DirtDevil Swivel Glide Vision User guide

OWNER’S MANUAL
Operating and Servicing
Instructions
©1998 All rights reserved #1-113017-000
11/01
Please read these
instructions carefully before using your Swivel Glide®Vision®.
Let us help you put your
cleaner together or answer any questions, call:
1-800-321-1134 (USA & Canada) website: www.dirtdevil.com
Español - página E1
For quick reference, please record your vacuum information below.
Model #: Mfg. Code:
(Mfg. code located on the lower backside of cleaner)
CONGRATULATIONS
You are now the proud owner of the Dirt Devil®Swivel Glide®Vision®, with Power You Can See™! You’ll never buy another bag again with the unique bagless design that includes a see-through dirt container for retrieving lost items. You’ll also enjoy superior cleaning performance with 12 amps of Maximum Vacuum Power.
Allergen sufferers will benefit with the exclusive PERMAFILTER
®
with CleanStream™Filtration located inside the dirt cup and HEPA exhaust filter that prevent over 99% of dust and allergens from escaping the vacuum and re-entering the room. Other features are included that make vacuuming easier such as the Swivel Casters
for easy maneuvering, and tools-on-board for
above floor cleaning. We are very proud of our products and hope that you are equally satisfied with their quality and
performance. Thank you for your support of Dirt Devil®products.
Visit our website at www.dirtdevil.com
TABLE OF CONTENTS
Feature Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 4
How To Assemble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 4
How To Operate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 5
Hose Assembly and Tool Storage . . . . . . . . . . . . . . . . . . . . .Page 5
Floor/Carpet Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 5
Above Floor Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 5
Hands Free Edge Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . .Page 5
Carpet Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 6
How To Transport Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 6
Dirt Container & PERMA FILTER
®
with CleanStream™Filtration
Removal and Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 6
Filter Removal and Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 7
Belt or Brushroll Removal and Replacement . . . . . . . . . . . . . . . . . .Page 7
Lightbulb Removal and Replacement . . . . . . . . . . . . . . . . . . . . . . . .Page 8
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 8
2
LIMITED WARRANTY
To the consumer, Royal Appliance Mfg. Co. warrants this vacuum cleaner to be free of defects in material or workmanship commencing upon the date of the original purchase. Refer to your vacuum cleaner carton for the length of warranty and save your original sales receipt to validate start of warranty period.
If the vacuum cleaner should become defective within the warranty period, we will repair or replace any defective parts free of charge. The complete machine must be delivered prepaid to any ROYAL®Authorized Sales & Warranty Service Station. Please include complete description of the problem, day of purchase, copy of original sales receipt and your name, address and telephone number. If you are not near a Warranty Station, call the factory for assistance at USA & Canada: 1-800-321-1134. Use only genuine Royal®replacement parts.
The warranty does not include unusual wear, damage resulting from accident or unreasonable use of the vacuum cleaner. This warranty does not cover belts, filters, brushes, bags, bulbs or fan damage. This warranty does not cover unauthorized repairs. This warranty gives you specific legal rights and you may also have other rights. (Other rights may vary from state to state in the USA).
WARNING: TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR INJURY:
WARNING:
To reduce the risk of electric shock, this appliance has a polarized plug (one blade wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, con­tact a qualified electrician to install the proper outlet. Do not change the plug in any way.
THIS CLEANER IS INTENDED FOR HOUSEHOLD USE ONLY
IMPORTANT SAFETY INSTRUCTIONS
When you use an appliance, basic precautions should be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
•ALWAYS FOLLOW THESE SAFETY INSTRUCTIONS.
BRING CLEANER TO UPRIGHT POSITION WHEN USING THE HOSE AND ATTACHMENTS.
DO NOT LEAVE CLEANER UNATTENDED WHEN PLUGGED IN.
REGULARLY CHECK THE FILTERS TO CLEAN OR REPLACE.
•WARNING: DO NOT USE SHARP OBJECTS TO CLEAN OUT THE HOSE SINCE THEY COULD CAUSE DAMAGE.
OCCASIONALLY REMOVE BRUSH AND CLEAN DEBRIS FROM END CAPS TO KEEP BRUSH ROTATING SMOOTHLY.
•WARNING: THE CORDS, WIRES AND/OR CABLES SUPPLIED WITH THIS PRODUCT CONTAINS CHEMICALS, INCLUDING LEAD OR LEAD COMPOUNDS, KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER USING.
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
• Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing.
• Do not use outdoors or on wet surfaces. Electrical shock could occur.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center for inspection. Call 1-800-321-1134 for the nearest service center.
