D-Link DWM-110 User Manual

Table of Contents
Introduction...........................................................1
包裝內容.............................................................2
系統規格的要求..................................................2
產品特色.............................................................2
硬體簡介.............................................................3
硬體安裝.............................................................4
開始之前.............................................................4
DWM-110 WiMAX 連結工具..................................5
Installing the Utility.............................................5
WiMAX 連結工具軟體........................................ 9
使用者登入 User Login................................... 9
設備資訊 Device Information....................... 11
幫助說明 Help............................................... 11
Technical Specifications..................................... 12
Warning Statement............................................. 13
Chapter 1 – Product Overview
Introduction
D-Link DWM-110 是 符合 IEEE 802.16e-2005 標準的無線寬頻 USB網路卡, 透過工具軟體可簡單地完成網路設置,享受高速且不 受地點限制的網路連線. 只要簡單地幾個步驟, 就可以開始快速飆網!!
D-Link DWM-110 User Manual
1
Chapter 1 – Product Overview
DWM-110 IEEE 802.16e WiMAX USB 網路卡
CD-ROM 包括使用者手冊/WiMAX 工具軟體
電腦須具備下列規格:
至少有一個 USB 2.0 介面
Windows XP/Vista
WiMAX 工具軟體
符合 IEEE802.16e-2005 WiMAX 標準
支援工具軟體管理網路卡的連線及設定
安全認證機制
包裝內容
系統規格的要求
產品特色
D-Link DWM-110 User Manual
2
Chapter 2 – Overview
硬體簡介
Power LED: 當顯示穩定的
綠色燈號時, 表示該網路卡 已準備好可以等候連線
D-Link DWM-110 User Manual
3
Chapter 2 – Overview
硬體安裝
1. 您的電腦必須支援 USB 插槽.
2. 請連接 DWM-110到電腦的 USB插槽 .
備註
: 在將DWM-110連接到電腦前, 請確定你已安裝WiMAX工具軟體. 該工具軟體已包含WiMAX 網路卡驅動程式.
開始之前
在開始安裝工具軟體前, 確定您的電信業者提供下列使用者帳號/密碼
D-Link DWM-110 User Manual
4
Chapter 3 – DWM Series WiMAX Utility
DWM-110 WiMAX 連結工具
該連結工具(MTW) 可協助使用者設定該 Wimax 網路卡的相關設定. 您可能需要電信業者所提供的相關資訊進行設定, 才能使用 WiMax 的服務
Installing the Utility
請將 DWM-110 WiMaX網路卡連接到到電腦的 USB插 槽。
找到 D-Link Setup.exe執行檔, 並點擊兩次該檔案.。 按下一步繼續
D-Link DWM-110 User Manual
5
Chapter 3 – DWM Series WiMAX Utility
選擇安裝開始安裝。
軟體會自行安裝, 使用者可透過狀態檢示安裝進度。
D-Link DWM-110 User Manual
6
Chapter 3 – DWM Series WiMAX Utility
如果您的電腦跳出該視窗, 請按繼續安裝
請選擇自動安裝軟體”, 並按下一步繼續
請選擇自動安裝軟體”, 並按下一步繼續
D-Link DWM-110 User Manual
完成上述步驟後, 如果電腦仍出現”新增硬體精靈”畫面, 請依上述說明完成設定。
7
Chapter 3 – DWM Series WiMAX Utility
軟體會自動尋找 DWM-110網路卡, 完成後選擇"啟動 WiMAX 工具", 下一步繼續
完成安裝後, 工具列會出現 MTW 工具軟體(如下圖) 您可以點擊兩次 M-Taiwan 圖示啟動 WiMAX 工具軟體
D-Link DWM-110 User Manual
8
Chapter 3 – DWM Series WiMAX Utility
WiMAX 連結工具軟體
使用者可點選您的電腦: 開始(Start) >所有程式( Programs) > D-Link > DWM-110 WiMAX 網路卡 > D-Link WiMAX 工具, 或是 按兩次 圖示 (位於工具列) 啟動連結工具軟體.
使用者登入 User Login
點選 進入登入頁面。 請從[認証點]的下拉式選單選擇網路業者的名稱,並且輸入
網路業者所提供的帳號與密碼。 認證點-請從下拉式選單選擇網路業者的名稱 (相關的訊息
必須由您的網路業者所提供)。
新增認證點-請從下拉式選單中點選「新增」。輸入認証點 名稱及認証點。點選「確認」按鍵將其加入清單中
編輯-可修改或刪除相關網路業者訊息,完成後點選「確 認」按鍵儲存設定。
備註:設備在出廠時已預設設定相關網路業者的訊息,這
些資料是無法被編輯與刪除的。
點選 假如連線失敗,診斷視窗將會告知您發生連線失敗的可能
原因。
開始進行設備與基地台的連線。
D-Link DWM-110 User Manual
9
Chapter 3 – DWM Series WiMAX Utility
連結狀態 Connection Status
本頁面顯示 WiMAX 連線狀態。若本設備沒有連線至
基地台將不會顯示網路地址 網路業者: 顯示所連結的電信業者網路. 網路位址: 顯示取得的 IP位址, 由電信業者所提供. 上傳總量: 顯示已使用的上傳傳輸資料量 下載總量: 顯示已使用的下載傳輸資料量. 上傳速度: 表示上傳的傳輸速度
.
下載速度: 表示現在下載的傳輸速度 使用時間: 該資料顯示使用者所累計的連線時間
D-Link DWM-110 User Manual
10
Chapter 3 – DWM Series WiMAX Utility
設備資訊 Device Information
用來檢視設備的相關訊息. 包括產品的:
實體位址(MAC address) 軟體版本(Software version) 韌體版本(Firmware version) 硬體版本( Hardware version)
會員服務 Service 幫助說明Help
會自動幫使用者連結到電信業者的網頁, 以提供更多
的支援與服務
D-Link DWM-110 User Manual
提供該工具軟體的使用說明
11
Appendix B – Technical Specifications
Technical Specifications
Frequency Range
2.5GHz radio front-end cover from 2.5GHz to 2.7GHz (NCC Frequencies 2.5025~2.6875GHz )
RF/Antenna
Transmit power 23dBm
Embedded antenna
Support MIMO Matrix A processing
Modulation
Support QPSK, 16QAM, 64QAM modulation (DL)
Mode
Support TDD (Time Division Duplex) mode
Standards
IEEE 802.16e-2005
Interface
USB 2.0
LED Indicator
Power
Authentication
Support PKMv2 protocol, EAP-based authorization, EAP-TLS, EAP-TTLS.
Utility
Device drivers: Windows XP/Vista
D-Link DWM-110 User Manual
12
Appendix B – Technical Specifications
Warning Statement
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
===== RF Exposure statement for mobile device without SAR measurement======
IMPORTANT NOTE: FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
D-Link DWM-110 User Manual
減少電磁波影響,請妥適使用
13
Loading...