100 Corporate Drive Mahwah, NJ 07430
Service Bulletin
No. : OST-F1018
Date: June 20, 2007
_____________________________________________________________
Model: DVD-5910
Subject: Countermeasure for a malfunction on the Analog 2-channel Output-
terminal.
Symptom: No sound output from the Analog 2-channel output terminal. (The
5.1-channel outputs the sound signal properly.)
Solution:
IC502 so that it is pulled up to +3.3V which allows the Boot operation to start
properly.
MODIFICATION: (Upon claim and/or refurbishment of the unit) Apply the
following modification to the subject models upon customer claim and/or
refurbishment of the unit.
• The P. W. Board to which the modification is applied: SYSTEM UNIT
Add a 10k-ohm resistor (P/N 00D 241 2400 995) to Pin #146 of
• Modification parts:
______________________________________________________________________________________
CONFIDENTIALITY NOTICE:
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss
resulting from the misuse of the information contained in this document.
Modification Procedure:
Connect the 10kΩ resistor between the Pin #146 (nSTATUS) of the IC502
(EP1C12Q240C8) and the 3.3V_D1-1.
______________________________________________________________________________________
CONFIDENTIALITY NOTICE:
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss
resulting from the misuse of the information contained in this document.