Dell T06G User Manual

Dell Venue Pro 11 – 5130 User’s Guide

Regulatory Model: T06G Regulatory Type: T06G001

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

intellectual property laws. Dell™ and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be trademarks of their respective companies.

2014 -12

Rev. A01

Contents

1 Working on Your Tablet.......................................................................................5

Before Working Inside Your Tablet.......................................................................................................5

Turning off Your Tablet.........................................................................................................................6

2 Setting Up Your Tablet.........................................................................................8

Charging the Tablet...............................................................................................................................8

Turning On Your Tablet........................................................................................................................ 9

Turning off the Screen........................................................................................................................ 10

Using power buttonUsing Charms............................................................................................... 10

3 Using Your Tablet................................................................................................11

Screen Orientation...............................................................................................................................11

How to lock / unlock the screen orientation......................................................................................11

Adjusting the screen brightness.................................................................................................... 11

Gestures............................................................................................................................................... 12

Right-Click..................................................................................................................................... 14

The Windows Start Screen..................................................................................................................14

How to access the Start screen.................................................................................................... 14

Get to know Windows 8.1............................................................................................................. 15

Swipe Right.................................................................................................................................... 15

Swipe Left.......................................................................................................................................15

Swipe Up/Down.............................................................................................................................15

Split Screen.................................................................................................................................... 16

Using Headphones.............................................................................................................................. 16

Removing the Micro-SD card..............................................................................................................17

Installing the Micro-SD Card Tray.......................................................................................................17

Removing the Battery.......................................................................................................................... 17

Installing the Battery............................................................................................................................18

Installing the micro-SIM Card.............................................................................................................18

4 Managing your tablet settings......................................................................... 20

Wi-Fi setting........................................................................................................................................ 20

Turning On/Off Wi-FiConnecting to a network.......................................................................... 20

Mobile broadband setting................................................................................................................... 21

Turning On/Off mobile broadbandConnecting to a mobile broadband

networkDisconnecting from mobile broadband networkMobile broadband

optionsService Provider hardware informationEnabling PIN lock...............................................21

Refreshing / Recovering / Re-setting your tablet..............................................................................23

Refresh your PC without affecting your filesRemove everything and re-install

WindowsAdvanced startup........................................................................................................... 24

5 Synchronizing your tablet.................................................................................25

Using Microsoft account.....................................................................................................................25

Copying music, photos, and videos................................................................................................... 25

6 Optional Stylus Features................................................................................... 26

Getting Your Stylus Ready for Use..................................................................................................... 26

Using the Optional Stylus with Your Tablet .......................................................................................27

7 Desktop Dock Features......................................................................................28

Docking Your Tablet........................................................................................................................... 29

Connecting the Power Adapter..........................................................................................................30

8 Thin Travel Keyboard Dock Features.............................................................. 31

Docking Your Tablet to the Thin Travel Keyboard Dock .................................................................. 31

9 Mobile Keyboard Dock Features......................................................................33

Docking Your Tablet to the Keyboard Dock ..................................................................................... 33

Undocking Your Tablet from the Keyboard Dock............................................................................. 34

Charging the dock.............................................................................................................................. 34

Battery behavior............................................................................................................................ 35

10 Cleaning Your Tablet....................................................................................... 36

11 Troubleshooting................................................................................................37

Battery problem...................................................................................................................................37

System problem.................................................................................................................................. 38

Touchscreen problem........................................................................................................................ 39

Network problem................................................................................................................................39

12 System Setup.....................................................................................................40

System Setup (BIOS) Options.............................................................................................................40

Updating the BIOS ............................................................................................................................. 49

13 Specifications.....................................................................................................51

14 Contacting Dell.................................................................................................55

Working on Your Tablet

Before Working Inside Your Tablet

Use the following safety guidelines to help protect your tablet from potential damage and to help to ensure your personal safety. Unless otherwise noted, each procedure included in this document assumes that the following condition exists:

• You have read the safety information that shipped with your tablet.

WARNING: Before working inside your tablet, read the safety information that shipped with your tablet. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the tablet.

CAUTION: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a card by its edges or by its metal mounting bracket.

CAUTION: When you disconnect a cable, pull on its connector or on its pull-tab, not on the cable itself. Some cables have connectors with locking tabs; if you are disconnecting this type of cable, press in on the locking tabs before you disconnect the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any connector pins. Also, before you connect a cable, ensure that both connectors are correctly oriented and aligned.

NOTE: The color of your tablet and certain components may appear differently than shown in this document.

To avoid damaging your tablet, perform the following steps before you begin working inside the tablet.

1. Ensure that your work surface is flat and clean to prevent the tablet cover from being scratched.

2. Turn off your tablet (see Turning Off Your Tablet).

3. If the tablet is connected to a docking device (docked) such as the optional docking station or

keyboard dock, un-dock it.

4. Disconnect the power adapter from the tablet.

5. Turn the tablet upside-down on a flat work surface.

NOTE: To avoid damaging the system board, you must remove the main battery before you service the tablet.

6. Remove the main battery.

7. Press and hold the power button for a few seconds to remove the flea power from the system board.

CAUTION: To guard against electrical shock, always unplug your tablet from the electrical outlet.

CAUTION: Before touching anything inside your tablet, ground yourself by touching an unpainted metal surface, such as the metal at the back of the tablet. While you work, periodically touch an unpainted metal surface to dissipate static electricity, which could harm internal components.

8. Remove the storage SD card from the tablet.

Turning off Your Tablet

Turning off your tablet completely shuts down your tablet. You can turn off your tablet by two ways:

• Using power button

• Using charms menu

1. To turn off your tablet using power button:

a. Press and hold the Power button until you see “Slide to shut down your PC” on the screen.

b. Slide to shut down your tablet.

NOTE: You can also turn off your tablet without sliding down the screen. Press and hold the Power button for >10 seconds to turn off your tablet. You can perform this force

shutdown, if your tablet is not responding / behaving unexpectedly or touch is not working.

2. To turn off your tablet using the charms menu: a. Swipe from the right edge of the display to access the Charms menu.

b. Touch Settings —> Power —> Shut down to turn off the tablet.

Setting Up Your Tablet

Charging the Tablet

CAUTION: Charge the battery in an ambient temperature of 0 °C to 40 °C.

CAUTION: Use only the power adapter and power cable that came with your tablet. Using unauthorized power adapters or power cables may cause severe damage to your tablet.

