Denver DPF-592, DPF-591 User Manual
CONTENTS
Important Safeguards …………………………………………..…......... ……… 1
Frequently Asked Questions ………………………………………………………4
Control Buttons ………………………………………………….…………… 5
Control Functions ……………………………………………….... …………… 5
Glossary of Terms………………………………………........... .... ………………… 8
Technical Specifications……………………………..………............... ………… 9
Important Safeguards
IMPORTANT SAFEGUARDS
DANGER- Indicates an imminently hazardous situation, which, if not avoided, will result in
death or serious injury. Usage of this signal word is limited to the most extreme situations.
WARNING- Indicates a potentially hazardous situation, which, if not avoided, could result in
death or serious injury.
CAUTION-indicates a potentially hazardous situation, which if not avoided, may result in
minor/moderate injury or product/property damage. it also alerts against unsafe practices.
WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or
moisture.
WARNING: To prevent the risk of electric shock, do not remove cover. No user-serviceable parts
inside. Refer servicing to qualified personnel.
READ ALL INSTRUCTIONS BEFORE USE.
WARNING—To reduce the risk of fire, electric shock, or serious personal injury:
z
HEED WARNINGS. Adhere to all warnings in the operating instructions and on the Digital
photo frame itself.
WATER AND MOISTURE. Do not use the unit water or expose to rain or moisture.
z
ATTACHMENTS. Use only manufacturer-re commended attachments or accessories.
z
ACCESSORIES. Do not place the Digita l Photo Frame on an unstable ca rt, stand, tripod,
z
bracket, or table. The unit may fall, causing injury to you and serious damage to the product.
VENTILATION. Positi on the Digital Photo Frame so th at its location does no t in terfere with
z
its proper ventilation. For example, the unit should not be situated on a bed, sofa, tug or similar
surface that may block the ventilation opening, or placed in a built-in installation, such as a bookcase or cabinet, that may im pede the flow of air through the ventilation ope nings.
HEAT. Position the digital Photo Frame away from sources of high heat such as radiators or
z
stoves.
POWER CORD PROTECTION. Don’t w alked on the power cord, and pay particul ar attentio n
z
to the point where the cord attaches to the Digital Photo Frame.
NON-USE. Unplug the power cord from the outlet when the unit is not in use.
z
AVOIDING SURGES. For added protection during lightning storm, unplug the Digital Photo
z
Frame from the wall outlet to prevent damage to the product due to power line surges.
OVERLOADING. Do not overload wall outlets or extension cords.
z
OBJECT AND LIQUID ENTRY. Do not place objects onto or spill liquids on or inside the
z
Digital Photo Frame.
DAMAGE REQUIRING SERVICE. Seek service by qualified service personnel when:
z
--The power supply has been damaged.
--Liquid has been spilled onto the Digital Photo Frame.
--The unit has been exposed to rain.
--The unit does not operate normally, or exhibits a marked change in performance.
Signal Word Definitions
--The unit has been dropped or physically damaged
SERVICING. Do not attempt to service the Digital Photo Frame beyond those means
z
described in these operatin g inst ructions. All other servicing should be referred to qualified service
personnel.
CAUTION—To reduce the risk of personal injury or product/property damage:
CLEANING. Clean the outer surface of the Digital Pho to Frame (excluding the scree n)gently
z
using a soft cloth dampened with water. Clean the screen only with a specified cleaning solution for
use with products such as laptops and comp uter monitors. These are available at most retail
consumer electronics stores. Do not clean the inside of the unit
Condensation
If cold water is poured into a glass, water droplets form on the outside of the glass. This is called
condensation. Condensation may occur on internal operating parts of the product. Condensation
occurs:
When the product is brought from the outdoors into a warm room, or if it is in a cold room
z
which is heated quickly.
If the unit is mo ve d occur, the product may not oper ate properly if condensati on occu r s. Wait1-
z
2 hours (to allow the internal parts to adju st to the surrounding temperature) before using the
product.
SAVETHESEINSTRUCTIONSFORFUTUREREFERENCE
Frequently asked questions
Q: How to set my Digital Photo Frame?
A: The Digital photo Frame setup is very easy after following up the Users’ Manual Direction. just
plug the power adapter into the power jack( back side of the Digital Photo Frame) and plug the power
cord into a standard 100-240 volt AC electrical outlet. Next, insert a memory card into the card slot
and slide the power Switch to ON.
.Q: What kind of memory card does the Digital Photo Frame read?
A: The Digital photo Frame can r ead all the popular memory cards including th e large capacity of
32MB-4GB and above, which included MMC/SD/MS card.
Q: What kind of media format does the Digital Photo Frame support?
A: The Digital Photo Frame can support JP EG p icture format
Q: The adaptor of the Digital Photo Frame already be connected, why it is still no display?
A: The Adapter doesn’t be connected to the Phot o Frame or the Power Switch is not in the ON
Loading...