10/100Mbps Unmanaged Switch With Gigabit Connections
DES-1026G
The DES-1026G switch provides 24 auto-sensing
10/100Mbps ports and 2 10/100/1000Mbps copper
Gigabit ports in a rack-mount box. The switch allows
mix and match of Ethernet, Fast Ethernet and Gigabit
in full- and half-duplex modes.
24-port 10/100Mbps Switch With 2 Built-in Copper
Gigabit Connections
The DES-1026G is an unmanaged 10/100Mbps switch designed to enhance workgroup performance while providing a high level
of flexibility. It provides 24 10/100Mbps ports for workstation connection, plus 2 copper Gigabit ports for server deployment,
allowing a workgroup to multiply bandwidths, boost response time and satisfy heavy load demands.
24 10/100Mbps Ports for Workstation Connection
The switch comes with 24 10/100Mbps ports, allowing a
small workgroup to flexibly integrate to Ethernet and Fast
Ethernet. These intelligent ports detect the network speed and
auto-negotiate between 100BASE-TX and 10BASE-T, as well
as between full and half-duplex.
2 Copper Gigabit Ports for Server Connection
2 copper Gigabit ports provide an inexpensive alternative
solution to fiber-optic. Using your existing low-cost Cat. 5
copper twisted-pair wires as the transmission media, these
ports allow you to instantly upgrade your servers to Gigabit
capability without requiring you to install new, expensive
fiber cables. Both ports support 10/100/1000Mbps network
speed auto-sensing and full/half duplex auto-negotiation.
Flow Control for Secure Transmission
All ports support flow control. This function minimizes
dropped packets by sending out collision signals when the
port's receiving buffer is full.
Auto-negotiation of MDI/MDIX Cross Over
All ports support auto-negotiation of MDI/MDIX cross
over. This eliminates the need for cross over cables or
uplink ports. Any port can simply plug to a workstation, a
server, a hub or a switch, using the usual straight-through
twisted-pair cable.
Plug-and-Play
With 26 plug-and-play ports, the switch is a perfect choice
for workgroups to upgrade performance in a client/server
environment. The ports can be connected to workstations
and servers in full-duplex, or hubs in half-duplex.
Features
24 10/100Mbps Fast Ethernet ports
2 10/100/1000Mbps copper Gigabit ports
Auto MDI/MDIX for each port
Full/half-duplex support for each port
Flow control for protection against data loss for each port
Auto-learning of network configuration
Secure store-and-forward switching scheme
Per-port auto-correction of reverse twisted-pair polarity
Standard 19-inch rack-mount size
Non-Blocking and wire speed
DES-1026G
Technical Specifications
General
Standards
- IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
- IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
- IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper)
- ANSI/IEEE 802.3 NWay auto-negotiation
- IEEE 802.3x Flow Control
Protocol
CSMA/CD
Data Transfer Rates
- Ethernet:
10Mbps (half-duplex)
20Mbps (full-duplex)
- Fast Ethernet:
100Mbps (half-duplex)
200Mbps (full-duplex)
- Gigabit Ethernet:
2000Mbps (full duplex)
Topology
Star
Network Cables
- 10BASE-T:
UTP Cat. 3, 4, 5 (100 m max.)
EIA/TIA-586 100-ohm STP (100 m max.)
- 100BASE-TX, 1000BASE-T:
UTP Cat. 5, Cat. 5e (100 m max.)
EIA/TIA-568 100-ohm STP (100 m max.)
Number of Ports
- 10/100Mbps port x 24
- 10/100/1000Mbps port x 2
10/100Mbps Unmanaged Switch With Gigabit Connections
Physical & Environmental
Power Supply
100 - 240 VAC
Internal universal power supply
Power Consumption
9.8 watts
MTBF
409,781 hours
Ventilation
No fan
Operating Temperature
o o o o
0 -40 C (32 -104 F)
Storage Temperature
o o o o
-10 -70 C (12 -158 F)
Humidity
5% - 95% RH non-condensing
Dimensions
440 (W) x 140 (D) x 44 (H) mm (17.32 x 5.51 x 1.73 inches)
19-inch rack-mount width, 1 U height
Weight
2.8 kg (6.17 lb.)
Emission (EMI)
- FCC Class A
- CE Class A
- VCCI Class A
- C-Tick
Media Interface Exchange
Auto MDI/MDI-X for each port
Twisted-pair Rx Reverse Polarity
Auto-correction for each port
Status/Diagnostic LEDs
Per device:
- Power
Per port:
- Link/Activity
- 100Mbps speed (10/100Mbps ports)
- 100Mbps, 1000Mbps speeds (10/100/1000Mbps ports)
Performance
Transmission Method
Store-and-forward
Switch Fabric
- Non-blocking
- 8.8Gbps
Filtering Address Table
8K entries per device
MAC Address Learning
Automatic update
Packet Filtering 1 Forwarding Rates
- 10BASE-T: 14,880 pps per port (half-duplex)
- 100BASE-TX: 148,810 pps per port (half-duplex)
- Gigabit Ethernet: 1,488,100 pps per port
Safety
- cUL
Ordering Information
Ethernet/Fast Ethernet Switch with Gigabit connections
DES-1026G 24 10/100Mbps ports
2 10/100/1000Mbps ports
RAM Buffer
320KBytes per device
D-Link is a registered trademark of D-Link Corporation/D-Link System Inc. All other trademarks belong to their proprietors.
Specifications subject to change without prior notice.
Rev. 03 (Dec. 2007)