• Do not pull or carry by cord, use cord as handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any objects into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without dirt container and filters in place.
•Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Keep the vacuum cleaner on the floor. Only the hand-held vacuum cleaners may be set on furniture.
• Cleaner must be in the upright position to lift the rotating brush off the carpet when doing above floor cleaning.
• Do not use an extension cord with this vacuum cleaner.
• Store the vacuum cleaner indoors. Put the vacuum cleaner away after use to prevent tripping accidents.
• Using improper voltage may result in damage to the motor and possible injury to the user. Proper voltage is listed on the
cleaner plate.
SAVE THESE INSTRUCTIONS
3
This vacuum has been designed with a patented Performance Indicator Wheel (located on the handle). This indicator, along with a clog valve, prevents the motor from overheating if a clog occurs. If activated, the wheel will spin rapidly and you’ll notice a decrease in the power or suction of the vacuum. If this happens, unplug the cleaner, empty the dirt con­tainer and deep clean the PERMA FILTER
®
with CleanStream™Filtration (see page 6 in the instruction manual). Also inspectthe nozzle/dirt passage, clear hose inlet for blockages and check the Hepa filter (replace if necessary - page 7). To maintain the performance of your vacuum, it is recommended that you empty the dirt container before the dirt reaches the “Max Fill” line and regularly clean the PERMA FILTER
®
with CleanStream™Filtration (located in the dirt container).
Diagram 1
Place upper handle onto upright.
Diagram 2
Align upper handle, pushing into place.
Diagram 3
Back of upright: secure handle with 2 supplied screws.
4
1
3
4
6
8
10
5a.
5a.
9
14
15
17
18
21
24
20
22
Fig. 1
Fig. 2
7
19
16
12
HOW TO ASSEMBLE
HOW TO ASSEMBLE TOOL REQUIRED: PHILLIPS SCREWDRIVER
1. Stand unit in upright position and place upper handle onto upright (Diagram 1).
2. Push upper handle onto upright, aligning upper handle with handle opening (Diagram 2).
3. TWO screws (supplied) enter from top of upright to secure handle (Diagram 3).
2 screws enter from
top of upright
Fig 1
1. Handle
2. Dirt Container Release Lever
3. HEPA Filter
4. Headlight 5a.*Power Edger
slots w/Wrap Around Bumper (Optional)
5b.*Scuff Guard™Bumper (Optional)
6. Carpet Height Adjust Knob
7. Handle Release Pedal
8. Dirt Container
9. PERMA FILTER
®
with CleanStream™Filtration in
Dirt Container
10. Co r d C l i p 11 . S t r e tch Hose
12. Hose Anchor
Fig. 2
13. Carrying Handle
14. Stretch Hose Handle
15. Long Power Cord
16. *Power Edger (optional w/Wrap Around Bumper)
17. Belt Storage
18. Swivel Casters
19. Extension Wand
20. Crevice Tool
21. 2-in-1 Tool - Dust brush/Upholstery tool
22. On/Off Switch - Just above HEPA Filter
23. Clear Hose Inlet
24. Edge Wedge
®
Tool(Corner and stair tool)
NOTE: *Optional tools not included with all
models
23
1.
2.
3.
2
11
5b.
FEATURES
13
18
Diagram 1
Attach flexible hose to cleaner.
Diagram 2
Insert hose handle into side of cleaner. Press down firmly.
Diagram 3 Attach Tools
A.Edge Wedge®B. Power Edger™C. 2-in­1 tool D. Telescopic Wand E. Crevice Tool.
Diagram 4
A. Cord hooks (Top hook: Quick Cord Clip).
HOW TO OPERATE 1. Plug cord into electrical outlet. 2. Turn cleaner “on”. Switch located on left side of cleaner directly above
HEPAfilter (Diagram 1). FLOOR/CARPET CLEANING
1. Handle should be in the upright position before adjusting the carpet setting (Diagram 2). Turn height adjustment knob to match the surface being cleaned (Diagram 3). Once height is selected the nozzle will go to the correct position.
NOTE: Rotating brush could cause area rug fringe to become tangled within cleaner. Use caution when vacuuming throw rugs with fringe. ABOVE FLOOR CLEANING
Cleaner must be in the upright position to lift the rotating brush off the carpet when cleaning above the floor.
1. Put cleaner in its upright position.
2. Remove the hose from the side of the cleaner using the handle (Diagram 4).
CAUTION: Brush agitator continues to rotate while hose is removed or in use and at all times while cleaner is on. Keep hair, loose clothing, fingers, and all parts of body away from brush area while cleaner is on.