NOTE: The battery is not fully charged when you unpack your tablet.

1. Connect the power cable into the power adapter.

2. Connect the power adapter to an electrical outlet and charge the tablet until the battery is fully

charged.

NOTE: The tablet battery requires about 4 hours to fully charge.

NOTE: You can also trickle charge the tablet via micro-USB connection. The battery takes up to 24 hours to fully charge depending on the power output of the USB port.

You can check the tablet battery charge status from:

• Battery-charge light located on the front of the tablet:

LED Behavior Description

Solid white color on Battery is charging.

Off Battery is not charging. Either no AC adapter is

connected or battery is fully charged.

Amber color on Momentarily

NOTE: You can check the exact battery charge level by booting to the operating system.

• Battery icons displayed on the screen:

– The LED will be solid amber for 2 seconds

and then change to solid white. This is an indication that the system cannot power on with the current state of charge, but the

battery is being charged. – Battery is charging – The tablet will not power on.

Battery icon Description

Battery is fully charged and AC adapter is connected.

Battery is charging with AC adapter.

Your tablet is running on battery power and the battery is discharging.

Your tablet is plugged in, and either no battery is detected or the battery is not working correctly.

Battery is at low level.

Battery is at critical level.

Turning On Your Tablet

NOTE: Use this tablet in an ambient temperature between 0 °C and 40 °C.

1. Press and hold the Power button for 2 seconds to turn on your tablet.

2. If the lock screen image displays, swipe your finger from the bottom of the display to switch to the login screen, and then enter password to log in to Windows.

The tablet is ready for use after the Windows Start screen displays.

NOTE: If the login screen is not enabled in Windows 8.1, you will be taken directly from the lock screen to the start screen.

NOTE: The lock screen is only displayed when returning from a sleep state.

Turning off the Screen

Using power button

Press the Power button to turn off the screen.

Using Charms

1. Swipe from the right edge of the display to access the Charms bar.

2. Touch Settings → Power → Sleep to turn off the screen.

NOTE: If your tablet is in a sleep state, press the Power button or Windows button once to turn on the screen.

Using Your Tablet

Screen Orientation

For optimal viewing experience, the screen orientation changes automatically to portrait or landscape format depending on how you hold the tablet.

NOTE: Some applications may not support automatic screen rotation to portrait or landscape format.

How to lock / unlock the screen orientation

1. Swipe from the right edge of the display to access the Charms bar.

2. Touch Settings → Screen .

3. Touch toggle to lock the screen orientation, or touch toggle to unlock the screen orientation.

Adjusting the screen brightness

You can also adjust the screen brightness here by using the slider under the toggle menu.

You can also adjust your screen automatically. To adjust the screen brightness automatically:

1. Swipe from the right edge of the display to access the Charms bar.

2. Touch Settings → PC settings → PC and devices → Power and sleep.

3. Under Brightness, slide left or right to turn on / turn off the automatic brightness option.

NOTE: You can turn on / turn off the slider to have the screen automatically adjust the brightness, based on the ambient light.

Gestures

Your tablet has a multi-touch display. You can touch the screen to operate the tablet.

Gesture Actions Functions

Touch

Tap gently on the display with your fingertip.

• Select items on the screen, including options, entries, images, and icons

• Start applications

• Touch buttons on the screen

• Input text using the on-screen keyboard

Touch and Hold

Touch and hold your finger on the display

Drag and Drop

1. Touch and hold your finger on an item on the screen

2. Keeping your finger in contact with the display, move your fingertip to the desired location

3. Take your finger off the display to drop the item in the desired location

• Display detailed information about an item

• Open the context menu of an item to perform further actions

Move item such as images and icons on the screen

Gesture Actions Functions

Swipe or Slide

Move your finger in a vertical or horizontal direction on the display

• Scroll through the Start screen, web pages, lists, entries, photos, contacts, and so on

• Close an application. (Swipe the application to the bottom of the display)

Zoom in

Touch the display with two fingers and then move the fingers apart

Zoom out

Touch the display with two fingers and then move the fingers closer

Rotate

Touch the display with two or more fingers and then move the fingers in a clockwise or counterclockwise arc

Enlarge the view of an image or web page

Reduce the view of an image or web page

Rotate an object by 90 degrees

Right-Click

To perform a right-click on your tablet, Touch and Hold your finger for 2 seconds on any section of the screen or an icon and then release your finger.

The options menu appears on the screen.

The Windows Start Screen

The Windows Start screen displays a list of default and custom Live Tiles, which act as a shortcut to Control Panel, Windows Explorer, Weather application, RSS, Windows Store, Internet Explorer, and other installed applications.

Live Tiles on your Start screen change and update in real time so you can get real-time updates about news or sports, check what your friends are up to, and get the latest weather forecast.

The tile-based user interface gives you direct access to your most recently used applications, Emails, photos, music, videos, contacts, Facebook & Twitter updates, and frequently viewed websites. You can pin your favorite or frequently used applications as Live Tiles to customize the Start screen.

You also can personalize the Start screen by setting your favorite picture as a wallpaper.

NOTE: Live Tiles can be added or removed by using Pin or Unpin options.

How to access the Start screen

Follow either method to access the Start screen:

• Press the Windows button .

• Swipe from the right edge of the display to access the Charms bar, and then touch the Start icon .

Get to know Windows 8.1

You can touch the Help+Tips tile on the Start screen to get help and tips on using Windows 8.1.

Swipe Right

Swiping-in from the right edge of the display reveals the Charms bar. Charms provide access to the system commands, such as Start, Search, Share, Devices, and Settings options.

If your tablet is running on an application or performing actions, pressing the Start icon takes you

back to the Start screen. If you are at the Start screen, pressing the Start icon takes you to the most recently used application or most recently viewed screen.

NOTE: The functionality of the Start icon is same as Windows button .

Swipe Left

• Swiping slowly from the left edge to the right edge of the display reveals thumbnails of the open applications and cycles the thumbnails of the open applications.

• Swiping-in and out on the left edge of the display brings up a list of the most recently used applications.

Swipe Up/Down

• Swiping-in from the bottom or top edge of the display reveals the All apps icon . Touch All apps to show an alphabetical list of all applications installed on your tablet.

• Swiping-in from the top to the bottom of an application docks or closes the application.

For more information on using Windows Start screen, visit windows.microsoft.com/en-us/windows-8/ start-screen-tutorial .

