, which may have a poor connection or be locked.

DWM-652

. If this does not work, restart the

Q: Why does the DWM-652 need 2 USB ports?

This is necessary to supply sufﬁcient power to transmit during peak

loads and to avoid dropped calls.

Vista

b-1 (XP): The InstallShield Wizard should start running

b-2 (Vista): Shortly after enabling the

automatically . If it does not, click on the Computer. The software will reload as seen in Chapter 1.

window may pop-up. Choose AUTORUN_

DWM-652

.EXE

DWM-652

D-Link

, an AutoPlay

Q: Why does the Home screen display

Device

icon in My

Q: The SIM card is working, so why can’t the

DWM-652 make a connection?

Check the proﬁle information; click

for details. If proﬁle settings are in order, the radio or network settings may

need adjustment. Click If Radio and Network settings are in order, please check the signal strength indicator in the upper left corner of the Connection Manager.

Setting

. See Chapter 4 for details.

Proﬁle

. See Chapter 2

Q: How do I import contacts into the

Connection Manager?

Click

- Import from the SIM Card.

- Import from Outlook.

- Import from the

Contacts

DWM-652

Contacts folder.

Q: After unblocking my SIM card, the

Connection Manager asks for a PIN. What do I do?

Input the password as 0000. After inputting this passw ord, change it

for security.

Chapter 6

Q&A

Q: Can I prevent others from using my

DWM-652 ?

Yes. Click

PIN code.

Setting

to enable or change the SIM card

SIM

Q: The Connection Manager is prompting me

that my SMS service center number is invalid. What do I do?

Q: Can I use the Connection Manager on an

airplane?

Yes, you can simply unplug the

compose messages, adjust most settings, or perform other Connection Manager functions. However, removing the SIM card, while keeping the unplugging it. Removing the SIM card will cause the Connection Manager software to close after a few moments.

You may also keep the Click the Connection Manager RF icon; if the X is on, the radio is off and the

DWM-652

is safe for in-ﬂight use.

DWM-652

plugged in, is not the same as

DWM-652

. This will allow you to

plugged in, but in Flight Mode.

Radio On Radio Off/Safe

Click

Chapter 4

Setting

for details.

and change the SMS service number. See

SMS

Q: The InstallShield Wizard does not

automatically open when I ﬁrst plug in the DWM-652, what do I do?

In My Computer, right click on the drive with the Connection

Manager icon and select AutoPlay. This should initiate the InstallShield Wizard.

D-Link DWM-652

(H:)

Q: My computer cannot boot with the DWM-652

connected. Why?

As discussed in Chapter 1, during installation the

displayed in My Computer as a portable storage device.

DWM-652

The words Flight Mode will also appear on the Home Screen.

Q: My OS is Microsoft 2000 SP4, so why is

software installation still not working?

Two more Microsoft HotFix downloads are needed:

1. KB893803: Windows Install 3.1 http://www.microsoft.com/downloads/deta ils.aspx?FamilyID=889 48 2f c-5

f56-4a38-b838-de776fd4138c&displaylang=en&Hash=PAFe2q2M7AK WEGBcm62PeiJS4ViwKMUiwH7KOHOV4d4P8gXcVDuwnXIDI9LT%2b qx85W4mPHaGPwG4ne6KUKaD3Q%3d%3d#ﬁlelist

2. KB842773: Windows 2000 HotFix (Update for BITS 2.0 and WinHTTP 5.1)

http://www.microsoft.com/downloads/details. aspx?FamilyID=3ee866a0-3a09-4fdf-8bdb-c906850ab9f2&DisplayLan g=en

Q: Why do some SMS text symbols display

The computer treats the this, your computer may be trying to boot from it, as if it were expecting a Boot CD. Disconnect the

DWM-652

as if it were a CD drive. Because of

DWM-652

incorrectly on the receiving phone?

This is related to the different decoding schemes used by various

mobile phone brands. Known problem symbols include: ~ ! @ # $ % ^ & * ( ) _ + ` - = { } | : “ < > ? [ ] \ ; ‘ , . /

Q: How do I view the .pdf Quick Start Guide and

User Manual?

Click

utility and choose either document, both of which require Adobe Acrobat 6.0.

Start

Programs

D-Link > D-Link DWM-652 3.5G HSDPA

before booting.

Chapter 6

Q&A

Q: The Connection Manager is having troubles

running on Vista. What do I do?

