Dell T3610 User Manual

Dell Precision Workstation T3610 Owner's Manual

Regulatory Model: D01T Regulatory Type: D01T004

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Copyright © 2014 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws. mentioned herein may be trademarks of their respective companies.

2014 – 03

Rev. A01

™

and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks and names

Dell

Contents

1 Working on Your Computer....................................................................................................... 5

Before Working Inside Your Computer.....................................................................................................................5

Turning Off Your Computer....................................................................................................................................... 6

After Working Inside Your Computer........................................................................................................................6

2 Removing and Installing Components..................................................................................... 9

Recommended Tools................................................................................................................................................ 9

System Overview...................................................................................................................................................... 9

Removing the Power Supply Unit (PSU)................................................................................................................. 10

Installing the Power Supply Unit (PSU).................................................................................................................. 10

Removing the Cover................................................................................................................................................11

Installing the Cover.................................................................................................................................................12

Removing the PSU Card..........................................................................................................................................12

Installing the PSU Card...........................................................................................................................................14

Removing the Front Bezel....................................................................................................................................... 14

Installing the Front Bezel........................................................................................................................................ 15

Removing the Optical Drive ................................................................................................................................... 15

Installing the Optical Drive .....................................................................................................................................18

Removing the Hard Drive........................................................................................................................................18

Installing the Hard Drive ........................................................................................................................................ 19

Removing the Speaker............................................................................................................................................19

Installing the Speaker.............................................................................................................................................20

Installing the Thermal Sensor.................................................................................................................................20

Removing the Thermal Sensor................................................................................................................................21

Removing the Input/Output (I/O) Panel...................................................................................................................21

Installing the Input/Output (I/O) Panel.................................................................................................................... 23

Removing the Air Tunnel ........................................................................................................................................23

Installing the Air Tunnel .........................................................................................................................................23

Removing the Memory............................................................................................................................................24

Installing the Memory.............................................................................................................................................24

Removing the Coin-Cell Battery..............................................................................................................................24

Installing the Coin-Cell Battery...............................................................................................................................25

Removing the System Fan.......................................................................................................................................25

Installing the System Fan........................................................................................................................................30

Removing the Heatsink........................................................................................................................................... 30

Installing the Heatsink............................................................................................................................................ 30

Removing the Heatsink Fan.................................................................................................................................... 31

Installing the Heatsink Fan..................................................................................................................................... 31

Removing the Processor.........................................................................................................................................31

Installing the Processor..........................................................................................................................................32

Removing the System Board...................................................................................................................................33

Installing the System Board....................................................................................................................................34

System Board Components.................................................................................................................................... 35

3 Additional Information..............................................................................................................37

Memory Module Guidelines................................................................................................................................... 37

Power Supply Unit (PSU) Lock................................................................................................................................37

4 System Setup............................................................................................................................. 39

Boot Sequence....................................................................................................................................................... 39

Navigation Keys......................................................................................................................................................39

System Setup Options.............................................................................................................................................40

Updating the BIOS ................................................................................................................................................. 47

System and Setup Password..................................................................................................................................48

Assigning a System Password and Setup Password...................................................................................... 48

Deleting or Changing an Existing System and/or Setup Password..................................................................49

Disabling a System Password..........................................................................................................................49

5 Diagnostics.................................................................................................................................51

Enhanced Pre-Boot System Assessment (ePSA) Diagnostics...............................................................................51

6 Troubleshooting Your Computer.............................................................................................53

Diagnostic LEDs......................................................................................................................................................53

Error Messages...................................................................................................................................................... 55

Errors That Do Not Halt Your Computer........................................................................................................... 55

Errors That Soft Halt Your Computer................................................................................................................56

7 Technical Specifications......................................................................................................... 57

8 Contacting Dell.......................................................................................................................... 65

Working on Your Computer

Before Working Inside Your Computer

Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your personal safety. Unless otherwise noted, each procedure included in this document assumes that the following conditions exist:

• You have read the safety information that shipped with your computer.

• A component can be replaced or--if purchased separately--installed by performing the removal procedure in reverse order.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/ regulatory_compliance

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.

CAUTION: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a card by its edges or by its metal mounting bracket. Hold a component such as a processor by its edges, not by its pins.

CAUTION: When you disconnect a cable, pull on its connector or on its pull-tab, not on the cable itself. Some cables have connectors with locking tabs; if you are disconnecting this type of cable, press in on the locking tabs before you disconnect the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any connector pins. Also, before you connect a cable, ensure that both connectors are correctly oriented and aligned.

NOTE: The color of your computer and certain components may appear differently than shown in this document.

To avoid damaging your computer, perform the following steps before you begin working inside the computer.

1. Ensure that your work surface is flat and clean to prevent the computer cover from being scratched.

2. Turn off your computer (see Turning Off Your Computer).

CAUTION: To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from the network device.

3. Disconnect all network cables from the computer.

4. Disconnect your computer and all attached devices from their electrical outlets.

5. Press and hold the power button while the computer is unplugged to ground the system board.

6. Remove the cover.

CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to dissipate static electricity, which could harm internal components.

Turning Off Your Computer

CAUTION: To avoid losing data, save and close all open files and exit all open programs before you turn off your computer.

1. Shut down the operating system:

• In Windows 8:

– Using a touch-enabled device:

a. Swipe in from the right edge of the screen, opening the Charms menu and select Settings.

b. Select the and then select Shut down

– Using a mouse:

a. Point to upper-right corner of the screen and click Settings.

b. Click the and select Shut down.

