Monday – Friday 10:00AM to 10:00PM E.S.T
Saturday 12:00PM to 8:00PM E.S.T
English
Français
EsPaÑOl
WelcomeBefore You Begin
Thank you for choosing a Denon AV
receiver. This guide provides step-bystep instructions for setting up your AV
receiver.
Required for Setup
TVSpeaker cables
HDMI cableSubwoofer cableSpeaker systems
Optional
or
LAN cableWi-Fi router
•When connecting this unit to a device that is compatible with the Deep Color, 4K and ARC
functions, use a “High Speed HDMI cable with Ethernet” that displays the HDMI logo.
• These drawings are for illustrative purposes only and may not represent the actual product(s).
1
What’s In the Box
Quick Start Guide
Safety InstructionsAM loop antenna
Notes on radioSound calibration
Warranty
(for North America
model only)
Cable labelsRemote control unit
ReceiverR03/AAA batteries
Power cord
The supplied Sound calibration microphone stand is convenient for use when
performing Speaker Calibration. Using your own tripod or the supplied Sound
calibration microphone stand enables settings to be automatically configured to
the optimum listening environment, providing exceptionally high performance.
FM indoor antenna
microphone
Sound calibration
microphone stand
2
Setup
There are three steps to the setup
process.
Installing batteries in the remote control unit
1
Connecting the receiver
2
Following the On-Screen Setup Assistant
3
Installing batteries in the
1
remote control unit
R03/AAA batteries
3
2
Connecting the receiver
2.1) Place the receiver near your TV and
connect the power cord.
TV
Receiver
Power cord
(supplied)
Connect to household
power outlet
(AC 120 V, 60 Hz)
4
2.2) Connect to the network.
Wired LAN
When connecting cables (wired connection), connect a LAN
cable between your receiver and your network router.
Internet
Router
Modem
To WAN side
To LAN port
AC IN
Wireless LAN
When using a wireless connection (Wi-Fi), rotate the antennas
upward.
Internet
Router with
access point
Modem
To WAN side
AC IN
5
2.3) Connect the receiver to your TV
with an HDMI cable.
HDMI IN
(ARC)
2.4) Turn on the TV.
HDMI cable
HDMI OUT
MONITOR
(ARC)
AC IN
Receiver (Rear panel)
ARC (Audio Return Channel) :
If your TV supports ARC, your TV can send audio back to the AV receiver
when you are using your TV’s built-in video sources (TV tuner, Smart TV
streaming services, etc…) ARC requires that you enable HDMI CEC on
your TV. Please refer to your TV’s Owner’s Manual for instructions on how
to setup HDMI CEC. Note that some TV manufacturers use other names
for the HDMI CEC function.
TV remote control unit
2.5) Select the appropriate HDMI input
on your TV.
HDMI
INPUT
TV remote control unit
or
TV/
VIDEO
6
2.6) Turn on the receiver.
2.7) Verify the connection.
•Press X to turn on the receiver.
•Verify that you can see this screen on your TV.
AV Reciever Setup Assistant
Please select a language...
English
Español
Français
If this screen is not displayed, please go back and
retry the steps again in the recommended sequence.
7
3
Following the On-Screen Setup Assistant
The Setup Assistant will walk you through connecting and
confi guring your speakers and components to your Denon
receiver. Please use the remote control and follow the
on-screen instructions.
AV Reciever Setup Assistant
Please select a language...
English
Español
Français
8
Owner’s Manual
•For more information, visit www.denon.com
•Refer to the Online Manual for other functions
information and operation procedure details.
manuals.denon.com/AVRX2200W/NA/EN/