You may be having a problem with Vista’s user control functions.

1. Open the Connection Manager folder.

2. Right click

3. Check

Run this program as an administrator

CManager.exe > Properties

Compatibility

tab.

4. Click

Apply

> OK.

DWM-652

Chapter 7

Important Safety

Information and Glossary

Chapter 7

Important Safety Information and Glossary

Safety Information

Regulations

Important Notice

Due to the transmission and reception properties of cellular communications, data can occasionally be lost or delayed. This can be due to the variation in radio signal strength that results from changes in the characteristics of the radio transmission path.

Although data loss is rare, the environment where you operate the

DWM-652

signal strength are referred to as fading. Fading is caused by several different factors including signal reﬂection, the ionosphere, and interference from other radio channels.

D-Link Corporation . or its partners will not be held responsible for damages of any kind resulting from the delays or errors in data transmitted or received by the

D-Link DWM-652 D-Link

may adversely affect communications. Variations in radio

to transmit or receive such data.

D-Link DWM-652

is a registered trademark of D-Link Corporation

, or failure of the

Potential Hazards

Do not operate the susceptible to radio interference resulting in danger; speciﬁcally:

Areas where prohibited by the law.

- Follow any special rules and regulations and obey all signs and notices. Always turn off the host device and remove the from the card slot when instructed to do so, or when you suspect that it may cause interference or danger.

Where explosive atmospheres may be present.

- Do not operate your explosive atmosphere may exist. Sparks in such areas could cause an explosion or ﬁre resulting in bodily injury or even death. Be aware and comply with all signs and instructions.

- Users are advised not to operate the point or service station. Users are reminded to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress.

- Areas with a potentially explosive atmosphere are often but not always clearly marked. Potential locations can include gas stations, below deck on boats, chemical transfer or storage facilities, vehicles using liqueﬁed petroleum gas (such as propane or butane), areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine.

Near Medical and life support equipment.

- Do not operate your equipment, life support equipment, or near any equipment that may be susceptible to any form of radio interference. In such areas, the host communications device must be turned off. The may transmit signals that could interfere with this equipment.

On an aircraft, either on the ground or airborne.

- In addition to FAA requirements, many airline regulations state that you must suspend wireless operations before boarding an airplane. Please ensure that the host device is turned off and your is removed from the card slot prior to boarding aircraft in order to comply with these regulations. The that could interfere with various onboard systems and controls.

While operating a vehicle.

- The driver or mobile network operator of any vehicle should not operate a wireless data device while in control of a vehicle. Doing so will detract from the driver or mobile network operator’s control and operation of that vehicle. In some countries, operating such communications devices while in control of a vehicle is an offense.

D-Link DWM-652

DWM-652

in an environment that may be

DWM-652

in any area where a potentially

DWM-652

in any area where medical

DWM-652

while at a refueling

DWM-652

can transmit signals

CE Marking

This device has been tested to and conforms to the regulatory requirements of the European Union and has attained CE Marking. The CE Mark is a conformity marking consisting of the letters “CE”. The CE Mark applies to products regulated by certain European health, safety and environmental protection legislation. The CE Mark is obligatory for products it applies to: the manufacturer afﬁxes the marking in order to be allowed to sell his product in the European market.

This product conforms to the essential requirements of the R&TTE directive 1999/5/EC in order to attain CE Marking. A notiﬁed body has determined that this device has properly demonstrated that the requirements of the directive have been met and has issued a favorable certiﬁcate of expert opinion. As such the device will bear the notiﬁed body number 0678 after the CE mark.

The CE Marking is not a quality mark. Foremost, it refers to the safety rather than to the quality of a product. Secondly, CE Marking is mandatory for the product it applies to, whereas most quality markings are voluntary.

Marking: The product shall bear the CE mark, the notiﬁed body number(s) as depicted to the right. CE 0678.

15.21 Federal Communications Commission (FCC) Statement

You are cautioned that changes or modiﬁcations not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.

15.105(b) Federal Communications Commission (FCC) Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

You are cautioned that changes or modiﬁcations not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Operation is subject to the following two conditions:

1) this device may not cause interference and

2) this device must accept any interference, including interference that may cause undesired operation of the device.