You can also enable the camera (front), when the screen is in lock mode. To enable the camera when the screen is in lock mode:

1. Swipe from the right edge of the display to access the Charms bar.

2. Click Settings → Change PC Settings → PC and Devices

3. Scroll down and navigate to Camera.

4. Swipe to turn on, to use the camera during the lock screen mode.

To make sure you can use the camera during the lock screen mode:

Press Power button to turn off the screen.

2. Press Power button again to enable the lock screen mode.

3. Swipe down to enable the camera.

Split Screen

The split screen option enables you to open two applications on the same screen, which helps you in multitasking. To split the screen:

1. Open any two applications that you want to perform the split screen.

2. Swipe from the left to open the second application and hold your finger until the screen splits.

3. Release your finger to drop the second application.

NOTE: Windows 8.1 enables you to split the screen in variable width.

Using Headphones

You can use headphones to listen to music and sounds, record audio, or make calls.

WARNING: Listening to loud music for extended period of time can lead to hearing loss.

1. Connect the headphones to the audio port (3.5 mm) on the tablet.

2. Insert the earphones in your ears and adjust the volume level to a comfortable level.

NOTE: When you connect a headphone or an external audio device to the audio connector, the integrated speakers on your tablet are muted automatically.

CAUTION: To prevent damage to the headphones when disconnecting it from the tablet, pull the connector and not the cable.

NOTE: It is recommended that you turn down the volume level before plugging the headphone, and then adjust to a comfortable level. Sudden exposure to loud sounds can cause hearing damage.

Removing the Micro-SD card

CAUTION: Removing the Micro-SD card when transferring data may cause data loss or result in application errors. Make sure your tablet has finished all save operations to the Micro-SD card.

1. Enter the Desktop mode. Touch Safely Remove Hardware in the notification area at the

bottom-right corner of the screen.

NOTE: If you don’t see Safely Remove Hardware , touch Show Hidden Icons to display all icons in the notification area.

2. Touch Eject SD Memory Card. A message appears confirming that the Micro-SD card can be safely

removed. If a warning message appears stating the Micro-SD card cannot be removed, ensure all data transfers involving the Micro-SD card are complete.

3. Insert the tip of a small bent paperclip into the small hole on the micro-SD slot cover.

4. Push the tip all the way into the hole until the micro-SD tray ejects. Pull the micro-SD card tray out.

5. Remove the micro-SD card from the tray.

Installing the Micro-SD Card Tray

1. Place the SD card on the SD card tray.

2. Push the SD card tray to its place until it clicks into place.

Removing the Battery

1. Follow the procedures in Before Working Inside Your Tablet.

2. Remove the base cover.

3. Perform the following steps:

a. Slide the release latch in the direction indicated to unlock the battery. b. Push the battery forward to release it from its connector on the system board. c. Lift and remove the battery from the tablet.

Installing the Battery

1. Slide the battery into its slot until it clicks into place.

2. Install the base cover.

Installing the micro-SIM Card

CAUTION: Removing the Micro-SIM card when the tablet is on may cause data loss or damage the card. Make sure your tablet is turned off or the network connections are disabled.

1. Turn off your tablet. For more information on turning off your tablet, see Turning off Your Tablet.

2. Pry the base cover in the direction indicated and lift it at an upward angle to remove it from the

tablet.

3. Slide the release latch to unlock the battery. Lift and remove the battery from the tablet.

4. Install the micro-SIM card into its slot.

Managing your tablet settings

Wi-Fi setting

Turning On/Off Wi-Fi

1. Swipe from the right edge of the display to access the Charms bar.

Touch Settings → Change PC settings → Networks → Airplane mode.

3. Swipe Wi-Fi icon right or left to turn Wi-Fi on or off.

Connecting to a network

1. Swipe from the right edge of the display to access the Charms bar.

2. Touch Settings → Available → Select an available network → Connect

Mobile broadband setting

Turning On/Off mobile broadband

1. Swipe from the right edge of the display to access the Charms bar.

2. Touch Settings →Change PC settings → Networks → Airplane mode.

3. Swipe Mobile broadband icon left or right to turn mobile broadband on or off.

Connecting to a mobile broadband network

1. Ensure an active SIM card is inserted into the tablet.

2. Swipe from the right edge of the display to access the Charms bar.

3. Touch Setting → Network → Connections → Your Service Provider → Connect.

4. The estimated data usage will be shown once the mobile broadband network is enabled.

NOTE: You can choose the option Connect automatically to connect the mobile broadband automatically.

NOTE: Your tablet will automatically prioritize Wi-Fi networks over mobile broadband networks, when both are available. If your tablet is connected to the mobile broadband and any of saved Wi-Fi connections comes within range, it will disconnect from the mobile network and connect to the Wi-Fi automatically. For more information on turning on Wi-Fi network, see Wi-Fi setting.

Disconnecting from mobile broadband network

1. Swipe from the right edge of the display to access the Charms bar.

2. Touch Setting → Network → Your Service Provider → Disconnect.

NOTE: Once your tablet has disconnected from mobile broadband, the option Connect

automatically will be disabled as well.

Mobile broadband options

1. Swipe from the right edge of the display to access the Charms bar.

2. Touch Settings →Networks .

3. Touch and hold Your Service Provider or right-click if docked.

• Touch Show estimated data usage/Hide estimated data usage to show or hide your data usage.

• Touch Set as metered connection/Non metered connection to set a particular connection as a

metered/non-metered connection.

• Touch View connection properties to view your connected mobile broadband properties.

NOTE: If the option Set as metered connection is enabled, Windows Update will not download updates automatically unless it is a high priority, critical security update.

Service Provider hardware information

1. Swipe from the right edge of the display to access the Charms bar.

2. Touch Settings → Change PC settings → Network.

3. Touch Your Service Provider to view the hardware information including the subscriber information

and International Mobile Equipment Identity (IMEI) number.

Enabling PIN lock

1. Swipe from the right edge of the display to access the Charms bar.

2. Touch Settings → Network .

3. Touch and hold Your Service Provider or right-clicked if docked.

4. Touch View connection properties→Security→Use a PIN.

5. Enter your SIM PIN Code.

NOTE: Your Service Provider refers to the network service providers available in your location.

CAUTION: If you enter the incorrect PIN code, your mobile broadband connection will not be established. If you unsuccessfully enter the code three times, your SIM card will be locked. To unlock the SIM card, contact your service provider to get a Personal Unblocking Key (PUK) to unlock the SIM card.