3. Choose any of the handy accessories or use the hose alone. Simply push the attachment firmly onto the end of the wand or hose handle. To remove tool, twist and pull apart gently.
*FOR HANDS FREE EDGE CLEANING: Remove Power Edger
from upper back panel. Insert Power Edger™into desired power edger
slot. Remove hose end from side of unit and hose caddy. Slide hose end onto Power Edger
. Glide the upright against walls and base-
boards for superior edge cleaning (Diagram 5).
*Not available on all models
HOW TO OPERATE
5
B
D
A
C
E
match arrows
with tabs on
clear hose inlet
A
1A
1.
2.
3.
4.
5.
1.
2.
3.
4.
HOSE ASSEMBLY AND TOOL STORAGE
1. ATT ACH HOSE: Attach the flexible hose to the cleaner (Diagram 1). Match the arrows on the hose to the tabs on the clear hose inlet
(Diagram 1A). Push down firmly on the cuff and turn clockwise. Insert the hose handle into the side of the cleaner. Press down firmly to secure (Diagram 2).
2. ATTACH TOOLS: (Diagram 3) (A) Slide Edge Wedge
®
onto the base of upper handle with bristles facing in. (B) Push Power Edger
(Optional) onto upper back panel with bristles facing out. (C) Slide 2-in-1 tool onto upper back panel with bristles facing out. (D) Slide the Telescopic wand, small end down, onto the lower back panel. (E) Slip crevice tool onto lower back panel.
3. CORD STORAGE: For tidy cord storage, wrap cord around hooks on side of cleaner with quick cord release (Diagram 4) (A).
Height
adjustment
knob.
Diagram 1
On/Off switch.
Diagram 2
Handle release pedal.
Diagram 3
Height adjustment knob.
Diagram 4
Lift and remove hose at an angle for above the floor cleaning.
Diagram 5
Power Edger
Cleaning.
Diagram 4
Height adjust knob.
Diagram 5
Use carrying handle on back of cleaner to move room to room.
Diagram 1 Attached hose anchor to base. Stretch hose
assembled to anchor.
Diagram 3 Extension Wand
Remove wand from side of cleaner.
6
HOW TO OPERATE cont.
STRETCH HOSE AND HOSE ANCHOR: The Hose Anchor is used to prevent the vacuum from tipping while using the above
floor cleaning attachments. Remove the Stretch Hose from side of the cleaner using the handle. Lay hose over the back of cleaner (Diagram
1) and secure hose anchor ring, (Diagram 2a) located around hose to base. Pull hose from hose handle for additional length (Diagram 2b).
EXTENSION WAND:Remove wand from side of cleaner by pulling out at the top to unsnap and pull up (Diagram 3).
CARPET SETTINGS
IMPORTANT: PUT HANDLE IN THE UPRIGHT POSITION BEFORE ADJUSTING THE CARPET SETTING. Turn knob to adjust height of nozzle to match the surface being cleaned (Diagram 4). If cleaner is difficult to push, adjust to a higher carpet setting.
HOW TO TRANSPORT CLEANER
Use the carrying handle on the back of the cleaner to move cleaner from room to room (Diagram 5). NOTE: Do not push cleaner forward while leaning on back casters. Do not pull cleaner on back casters.
1.
2.
3.
3.
4.
5.
Height adjust
knob
2b.
1.
DIRT CONTAINER & PERMA FILTER®WITH CLEANSTREAM™FILTRATION: REMOVAL & REPLACEMENT
CLEANING DIRT CONTAINER & PERMA FILTER®WITH CLEANSTREAM™FILTRATION:For addition-
al filtration, a removable filter is located inside the dirt container. The filter does not need to be replaced but should be cleaned reglarly for maximum performance.
WARNING:
TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE SERVICING.
Empty & Clean DIRT CONTAINER:
1. Depress latch to remove dirt container from cleaner (Diagram 1). Pull dirt container out to empty (Diagram 2).
2. Remove and clean the PERMAFILTER
®
withCleanStream™Filtration (see instructions below).
3. Use a sponge and lukewarm water to wipe dirt container compartment clean.
4. Replace Dir t Container: Set aligning tab on bottom of dirt container into rectangular slot on the cleaner, and push to snap into place (Diagram 3). If dirt container does not snap into place, check to make sure the filter is secured properly.
