Delonghi XW 1270 User Manual

DRY/WET VACUUM CLEANER

Important

• Read these instructions carefully.

• Before use, check that the mains voltage corresponds to the
voltage indicated on the rating plate under the handle of the
appliance.

• Connect the appliance to an efficiently earthed socket with a
minimum current rating of 10 A only.
It is not necessary to earth double insulated appliances (see
symbol on rating plate).

• When not in use or before cleaning or maintenance,
always unplug the appliance from the mains socket.

• NEVER wash the appliance with triethylene or other
solvents.

• NEVER unplug the appliance by pulling the power cable or
the appliance itself.

• NEVER leave the appliance turned on when unattended.
Keep away from children and unfit persons.

• NEVER run the appliance over the power cable to avoid
damaging the cable insulation.

• NEVER vacuum up inflammable or corrosive liquids.

• NEVER vacuum up matches, ash or cigarette ends when still
lit.

• DO NOT use the appliance if it appears to be faulty.

• For all repairs and for replacement of the power cable if
damaged contact your dealer or an authorised service centre
to maintain the efficiency of your appliance and the validity of
the guarantee. For the same reasons, you are always
recommended to use original spare parts.

• Bear in mind that a considerable quantity of air is given off
from the air outlet grill during use. This could be unpleasant if
directed at people, particularly the face.

8

9

DESCRIPTION

1) Air outlet grill with microfilter

2) Handle

3) ON/OFF switch

4) Motor head

5) Suction outlet + suction hose coupling

6) Motor housing

7) Motor head clips

8) Drum

9) Tool trolley

10) Castors

11) Motor protection polyurethane filter

12) Dust bag holder accessory

13) Large dust bag (if provided)

14) Hose

15) Handgrip

16) Telescopic tube

17) Crevice tool

18) Multipurpose nozzle

19) Wet vacuum brush

20) Rubber frame

21) Carpet/floor brush

Assembly instructions

Release the cover by pulling the clips
outwards (fig.1).

Remove the accessories from the drum
(fig.2).

Turn the appliance upside down and fix the
castors in place by pushing them into the
holes in the bottom of the drum (fig. 3).

Make sure the polyurethane filter is in
place in the protective motor housing (fig.

4).

Attach the hose to the suction outlet (fig.

5). To remove, press the tabs and pull (fig.

6).

Fit one end of the telescopic tube to the
handgrip and the other to the most suitable
tool for the operation to be performed.

The hose handgrip incorporates a
mechanical suction regulator. Suction can
be adjusted rapidly and practically by
simply moving the slide (fig. 7).

Plug the appliance into the mains socket
and turn on by pressing the ON/OFF switch
on the cover.

Wet vacuuming

To tackle those minor household emer­gencies such as:

- blocked sinks or drains, small floods
(washing machine, dishwasher), acci­dental spills of liquid, refrigerator or
freezer defrosting, etc.

Remove the holder and dust bag and
make sure the polyurethane filter (11) is
in place on the motor housing (fig. 4).
Fit the most suitable cleaning tool for the
operation to be performed directly onto
the handgrip. You can use the crevice
tool, multipurpose nozzle or wet vacuum
brush.
Designed for wet vacuuming, the wet
vacuum brush has a detachable frame
with a rubber element to facilitate
vacuuming up of liquids. To replace the
detachable frame, press the two tabs on

the sides of the frame downwards.

ENGLISH