NOTE: Before you contact your carrier, have your IMEI number ready.

Refreshing / Recovering / Re-setting your tablet

You can refresh / recover / restore your tablet to original factory settings.

1. Swipe from the right edge of the display to access the Charms bar.

2. Touch Settings → Change PC Settings → Update and recovery → Recovery.

• Refresh your PC without affecting your files

• Remove everything and reinstall Windows

• Advanced startup

3. Select any recovery option to complete the task.

Refresh your PC without affecting your files

This option enables you to refresh your tablet without losing your photos, music, videos, and other personal files. If you want to perform this action:

1. Click Get started. The Refresh your PC window opens.

2. Click Next.

3. Click Refresh.

Click Cancel to cancel this action.

Remove everything and re-install Windows

This option enables you to recycle or start over your tablet completely, and you can reset to its default / factory settings. If you want to perform this action:

1. Click Get Started. The Rest your PC window opens.

2. Click Next.

After you click Next, you will now have to select any of the two below options to finish the task:

• Just remove my files — If you select this option, Windows removes all your files including your photos, music, videos, and other personal files.

• Fully clean the drive — If you select this option, Windows resets your tablet.

CAUTION: Resetting your tablet erases all data from your tablet, including your account configuration, music, pictures, files, and so on. Ensure that you back up all the required data before you proceed.

Click Cancel to cancel this action.

Advanced startup

This option enables you to start up from a device or compact disc (such as DVD or USB drive) and change your tablet’s firmware settings, change Windows startup settings, or restore Windows from the system image. If you want to perform this action, click Restart Now.

NOTE: Third-party applications will be removed.

Synchronizing your tablet

Using Microsoft account

If your computer has Microsoft Windows 8.1 installed, you can synchronize user settings of your tablet with your computer using a Microsoft account. When you sign in with your Microsoft account on your tablet, you can automatically synchronize your settings, including internet browser history, application settings, and personal files etc., with other Windows 8.1 PCs and Windows 8.1 tablets.

NOTE: You need a wireless connection for both your computer and tablet.

Go to Charms bar, then click Settings → PC Settings →Accounts → Switch to a Microsoft

account

2. A new option will be added to PC Settings called Sync your settings.

3. Click Settings → PC Settings → More PC Settings → Sync your settings to show all kind of

toggles for synchronizing your data and settings.

Copying music, photos, and videos

to switch your computer local account to your Microsoft account.

1. Connect a USB key or a Micro-SD card to the computer and copy the required files.

2. After the copy is complete, use the Safely Remove Hardware wizard to remove your tablet from the

computer.

3. You can also use the Skydrive feature of Win 8.1 to copy music, photos, and videos.

Optional Stylus Features

This section provides information about the features available on the Stylus.

Feature Functionality

1 Pen lead Provides touch functionality.

2 Pen button Used to perform a left-click and right-click.

3 Middle barrel Provides access to the battery compartment.

4 Pen clip / Pen rear cap Used to secure the stylus in your pocket.

NOTE: The Stylus is optional and is sold separately.

NOTE: This Stylus only works with the Dell Venue 11 pro-5130 and Dell Venue 11 pro-7130/7139 tablets. It is not designed to work the earlier family of Dell tablets. Also, the stylus purchased for use with any other Dell tablets is not supported by the Dell Venue 11 pro-5130 and Dell Venue 11 pro-7130/7139 tablets.

You can replace the Stylus pen lead, as shown in the below image.

Getting Your Stylus Ready for Use

1. Twist the middle barrel in a counter clockwise direction.

2. Insert a AAAA battery with the positive side facing the tip of the pen.

NOTE: Follow your local and regional statutes and regulations on disposal of battery waste.

3. Re-assemble the barrel securely.

Using the Optional Stylus with Your Tablet

The Stylus is ergonomically designed to work with your tablet for long time periods. The user can seamlessly switch between pen and finger entry without any manual mode switching. The stylus supports features such as palm rejection, hovering, and pressure sensing, which allow for industry leading accuracy and ease of use with no calibration necessary. The two buttons are software configurable for using features such as erasing, highlighting, or performing mouse clicks. You can use the tip of the stylus to draw shapes, select text, turn a page and write or sign the documents on your tablet.

You can also press the button on the side of the stylus to perform the left-click and right-click functions on your tablet.

Desktop Dock Features

This section provides information about the features available on the Desktop dock.

Feature Functionality

1 USB 3.0 connector Connect USB devices, such as flash memory.

2 Audio connector Connect headphones or external speakers.

3 Power status light Indicates the power status.

4 Docking connector Connect the docking connector on the tablet.

5 Power connector Connect the AC adapter.

6 USB 3.0 connectors Connect USB devices, such as flash memory.

7 Network connector Connect an Ethernet cable for internet access.

8 HDMI connector Connect HDMI-capable devices such as projectors, TV’s, and

monitors.

9 DisplayPort connector Connect DisplayPort-capable devices such as projectors, TV’s, and

monitors.

NOTE: Display port output supports only direct DisplayPort to DisplayPort or active DisplayPort adapters. Passive adapters are not supported by display port.

NOTE: The desktop dock will only support USB 2.0 when docked with Venue Pro 11–5130.

NOTE: The Desktop dock is sold separately and is not shipped with the tablet.

NOTE: In Venue Pro 11–5130, you can use the HDMI connector or DisplayPort connector to mirror the same external display. You can use unique content display through the HDMI connector or DisplayPort connector only in Venue Pro 11 – 7130/7139.

Docking Your Tablet

The following images show how to dock your tablet:

Connecting the Power Adapter

Connect one end of the power adapter to a wall socket and the other end to the power-connector port on the desktop dock.

Thin Travel Keyboard Dock Features

This section provides information about the features available on the Thin keyboard dock.

Table 1.

Feature Functionality

1 Magnets Magnets to enable docking.

2 Docking pins Allows the tablet to make electrical contact with the dock.

3 Docking Connectors

4 Touch pad Allows you to move the mouse pointer on the screen and provides the function of a

NOTE: The Thin travel keyboard dock is sold separately and is not shipped with the tablet.

Connect the docking connector on the tablet.

mouse.

