DENVER SCQ-50001G User Manual

SCQ-50001G

User Manual

DENVER SCQ-50001G
Dear customer, congratulations on your new smartphone. We suggest you have a look at this quick start guide to get
started with the phone. Most of the functions on the phone are explained directly on screen, so you can easily get
started using it just by reading the instructions there.

POWER KEY (on the side)

To turn on the phone, press and hold the power key until the screen lights up.
Pressing this key will wake up the phone from standby mode and set it in standby
mode if it is active.

VOLUME KEYS (on the side)

Press these keys to increase or decrease the volume.

MENU KEY (on the front)

Shows the options of the current menu.

HOME KEY (on the front)

Press this key in any mode to return to the home screen.

RETURN KEY (on the front)

Press this key to return to the previous menu or function.

Inserting SIM card & memory card

Turn off the phone, remove the battery and then insert the SIM card into the SIM holder as shown inside the phone.
Reassemble the phone and press and hold the power key to turn it on. You will typically be asked to insert a PIN
code; this is the code you receive from your network provider for the SIM card. Please follow the on screen
instructions.

Settings

The settings menu of the smartphone is where you adjust all settings such as language, Wi-Fi, Bluetooth, different
type of keyboards. We recommend you look through the settings menu and in this way learn how to easily change
the settings.

Wi-Fi settings

We recommend using Wi-Fi when possible to avoid data costs on your subscription. Enter the settings menu on the
smartphone, go to Wi-Fi settings and turn the function on. Find your Wi-Fi network on the list and tap on it. Enter
your password and connect. Now it will connect to this Wi-Fi network every time you are near it and in this way save
your data cost on the SIM card. Also, Wi-Fi will often be a lot faster.

Bluetooth

If you have a Bluetooth headset or speaker, you can use it with the smartphone. This is also controlled via the
settings menu. Just go to the Bluetooth settings and turn the function on. Then find the equipment on the list and
connect - you are ready to use it (some Bluetooth headsets and speakers need a password, but this will be explained
in the respective user manual).

GPS function

Your smartphone has an integrated hardware GPS function. This can be used for navigation and to give you proper
results when using for instance Google search. To enable the function, go to Settings and to the Locations menu, and
make sure that the location services are set to both hardware and software. Now you can use your smartphone for
navigation or to run and use various fitness apps.

Camera

Your smartphone has two cameras. One on the back and one on the front. The rear camera is used for shooting
photos and videos, while the front camera is great for video chat and funny photo/messaging apps.

Notification menu