D Link DSL-2650B User Manual
Section 3 – Configuration
DSL
To access the DSL Settings window, click the DSL Setup button in the Advanced Setup directory.
This window allows you to select the desired modulation, phone line pair,
and capability. Click the Save/Apply button when you are finished.
Click the Advanced Settings button to select a DSL test mode.
D-Link DSL-2650U User Manual
65
Section 3 – Configuration
Select the desired DSL test mode and then click the Apply button.
Click the Tone Selection button to modify the upstream and downstream
tones.
Select the appropriate upstream and downstream tones for your ADSL
connection. Click the Apply button to let your settings take effect.
D-Link DSL-2650U User Manual
66
Section 3 – Configuration
Print Server
To access the Print Server window, click the Print Server button in the Advanced Setup directory.
Tick the Enable on-board print server check box to support the print
server.
Click the Save/Apply button to save the changes.
Port Mapping
To access the Port Mapping window, click the Port Mapping button in the Advanced Setup directory.
Use this window to enable port mapping. Tick Enable virtual ports on
and enter
If you are setting up the mapping groups, click the Add button.
D-Link DSL-2650U User Manual
67
Section 3 – Configuration
To create a new mapping group, enter Group Name, add interfaces to
Grouped Interfaces.
Click Save/Apply to save the changes.
D-Link DSL-2650U User Manual
68
Section 3 – Configuration
PPTP
To access the PPTP Setting window, click the PPTP button in the Advanced Setup directory.
To set up Point-to-Point Tunnel Protocol, tick the Enable check box, enter
the appropriate information in the fields offered, and then click the
Save/Apply button when you are finished.
D-Link DSL-2650U User Manual
69
Section 3 – Configuration
Samba Config
To access the Samba Config window, click the Samba Config button in the Advanced Setup directory.
To activate the Samba function, tick the Enable Samba check box, and
enter the NetBios Name and Directory Name.
Click the Save button to enable the function.
D-Link DSL-2650U User Manual
70
Section 3 – Configuration
Wireless
To access the Wireless window, click the Wireless button in the Advanced Setup directory.
Security
In order to protect the privacy, you can setup the wireless security.
Available Network Authentication methods are Open, Shared, 802.1X,
WPA, WPA-PSK, WPA2, WPA2-PSK, Mixed WPA2/WPA and Mixed
WPA2/WPA-PSK.
Click Save/Apply to save the settings.
MAC Filter
This page can help you to allow or deny certain MAC addresses to pass
through or block out.
Click Add to see the following page.
D-Link DSL-2650U User Manual
71
Section 3 – Configuration
Enter MAC Address and click Save/Apply to add the MAC address to
MAC filter.
Wireless Bridge
This page allows you to configure bridge features of the wireless LAN.
Click Refresh to update the remote bridges.
Click Save/Apply to save the settings.
D-Link DSL-2650U User Manual
Advanced
72
Loading...