CLEAN THE PERMA FILTER
®
WITH CLEANSTREAM™FILTRATION (internal) located in dirt container:
1. Remove dirt container. Hold dirt container, grasp inside ring at top of filter and firmly pull the filter up and out (Pg. 8 - Diagram 4).
2. Regular Maintenance*: Each time the dirt container is emptied, the filter should be cleaned. Gently tap the filter firmly against the inside of a trash can until dirt stops falling from the filter. (Filter will be discolored after use, this will not affect the filter’s performance.) Do not brush the filter.
3. Deep Cleaning*: If the Performance Indicator Wheel on the front of the handle is spinning rapidly you should notice a decrease in the vac- uum’s power or suction. If this happens, inspect the cleaner for clogs, empty the dirt cup and remove all dust and debris from the filter. Once cleaned the vacuum will immediately be ready for use.
4. Replace the PERMA FILTER®withCleanStream™Filtration: Align angle of filter with angle of dirt container (gasket facing up). Push down on filter to snap into place and prevent dirt leakage. Return dirt cup to cleaner.
* The cleaning instructions may vary depending on the dirt conditions. In some cases, more or less cleaning of the PERMA FILTER
®
with
CleanStream
Filtration may be required.
2a.
Diagram 2a Hose Anchor Diagram 2b Hide-a-Hose
®
Pull hose from hose handle.
Diagram 2 Empty dirt container
Filter does not have to be removed to empty dirt container.
Diagram 3 Replace dirt container
The filter must be in dirt container before replacing dirt container.
Diagram 1 Release dirt container
Depress latch to remove dirt container.
BELT OR BRUSH REMOVAL& REPLACEMENT
TOOL REQUIRED: PHILLIPS SCREWDRIVER WARNING:
TO REDUCE THE RISK OF INJURYFROM MOVING P AR TS - UNPLUG CLEANER BEFORE CHANGING BELT OR BRUSHROLL.
TO REMOVE BELT Flip cleaner to expose nozzle base. Base should lay flat and face up. To remove nozzle cover, use Phillips
screwdriver to remove the four screws. Arrows (Diagram 1) show location of screws. Flip cleaner back over and lift nozzle cover off. Slide belt off motor shaft (Diagram 2). Lift and remove brushroll (Diagram 3). Dispose of old belt.
TO REPLACE BELT
1. Place belt on motor shaft, then slip brushroll through belt. Place belt in area of brushroll without bristles (Diagram 4).
2. With belt in place, pull and slide brushroll into nozzle (Diagram 3) making sure that the brushroll end caps are in the correct orienta­tion (Diagram 3a inset). IMPORTANT: ROTATE BRUSHROLL MANUALLY TO MAKE SURE BELT IS NOT TWISTED.
3. Reattach nozzle cover. Secure by replacing the screws under the nozzle base.
BELT STORAGE
Stretch belt around hooks on back panel of upright (See page 4, Figure 2 for belt storage location).
FILTER REMOVAL & REPLACEMENT
7
FILTER REMOVAL & REPLACEMENT Unplug cleaner before changing filter.
This upright contains two filters: HEPAfilter (side of cleaner) and PERMA FILTER®with CleanStream™Filtration (in dirt container) which combined pre­vent dust and allergens from escaping the vacuum and re-entering the air.
HEPA FILTER (external) - Part# 3-690320-001 located on side of cleaner.
The HEPA Filter should be replaced annually. Write date of filter replacement on label.
1. Grasp tab located at the top of the HEPAfilter cover and pull away from the cleaner (Diagram 1).
2. Grasp HEPAfilter Cartridge and pull out (Diagram 2). IMPORTA N T: Do NOT clean with water.
3. For HEPAfilter replacements call 1-800-321-1134 (USA & Canada).
4. To Replace: Lay HEPA filter in cover with gasket facing up. Close the cover by pushing it firmly until it snaps into place (Diagram 3).
NOTE: If filter cover is knocked off, replace by aligning the bottom tabs and snapping into place.
PERMA FILTER®WITHCLEANSTREAM™FILTRATION (internal) - located in dirt container.The filter should
not need to be replaced but should be cleaned every time the dirt container is emptied to maximize perfor­mance of the vacuum (see page 6: Cleaning the PERMA FILTER®withCleanStream™Filtration).
BELT STYLE:
4&5
3a
Diagram 1 HEPA
Grasp HEPAcover tab and pull away from cleaner.
Diagram 3 HEPA
Place new filter with gasket fac­ing up and close.
Diagram 4 PERMA FILTER
®
Grasp inside ring at top of filter and firmly pull filter up and out.