Docking Your Tablet to the Thin Travel Keyboard Dock

1. Align the two docking connectors on the tablet to those on the dock.

2. Slide the tablet downward until the tablet clicks into place..

3. Attach the keyboard cover and slide it down to attach the dock to the tablet.

NOTE: When the connection is made, you need to manually turn the on-screen keyboard off if it is displayed on the screen.

Mobile Keyboard Dock Features

This section provides information about the features available on the keyboard dock.

Feature Functionality

1 Docking connectors Connect the docking guide slots on the tablet.

2 Rotatable hinge Allows the tablet to rotate around the hinges.

3 Touch pad Allows you to move the mouse pointer on the screen and provides the

function of a mouse.

4 Dock Pins Allows the tablet to make electrical contact with the dock.

5 micro USB power connector Connect a micro USB charger to charge the dock

6 Caps Lock LED Indicates if the Caps Lock key on the keyboard is turned on.

7 Battery charge LED Indicates if the battery is charging when connected to AC power.

NOTE: It is recommended / easier to dock the tablet at a 90-degree angle.

NOTE: The keyboard dock is sold separately and is not shipped with the tablet.

Docking Your Tablet to the Keyboard Dock

1. Rotate the keyboard dock to a 90-degree angle.

NOTE: The hinge position will be open, when you dock you tablet to the keyboard dock.

2. Dock the tablet to the keyboard dock.

NOTE: When the connection is made, you need to manually turn the on-screen keyboard off if it is displayed on the screen.

Undocking Your Tablet from the Keyboard Dock

1. Push and hold the button on the Mobile Keyboard dock.

2. Lift the tablet from the Mobile Keyboard dock.

Charging the dock

CAUTION: Use only the supplied power adapter and power cable to charge your tablet and dock. Using unauthorized power adapters or power cables may cause severe damage to your tablet and dock.

1. Connect the power adapter to the microUSB charging port on your keyboard dock.

2. The keyboard dock charges through the tablet if AC power is attached to the tablet.

NOTE: Power can't be directly attached to travel keyboard when the tablet is docked.

NOTE: The dock battery requires about four hours to fully charge.

For more information on the tablet battery charging time, see Charging the tablet.

You can check the keyboard dock battery status from:

• Battery-charge light located on the left side of the keyboard dock:

LED behavior Description

Solid white color on Battery is charging with AC power when AC

adapter is connected directly to the dock.

Off Battery is not charging, either no AC adapter is

connected or battery is fully charged or the AC power is connected directly to the tablet.

For more information on checking the tablet battery status, see tablet battery charge status.

Battery behavior

When AC power is connected, the tablet gets charged first followed by the dock. During discharge or when AC power is not connected, the dock battery gets used first followed by the tablet.

Cleaning Your Tablet

CAUTION: Before you clean your tablet, disconnect all cables. Clean your tablet with a soft cloth dampened with water. Do not use liquid or aerosol cleaners, which may contain flammable substances.

1. Turn off your tablet. For more information on turning off your tablet, see Turning Off Your Tablet.

2. Disconnect any attached devices, headphones, speakers, and keyboard dock from the tablet and

from their electrical outlets.

3. Remove any installed Micro-SD and Micro-SIM card. For more information on removing the Micro-

SD card and Micro-SIM card, see Remove the Micro-SD card and Remove the Micro-Sim card.

4. Moisten a soft, lint-free cloth with either water or a display cleaner, and wipe the surface of the

tablet until it is clean. Do not allow water from the cloth to seep down to the tablet ports and surrounding Windows button.

NOTE: To avoid damaging the tablet or display, follow the instructions that are included with the product.

NOTE: Do not clean the keyboard with a moist cloth.

Troubleshooting

Battery problem

Problems Possible causes Possible solutions

Battery does not charge

• Unplug the Dell AC power adapter from the wall and verify that the outlet is functioning.

• Check all cable connections and plug back into the wall, then back into the tablet.

• Check the AC adapter LED light to ensure if the AC adapter is working.

• Check all connectors to ensure proper connectivity.

If the AC adapter works and the battery does not charge, try to:

• Remove and re-insert the battery to ensure the battery fits to its connectors properly.

• Replace with another battery, if available.

NOTE: The tablet battery requires about 4 hours to fully charge.

Battery drains quickly even when the tablet is in Standby mode

The tablet's temperature is below 0 °C or higher than 40 °C.

The battery or power adapter is damaged.

If the tablet is not in the range of a network it can connect to, the tablet continues to send out signals to locate a base station and drains the battery.

Charge the battery in an ambient temperature between 0 °C to 40 °C.

Contact a Dell authorized reseller to replace the battery or power adapter.

• Temporarily turn off the tablet.

• Move the tablet in range of a network it can

connect to, or temporarily turn off the wireless connection on your tablet.

• Use your tablet in airplane mode.

System problem

Problems Possible causes Possible solutions

Tablet does not turn on The battery is completely

discharged.

Tablet does not turn off Press and hold the Power button

Tablet locks up

Tablet is not responding or behaving unexpectedly

Software or feature is not working as expected

• Driver failure

• Operating system failure

• Virus/Malware

1. Charge the tablet for at least 4 hours.

2. Press and hold the Power button for 4 seconds.

for 11 seconds to perform a hard shut down.

1. Press and hold the power button for 11 seconds to perform a hard shut down.

2. Remove the power supply and unplug / plug the battery.

1. Shut down and restart your tablet.

2. Refresh the tablet.

3. Contact Dell’s support service. Go to dell.com/ support or dell.com/ contactdell.

Restart your tablet. Software updates may have been downloaded in the background. Swipe from the right edge of the display to access the Charms bar and touch Settings→ Power→ Restart to restart the tablet.

Docking station not working as expected

Un-dock / Re-dock your tablet. If the issue still continues, power cycle your tablet on the dock.

Touchscreen problem

Problems Possible causes Possible solutions

Touchscreen responds slowly or improperly

Protective cover prevents the tablet from recognizing your inputs.

• Shutdown and restart your

tablet.

• Gently wipe the display with a

clean dry cloth.

• Remove any protective covers

from the touchscreen.

• If the operating system is re-

installed, make sure all the drivers are installed.

Network problem

Problems Possible causes Possible solutions

No wireless connection

No mobile broadband connection

• The mobile broadband has been capped.

• No signal from the service provider.

1. Check if the wireless radio is on. See Wi-Fi setting .

2. Try to get closer to the wireless access point.

3. Reset the wireless router if using a private network; open the browser to view the landing page if using a public network.