Chapter 7

Important Safety Information and Glossary

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

SAR compliance has been established in a laptop computer with side PCMCIA ExpressCard slot conﬁguration as tested in this ﬁling, and can be used in laptop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all ﬁnal host conﬁgurations is the responsibility of the Grantee. End-users must be provided with speciﬁc information required to satisfy RF exposure compliance for all ﬁnal host devices.

Speciﬁcations

System Requirements

Operating System: Windows 2000 SP4+, XP SP2+ or Vista Hard Drive Space: 30 MB Web Browser: Internet Explorer 6.0+ Interface: ExpressCard slot, 2 USB ports or PCMCIA slot

LED Indicators

Color Indicator Flashing Solid

Off

Red SIM Card/Service

Green WCDMA Available Connected

Blue HSDPA NA Connected

Pink/Purple / GPRS/EDGE Available Connected

Hardware

Dimensions: 119.6 x 42 x 11.3mm (LWH, including antenna) Weight: 40g Onboard Memory: 64 MB NAND Flash & 64 MB SDRAM GSM Bands: 850, 900, 1800, 1900 UMTS Bands: 850, 1900, 2100

Connectivity

Internet: DUN Data Speed (HSDPA) Downlink: 7.2Mbps/3.6Mbps/1.8Mbps/

in bps: 384Kbps Uplink: 384Kbps (Max) Radio/Band Selection: 3/3.5G: EU+Asia (2100), US (850/1900) 2G: EU+Asia (900/1800), US (850/1900) IP Settings: APN, DNS, DHCP vs. Static, Radius

Not Connected/

Flight Mode

NA NA

No coverage/

still searching

Error (SIM card

missing, failed

verification)

Glossary

Second-generation mobile networking technology. Represents a

2G:

switchover from analog to digital; most 2G networks use GSM.

Third-generation mobile networking technology that enables

3G:

simultaneous transfer of voice and non-voice data; most 3G networks use WCDMA.

A more recent standard of mobile networking technology;

3.5G:

generally uses HSDPA.

APN (Access Point Name/Network):

information. Consists of:

Network ID: Identiﬁes the external service requested by a GPRS

Mobile network operator ID: Speciﬁes routing information.

ARFCN (Absolute Radio Frequency Channel Number):

speciﬁc ID numbers for all radio channels used in cellular mobile communications.

Bps (bits per second): DNS (Domain Name System):

the addressing process more user-friendly.

DHCP (Dynamic Host Conﬁguration Protocol):

IP addresses from a server.

DUN (Dial-Up Network):

access via a modem.

EDGE (Enhanced Data GSM Environment/Enhanced Data for Global Evolution):

other data needing greater bandwidth at up to 237 kbps.

GPRS (General Packet Radio Service):

up to 86 kbps.

GSM (Global System for Mobile Communications):

popular cellular network, mostly operates in 850-900 or 1800-1900 MHz; the primary 2G system.

IMEI (International Mobile Equipment Identity):

each GSM/UMTS device that can be used block network access by a stolen mobile device.

IP (Internet Protocol): HSDPA (High Speed Downlink Packet Access):

that delivers bandwidth intensive data at up to 7.2Mbps; typically associated with 3.5G.

Kbps (Kilobits per second): LAN (Local Area Network):

good bandwidth.

Mbps (Megabits per second):

bits/second.

PPP (Point-to-Point Protocol): PIN (Personal Identity Number):

card security code; allows access to the carrier’s network.

Shorthand for Reception.

Rx: SIM (Subscriber Identity Module):

mobile device identiﬁcation, subscription and contact information.

SMS (Short Messaging Service):

characters.

Shorthand for Transmission.

Tx: WCDMA (Wideband Code Division Multiple Access):

EDGE that supports 384kbps data standard; aka UMTS.

user.

How data ﬂow is measured.

Windows component that enables online

Advanced GPRS that delivers multimedia and

Routes packets over a network.

A data ﬂow measure; 1024 bits/second.

A data network with limited range but

Provides GPRS routing

The

Helps route network trafﬁc by making

How devices obtain

Delivers data in packets at

The most

A number unique to

Advanced WCDMA

A data ﬂow measure; 1,048,576

An internet connection method.

Four to eight digital numbers SIM

A small card that contains key

Allows text messages of up to 160

Advanced

ﬂow. Most 3G networks use this

D-Link DWM-652 User Guide

Specifications and Main Features

Frequently Asked Questions

User Manual

Getting Started

Connecting

Settings

Statistics & Information