Diagram 2 HEPA
Grasp HEPAfilter and pull out.
BELT OR BRUSH REMOVAL & REPLACEMENT
Diagram 1 Remove Nozzle Cover
Use Phillips screwdriver to remove 4 screws.
Diagram 3 Brushroll
Lift and remove brushroll.
Diagram 4 Replace Belt
Place belt in area of brushroll without bristles.
Diagram 2 Remove belt
Slide belt off motor shaft.
END CAP
1.
2.
3.
4.
1.
2.
3.
4.
TROUBLE SHOOTING GUIDE
LIGHTBULB REMOVAL & REPLACEMENT
8
WARNING: TO REDUCE RISK OF PERSONAL INJURY - UNPLUG CLEANER BEFORE SERVICING
Problem Possible Reasons Possible Solutions
Cleaner won’t run 1. Power cord not firmly plugged into outlet. 1. Plug unit in firmly.
2. Blown fuse or tripped breaker. 2. Check fuse or breaker in home. Replace fuse/reset breaker.
3. Needs service. 3. Take to service center or call 1-800-321-1134.
Cleaner won’t pick-up 1. Dirt container not installed correctly. 1. Review dirt container Removal and Replacement-Pg. 6. or low suction. 2. Dirt container full. 2. Empty dirt container-Pg. 6.
3. Clogged filter. 3. Remove filter and clean-Pg. 7.
4. Nozzle/dirt passage clogged. 4. Remove base nozzle cover; remove obstruction OR Remove hose; remove obstruction.
5. Clear hose inlet clogged. 5. Remove hose and clean inlet.
6. Brushroll worn. 6. Replace brushroll-Pg. 7.
7. Broken or worn belt. 7. Replace belt-Pg. 7.
8. Carpet height setting is incorrect. 8. Set carpet height adjustment to appropriate setting for carpet being cleaned-Pg. 6.
9. Clog valve activated. 9. Clean filters and clear blockages-Pg. 6.
Dust escaping from cleaner 1. Dirt container full. 1. Empty dirt container-Pg. 6.
2. Dirt container not installed correctly. 2. Review dirt container Removal and Replacement-Pg. 6.
3. Hose not installed correctly. 3. Review Hose Installation-Pg. 5.
Cleaner tools won’t pick up. 1. Hose clogged. 1. Remove hose and tools; remove obstruction-Pg. 5.
2. Hose inlet clogged. 2. Remove hose and clean inlet.
3. Dirt container full. 3. Empty dirt container-Pg. 6.
4. Filter clogged. 4. Clean filter-Pg. 7.
Headlight not working1.Bulb burnt out. 1. Replace bulb-Pg. 8.
2. Loose electrical wires. 2. Call 1-800-321-1134 for nearest authorized Royal
®
Dealer.
Cleaner is difficult to push 1.Carpet height setting is incorrect. 1. Set carpet height adjustment to appropriate
setting for carpet being cleaned-Pg. 6.
ANY OTHER SERVICING SHOULD BE DONE BY A N AUTHORIZED SERVICE REPRESENTATIVE
CUSTOMER SERVICE (1-800-321-1134)
In the event that further assistance is required, see your Yellow Pages for an authorized Royal®Dealer. Costs of any transportation to and from any place of repair are to be paid by the owner. The service parts used in this unit are easily replaced and readily available from an authorized Royal®Dealer or retailer. Always identify your cleaner by the model number and manufacturing code when request­ing information or ordering replacement parts. (The model number appears on the back of the cleaner.)
Diagram 1 Pop Headlight Lens
Insert flat head screwdriver into side slot and pry outward.
Diagram 2 Remove/Replace Bulb
Pull bulb out of socket to remove. Push bulb into socket to replace.
LIGHTBULB REMOVA L & REPLACEMENT
TOOL REQUIRED: FLATHEAD SCREWDRIVER WARNING:TO REDUCE THE RISK OF ELECTRIC SHOCK - UNPLUG CLEANER BEFORE REMOVING OR REPLACING LIGHTBULB.
This cleaner uses a common automotive lamp #906, 13.0 volts. For bulb replacement call 1-800-321-1134 or your local auto parts store.
1. Lean cleaner handle back. Insert end of standard (flat head) screwdriver into side slot and pry outward to pop headlight lens out (Diagram 1).
2. Pull bulb out of socket to remove. Push bulb into socket to replace (Diagram 2).
3. Snap headlight lens panel back into place.
1.
2.
Loading...