1. Check if the mobile broadband is turned on. See

Turning On/Off mobile broadband

2. Move your tablet to a different location for better signal reception.

Contact your service provider to change your broadband plan.

System Setup

System Setup enables you to manage your computer hardware and specify BIOS‐level options. From the System Setup, you can:

• Change the NVRAM settings after you add or remove hardware

• View the system hardware configuration

• Enable or disable integrated devices

• Set performance and power management thresholds

• Manage your computer security

To access the system setup options (BIOS):

1. Connect your tablet to the keyboard dock or connect a USB enabled keyboard to your tablet.

2. Press the Power button to turn on your tablet or restart your tablet, if you have already turned

on your tablet.

3. Press F2 after the Dell logo appears.

NOTE: You might have to press F2 repeatedly until the Windows redirects to the system setup options.

To access the setup options (BIOS) without an external keyboard :

1. Press the Power button to turn on your tablet or restart your tablet, if you have already turned

on your tablet.

2. Press and hold the Volume Up button when the Dell logo appears on the screen.

3. When the F12 Boot Selection menu appears, press the Volume Up button to change the boot

selection to the BIOS Setup option.

NOTE: The Volume Up button cycles through the menu options (Boot Options, BIOS Setup, Diagnostics, and so on. You can select the desired option by pressing the Volume Up button.)

4. Press the Volume Down button to select the option.

System Setup (BIOS) Options

Table 2. System Information

Option Function

BIOS Version Displays the BIOS revision.

Service Tag Displays the service tag of your tablet.

Asset Tag Displays the asset tag of your tablet.

Ownership Tag Displays the ownership information.

Option Function

Manufacture Date Displays the date of manufacture

Ownership Date Displays the ownership

date.

Express Service Code Displays the Express

Service code of the tablet.

Memory Installed Displays the memory installed on the tablet.

Memory Available Displays the memory available on the tablet.

Memory Speed Displays the memory speed.

Memory Channel Mode Displays the memory

capacities on the tablet.

Memory Technology Displays new type of

device file in Linux for interacting with flash memory.

Processor Type Displays the processor

type available on the tablet.

Core Count Displays the core count

of the tablet.

Processor ID Displays the processor

ID of the tablet.

Current Clock Speed Displays the current

clock speed of the tablet.

Minimum Clock Speed Displays the minimum

clock speed of the tablet.

Maximum Clock Speed Displays the maximum

clock speed of the tablet.

Processor L2 Cache Displays the L2 cache of

the tablet.

Processor L3 Cache Displays the L3 cache of

the tablet.

HT Capable Displays the tablet is

Hyper-Thread capable.

64–bit Technology Displays the tablet

functions with 64-bit

Option Function

technology (Intel EM64T).

Video Controller Displays the video

controller used in the tablet.

Video BIOS Version Displays the BIOS

version number of the tablet.

Video Memory Displays the video

memory of the tablet.

Panel Type Displays the panel type

used in the tablet.

Native Resolution Displays the resolution

of the tablet.

Audio Controller Displays the audio

controller used in the tablet.

Wi-Fi Device Displays the Wi-Fi device

in the tablet.

Cellular Device Displays the cellular

device in the tablet.

Bluetooth Device Displays the Bluetooth

device in the tablet.

Table 3. Battery Information

Option Function

AC Adapter Displays the AC Adapter information.

Battery Status Displays the current battery status.

Battery Charge State Displays if the battery is charging/discharging.

Battery Health Displays the battery health.

Table 4. Boot Sequence

Option Function

Boot Sequence Displays the order that the BIOS searches devices

when trying to find an operating system to boot. The options are:

• Windows Boot Manager

• UEFI

Boot List Option Allows you to change the boot list option.

Option Function

• Legacy

• UEFI

You can also perform other options. The options are:

• Add Boot Option — This option allows you to add a boot option

• Delete Boot Option — This option allows you to delete an existing boot option

• View — This option allows you to view a boot option

Table 5. Advanced Boot Options

Option Function

For Dell Venue Pro 11– 7130/7139

Enable Legacy Option ROMs During the UEFI boot mode, the Enable Legacy

Option ROMs option will allow legacy option ROMs to load. This option is not allowed if Secure Boot is enabled.

For Dell Venue Pro 11– 5130

Enable UEFI Network Stack Enable UEFI Network Stack function with IPV4/

IPV6 PXE protocol support.

Table 6. Date/Time

Option Function

System Date Displays the system date.

System Time Displays the system time.

Table 7. System Configuration

Option Function

USB Configuration Allows you to configure the integrated USB

controller. The options:

• Enable Boot Support

• Enable USB3.0 Controller

• Enable External USB Port

By default, all the options are enabled.

USB PowerShare Allows you to configure

the USB PowerShare feature behavior. Default: Not enabled

Option Function

Audio This field allows you to

enable or disable the integrated audio connector.

• Enable Audio. Default: Enabled

Miscellaneous Devices Allows you to enable or disable various on-board

devices.

• Enable Microphone. Default: Enabled

• Enable Camera. Default: Enabled

• Enable Media Card. Default: Enabled

• Disable Media Card

Table 8. Video

Option Function

LCD Brightness Displays the panel brightness when the ambient

light sensor is off.

• Brightness on Battery

• Brightness on AC

Table 9. Security

Option Description

Admin Password This field lets you set, change, or delete the administrator (admin)

password (also known as the setup password). The admin password enables several security features.

The drive does not have a password set by default.

To add a new password:

• Enter the old password

• Enter the new password

• Confirm the new password

Click OK after entering the password details.

System Password Allows you to set, change, or delete the tablet password (previously called

the primary password). The drive does not have a password set by default.

To add a new password:

• Enter the old password

• Enter the new password

• Confirm the new password

Click OK after entering the password details.

Option Description

Strong Password

Password Configuration This field controls the minimum and maximum number of characters

Password Bypass This option lets you bypass the system (Boot) Password and the internal

Password Change Allows you to determine whether changes to the system and hard disk

Enable strong password - This option is disabled by default.

allowed for the admin and system passwords. Changes to these fields are not active until they are committed via the apply button or saving changes before exiting setup.

• Admin Password Min

• Admin Password Max

• System Password Min

• System Password Max

HDD password prompts during a system restart.

• Disabled

• Reboot Bypass (Default Enabled)

passwords are permitted when an administrator password is set.