• In Windows 7:

1. Click Start .

2. Click Shut Down.

1. Click Start .

2. Click the arrow in the lower-right corner of the Start menu as shown below, and then click Shut Down..

2. Ensure that the computer and all attached devices are turned off. If your computer and attached devices did not

automatically turn off when you shut down your operating system, press and hold the power button for about 6 seconds to turn them off.

After Working Inside Your Computer

After you complete any replacement procedure, ensure you connect any external devices, cards, and cables before turning on your computer.

1. Replace the cover.

CAUTION: To connect a network cable, first plug the cable into the network device and then plug it into the computer.

2. Connect any telephone or network cables to your computer.

3. Connect your computer and all attached devices to their electrical outlets.

4. Turn on your computer.

5. If required, verify that the computer works correctly by running the Dell Diagnostics.

Removing and Installing Components

This section provides detailed information on how to remove or install the components from your computer.

Recommended Tools

The procedures in this document may require the following tools:

• Small flat-blade screwdriver

• Phillips screwdriver

• Small plastic scribe

System Overview

Figure 1. Inside View of T3610 Computer

heatsink with integrated fan 2. air tunnels

3. front bezel 4. optical drive

5. air duct 6. hard drive

7. baffle cover 8. power supply unit (PSU)

9. PCI card 10. intrusion switch

Removing the Power Supply Unit (PSU)

1. Follow the procedures in

2. If the PSU is locked, remove the PSU lock screw to release the PSU. For more information, see PSU Lock Feature.

3. Hold the handle bar and press down on the blue latch to release the PSU.

4. Hold the handle bar to slide the PSU out of the computer.

Before Working Inside Your Computer

Installing the Power Supply Unit (PSU)

1. Hold the PSU handle and slide the PSU into the computer.

2. Follow the procedures in

After Working Inside Your Computer

Removing the Cover

1. Follow the procedures in

2. Lay down the computer on its side with the latch facing up.

3. Lift up the cover-release latch.

Before Working Inside Your Computer

4. Lift the cover upward to a 45–degree angle, and remove it from the computer.

Installing the Cover

1. Place the computer cover on the chassis.

2. Press down on the computer cover until it clicks into place.

3. Follow the procedures in

After Working Inside Your Computer

Removing the PSU Card

1. Follow the procedures in

2. Remove the cover.

3. Slide the baffle cover from its slot towards the front.

Before Working On Your Computer

4. Remove the baffle cover from the computer.

5. Disconnect the power cables from the system board.

6. Remove the screws securing the PSU card to the slot.

7. Remove the PSU card from the computer.

Installing the PSU Card

1. Replace the PSU card in its slot.

2. Tighten the screws to secure the PSU card in its slot.

3. Connect the power cables to the connectors on the system board.

4. Replace the baffle cover in its slot.

5. Install the cover.

6. Follow the procedures in

After Working Inside Your Computer

Removing the Front Bezel

1. Follow the procedures in

2. Remove the cover.

3. Gently pry the front bezel retention clips away from the chassis located at the edge of front bezel.

Before Working Inside Your Computer

4. Rotate and pull the bezel panel away from the computer to release the hooks on the opposite edge of the bezel from

the chassis.

Installing the Front Bezel

1. Insert the hooks along the bottom edge of the front panel into the slots on the chassis front.

2. Rotate the bezel towards the computer to engage the front-bezel retention clips until they click into place.

3. Install the cover.

4. Follow the procedures in

After Working Inside Your Computer

Removing the Optical Drive

1. Follow the procedures in

2. Remove the cover.

3. Disconnect the data and power cables from the optical drive.

Before Working Inside Your Computer

4. Unthread the cables from the latches.

5. Press on the clasp to release the latch holding the cables on the side of the optical-drive cage.

6. Press down on the latch and lift up the cables.

7. Lift up the release latch on top of the optical-drive cage.

8. Holding the release latch, slide the optical-drive cage from the optical-drive compartment.

Installing the Optical Drive

1. Lift the release latch, and slide the optical-drive cage inside the compartment.

2. Press on the clasp to release the latch and thread the cables into the holder.

3. Connect the power cable to the back of the optical drive.

4. Connect the data cable to the back of the optical drive.

5. Install the cover.

6. Follow the procedures in

After Working Inside Your Computer

Removing the Hard Drive

1. Follow the procedures in

2. Remove the cover.

3. Disconnect the power supply and data cables from the hard drive.

4. Press in on the latches on either side of the hard-drive bracket.

Before Working Inside Your Computer

5. Slide the hard drive out of the compartment.

6. If a 2.5–inch hard drive is installed, remove the screws and lift up the drive to remove it from the hard-drive caddy.

Installing the Hard Drive

1. If a 2.5–inch hard drive is installed on the computer, place the hard drive on the hard-drive caddy and tighten the

screws to secure the hard drive.

2. Press in on the latches of the hard-drive cage and slide it inside the compartment.

3. Connect the hard-drive power supply cable.

4. Connect the hard-drive data cable.

5. Install the cover.

6. Follow the procedures in

After Working Inside Your Computer

Removing the Speaker

1. Follow the procedures in

2. Remove the cover.

Before Working On Your Computer

3. Disconnect the speaker cable from the system board.

4. Press down the clasp, lift and remove the speaker.

Installing the Speaker

1. Replace the speaker and fix the clasp.

2. Connect the speaker cable to the system board.

3. Install the cover.

4. Follow the procedures in

After Working Inside Your Computer

Installing the Thermal Sensor

NOTE: The Thermal Sensor is an optional component and your computer may not ship with it.

1. Replace the thermal sensor in its slot and tighten the latch securing it to the computer.

2. Install the cover.

3. Follow the procedures in After Working Inside Your Computer.

+ 45 hidden pages