
Quick Installation
D-Link’s Single Patch Flat Antenna offers the most
cost effective solution for extending the wireless LAN
coverage area. The antenna is fully compatible with all
products and can be used with any 2.40 to 2.4835 GHz
products.
Installation:
1. Remove the original antenna from your wireless
device.
2. Screw the DWL-R60AT connector into your wireless device.
3. Adjust the antenna to the suitable direction for extending the wireless
coverage area.
Specifications:
Operating Frequency:
-2400 to 2500 MHz
ntenna Type:
-Micro-strip Patch
VSWR:
-2.0:1 Max.
ntenna Gain:
-6.0dBi Typ.
olarization Type:
-Linear
Cross-Polarization Level:
3 dB Beam-width:
- 70° @H-plane
- 85° @H-plane
ntenna Dimension:
- 80 x 85 x 12.8 mm
levation Adjustment Range:
- 0 to 180°
zimuth Adjustment Range:
- 0 to 360°
ntenna Connector Type:
- SMA-reverse with RG-178 Cable
-18 dB Min.
Front-to-Back gain Ratio:
-13 dB Min.
1