• Allow Non-Admin Password Changes (Default)

Non-Admin Setup Changes

TPM Security This option lets you control whether the Trusted Platform Module (TPM) in

PTT Security Allows you to enable or disable PTT Support.

Computrace (R) This field lets you activate / de-activate or disable the BIOS module

This option lets you determine whether changes to the setup options are permitted when an administrator password is set.

• Allow Wireless Switch Changes (Default)

the system is enabled and visible to the operating system. TPM Security (Default)

• TPM ACPI Support

• Deactivate

• Activate

NOTE: Activation, deactivation, and clear options are not affected if you load the setup program's default values. Changes to this option take effect immediately.

• PTT Security (Default)

• Revoke Trust (Default)

interface of the optional Computrace Service from Absolute Software.

• Deactivate (Default)

• Disable

• Activate

CPU XD Support This option enables or disables the Execute Disable mode of the

Processor.

Option Description

• Enable CPU XD Support (Default Enable)

Admin Setup Lockout Allows you to enable or disable the option to enter setup when an admin

password is set.

• Enable Admin Setup Lockout (Default)

Table 10. Secure Boot

Option Function

Secure Boot Allows you to enable or disable the secure boot

feature. Default : Disabled

Expert Key Management Allows you to manipulate the security key

databases only if the system is in Custom Mode. The Enable Custom Mode option is disabled by default. The options are:

• PK

• KEK

• db

• dbx

If you enable the Custom Mode, the relevant options for PK, KEK, db, and dbx appear. The options are:

• Save to File- Saves the key to a user-selected file

• Replace from File- Replaces the current key with a key from a user-selected file

• Append from File- Adds a key to the current database from a user-selected file

• Delete- Deletes the selected key

• Reset All Keys- Resets to default setting

• Delete All Keys- Deletes all the keys

NOTE: If you disable the Custom Mode, all the changes made will be erased and the keys will restore to default settings.

Table 11. Performance

Option Description

Multi Core Support Specifies whether the processor will have one or all cores enabled. The

performance of some applications will improve with the additional cores.

• All (Default)

• 1

• 2

Intel SpeedStep Allows you to enable or disable the Intel SpeedStep mode of the

processor.

• Enable Intel(R) SpeedStep (Default)

Option Description

C States Control Allows you to enable or disable the additional processor sleep states.

• C states (Default)

Intel TurboBoost Allows you to enable or disable Intel TurboBoost mode of the processor.

• Enable Intel TurboBoost (Default) — Allows the Intel TurboBoost driver to increase the performance of the CPU or graphics processor.

HyperThread control Allows you to enable or disable the HyperThreading in the processor.

Default: Enabled

Rapid Start Technology This option may improve the battery life by automatically putting the tablet

into a low power state during the sleep state, for a user-specified amount of time. The options are:

• Intel Rapid Start Feature

• Transition to Rapid Start when using timer

By default, all the options are enabled.

Table 12. Power Management

Option Description

AC Behavior Allows the tablet to power-on automatically, when AC adapter is

plugged. The option is disabled.

• Wake on AC

Auto On Time Allows you to set the time at which the system must turn on

automatically. The options are:

• Disabled (Default)

• Every Day

• Weekdays

• Select Days

Peak Shift This option allows to use minimize AC consumption during peak power

time of day.

• Monday

• Tuesday

• Wednesday

• Thursday

• Friday

• Saturday

• Sunday

Advanced Battery Charge Configuration

This option places batteries in the system advanced battery charging mode to maximize battery health.

• Monday

• Tuesday

• Wednesday

• Thursday

• Friday

• Saturday

Option Description

• Sunday

Primary Battery Charge Configuration

• Adaptive

• Standard

• ExpressCharge

• Primary AC Use

• Custom

NOTE: Some of the battery settings may not be available for all battery types. To enable this option, you should disable the Advanced Battery Charge Configuration Mode.

Intel Smart Connect Technology

Table 13. POST Behavior

This option, if enabled, will periodically sense the nearby wireless connections, while the tablet is asleep. Default: Disabled

Option Description

Adapter Warnings Allows you to activate the adapter warning messages when certain

power adapters are used. The option is enabled by default.

• Enable Adapter Warnings

Fastboot This option can speed up the boot process by bypassing some

compatibility steps.

• Minimal

• Thorough

• Auto (Default Enable)

NOTE: Enabling the Fastboot will prevent F2 BIOS access through USB or Thin / Travel keyboard. You can still access the BIOS Setup, by pressing the Volume Up button after the Dell logo screen appears.

Table 14. Virtualization Support

Option Description

Virtualization This option specifies whether a Virtual Machine Monitor (VMM) can

utilize the additional hardware capabilities provided by Intel Virtualization technology.

• Enable Intel Virtualization Technology (Default)

VT for Direct I/O This option specifies whether a Virtual Machine Monitor (VMM) can

utilize the additional hardware capabilities provided by Intel Virtualization Technology for Direct I/O.

• Enable VT for Direct I/O (Default)

Trusted Execution This option specifies whether a Measured Virtual Machine Monitor

(MVMM) can utilize the additional hardware capabilities provided by Intel Trusted Execution Technology. Default: disabled

Table 15. Wireless

Option Description

Wireless Device Enable Allows you to enable or disable the wireless devices

• WWAN (Default Enable)

• WLAN / WiGig

Table 16. Maintenance

Option Description

Service Tag Displays the service tag of your tablet.

Asset Tag Allows you to create a system asset tag if an asset tag is not already set.

This option is not set by default.

Table 17. System Logs

Option Description

BIOS events Displays the system event log and allows you to clear the log.

• Clear Log

Power events Displays the power event log and allows you to clear the log.

• Clear Log

Updating the BIOS

It is recommended to update your BIOS (system setup), on replacing the system board or if an update is available. For tablet, ensure that the battery is fully charged and connected to a power outlet

1. Re-start the tablet.

2. Go to dell.com/support.

3. Enter the Service Tag or Express Service Code and click Submit.

NOTE: To locate the Service Tag, click Where is my Service Tag?

NOTE: If you cannot find your Service Tag, click Detect My Product. Proceed with the instructions on screen.

4. If you are unable to locate or find the Service Tag, you can select your product from the products list under the General Support.

5. Choose the Product Type from the list.

6. Select your product model and the Product Support page of your product appears.

7. Click Get Drivers and click View All Drivers.

The Drivers and Downloads page opens.

8. On the Drivers and Downloads screen, under the Operating System drop-down list, select BIOS.

9. Identify the latest BIOS file and click Download File. You can also analyze which drivers need an update. To do this for your product, click Analyze

System for Updates and follow the instructions on the screen.

10. Select your preferred download method in the Please select your download method below window; click Download File.

The File Download window appears.

11. Click Save to save the file on your tablet.

12. Click Run to install the updated BIOS settings on your tablet.

Follow the instructions on the screen.

Specifications

NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For more information about the configuration of your computer, go to Help and Support in your Windows operating system and select the option to view information about your computer.

System Information

System Chipset Intel Atom Z3770 series

DRAM bus width 64 bits/channel ( LPDDR3 x 2CH)

Flash EPROM 128Mbit SPI

Processor

Processor type Intel Atom Z3770 processor

External bus frequency 1066MT/s (LPDDR3)

Memory

Memory capacity 2GB; 1GB x 2 CH( 64-bit bus width per channel)

Memory type LPDDR3

Memory speed 1066 MT/s

Minimum memory 2 GB

Maximum memory 2 GB

Video

Video type

Gen7 embedded in the Bay Trail-T SoC

Data bus

Video controller Gen7 Media decode ( H.

264(1080p60),MPEG2,MVC,VC-1,WMV9,VP8,MJPEG )

Communications

Network adapter LTE, HSPA+

Wireless WLAN, BT, NFC

Ports and Connectors

Audio 3.5 mm jack x1

Video Mini HDMI x1

USB 3.0 one USB3.0 connector

Memory card reader Micro-SD card socket

Docking port Dell 40-pin dock connector x1

Subscriber Identity Module (SIM) port Micro SIM slot x1

Smart card None

Display

Type TFT-LCD with eDP I/F

Size 10.8 inches diagonal

Dimensions:

Height 250.20 mm (9.85 inches)

Width 149.25 mm (5.90 inches)

Diagonal 274.32 mm (10.08 inches)

Active area (X/Y) 239.04 mm / 134.46 mm

Maximum resolution 1920 x 1080 pixels

Maximum brightness 400 nits

Refresh rate

Minimum viewing angles:

Horizontal 80/80

Vertical 80/80

Pixel pitch

Camera (Front)

Type OV 2722 (2 MP)

Resolution 1920 x 1080 pixels

Camera (Back)

Type IMX 175 (8 MP)

Resolution 3264 x 2448 pixels

Storage

Storage eMMC 4.5.1 32 GB (HS200) / eMMC 4.5.1 64GB

(HS200)

Battery

Type

Dimensions

Depth 230.64 mm (9.08 inches)

Height 4.71 mm (0.19 inch)

Width 83.3 mm (3.28 inches)

Weight 220.00 g (0.49 lb)

Voltage 7.4 VDC (nominal) and 8.7 VDC (maximum)

Temperature range

Operating

Non-Operating -20 °C to 65 °C; 4 °F to 149 °F

Coin-cell battery 3 V CR1220 lithium ion

2 Series X 1 Parallel (2S1P) Lithium ion

32Wh (Nominal)

Charge:

0 °C to 50 °C; 32 °F to 158 °F

Discharge:

0 °C to 70 °C; 32 °F to 122 °F

Voltage : 3V

Capacity : 35mAh (23+/- 3 degree)

Weight: 0.8g

Temperature : -20 ~ +60 degree.

AC Adapter

Type

Input voltage 100 VAC to 240 VAC

Input current (maximum) 0.60 A

Input frequency 50 Hz to 60 Hz

Output power 23.4 W / 30 W

Output current (30 W) 19.5 V / 1.2 A (Continuous) 19.5 V / 1.53 A (peak

current) ; 5 V / 2 A (Continuous)

Rated output voltage 19.5 Vdc

Temperature range:

Operating 0 °C to 40 °C (32 °F to 104 °F)

Non-operating –40 °C to 70 °C (–40 °F to 158 °F)

Physical

Height 176.76 mm (6.96 inches)

Width 279.74 mm (11.01 inches)

Depth 10.20 mm (0.40 inches)

Weight (minimum) 726.3 g

Environmental

Temperature:

Operating 0 °C to 40 °C

Storage -40 °C to 65 °C

Relative humidity (maximum):

Operating Operating 10% to 90% (noncondensing)

Storage Storage 5% to 95% (noncondensing)

Altitude (maximum):

Operating

Non-operating –15.2 m to 10,668 m (–50 ft to 35,000 ft)

Airborne contaminant level G1 as defined by ISA-71.04–1985

–16 m to 3048 m (–50 to 10,000 ft)

Contacting Dell

NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog.

Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues:

1. Go to dell.com/support.

2. Select your support category.

3. Verify your country or region in the Choose a Country/Region drop-down list at the bottom of the

page.

4. Select the appropriate service or support link based on your need.

Dell T06G User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Working on Your Tablet

Before Working Inside Your Tablet

Turning off Your Tablet

Setting Up Your Tablet

Charging the Tablet

Turning On Your Tablet

Turning off the Screen

Using Your Tablet

Screen Orientation

How to lock / unlock the screen orientation

Adjusting the screen brightness

Gestures

Right-Click

The Windows Start Screen

How to access the Start screen

Get to know Windows 8.1

Swipe Right

Swipe Left

Swipe Up/Down

Split Screen

Using Headphones

Removing the Micro-SD card

Installing the Micro-SD Card Tray

Removing the Battery

Installing the Battery

Installing the micro-SIM Card

Managing your tablet settings

Wi-Fi setting

Mobile broadband setting

Refreshing / Recovering / Re-setting your tablet

Synchronizing your tablet

Using Microsoft account

Copying music, photos, and videos

Optional Stylus Features

Getting Your Stylus Ready for Use

Using the Optional Stylus with Your Tablet

Desktop Dock Features

Docking Your Tablet

Connecting the Power Adapter

Thin Travel Keyboard Dock Features

Docking Your Tablet to the Thin Travel Keyboard Dock

Mobile Keyboard Dock Features

Docking Your Tablet to the Keyboard Dock

Undocking Your Tablet from the Keyboard Dock

Charging the dock

Battery behavior

Cleaning Your Tablet

Troubleshooting

Battery problem

System problem

Touchscreen problem

Network problem

System Setup

System Setup (BIOS) Options

Updating the BIOS

Specifications

Contacting Dell