Dell OptiPlex 7010 Owner's Manual

Dell OptiPlex 9010/7010 Desktop Owner's Manual
Regulatory Model: D05D Regulatory Type: D05D002
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
© 2013 Dell Inc.
Trademarks used in this text:
OptiPlex are registered trademarks or trademarks of Intel Corporation in the U.S. and other countries. AMD Opteron Devices, Inc.
Vostro
,
Microsoft
, and
,
AMD Phenom
®
, the DELL logo,
Dell
Wi-Fi Catcher
,
AMD Sempron
Windows
®
,
are trademarks of Dell Inc.
,
MS-DOS
Dell Precision
,
AMD Athlon
®
,
Windows Vista trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. owned by the Blu-ray Disc Association (BDA) and licensed for use on discs and players. The trademark and owned by the
Bluetooth
®
SIG, Inc. and any use of such mark by Dell Inc. is under license.
,
Precision ON
Intel
,
ATI Radeon
®
, the Windows Vista start button, and
®
Pentium
,
,
ExpressCharge
®
,
, and
ATI FirePro
Xeon
®
Core
, AMD
Bluetooth
,
Latitude
Atom
,
®
is a registered trademark and
are trademarks of Advanced Micro
Office Outlook
®
trademark of Wireless Ethernet Compatibility Alliance, Inc.
2013 – 08
Rev. A01
,
Latitude ON
Centrino
,
Blu-ray Disc
word mark is a registered
®
is a registered
Wi-Fi
,
®
Celeron
, and
®
are either
is a trademark
®
Contents
1 Working on Your Computer....................................................................................................... 5
Before Working Inside Your Computer.....................................................................................................................5
Turning Off Your Computer....................................................................................................................................... 6
After Working Inside Your Computer........................................................................................................................6
2 Removing and Installing Components..................................................................................... 7
Recommended Tools................................................................................................................................................ 7
Removing The Cover.................................................................................................................................................7
Installing The Cover.................................................................................................................................................. 7
Removing The Intrusion Switch................................................................................................................................8
Installing The Intrusion Switch.................................................................................................................................9
Removing The Wireless Local Area Network (WLAN) Card.................................................................................... 9
Installing The WLAN Card...................................................................................................................................... 10
Removing The Front Bezel...................................................................................................................................... 10
Installing The Front Bezel....................................................................................................................................... 11
Removing The Expansion Card............................................................................................................................... 11
Installing The Expansion Card................................................................................................................................ 12
Memory Module Guidelines................................................................................................................................... 12
Removing The Memory...........................................................................................................................................13
Installing The Memory............................................................................................................................................13
Removing The Coin-Cell Battery.............................................................................................................................14
Installing The Coin-Cell Battery.............................................................................................................................. 14
Removing The Hard Drive....................................................................................................................................... 14
Installing The Hard Drive........................................................................................................................................ 16
Removing The Optical Drive................................................................................................................................... 16
Installing The Optical Drive.....................................................................................................................................18
Removing The Speaker...........................................................................................................................................18
Installing The Speaker............................................................................................................................................19
Removing The Power Supply Unit.......................................................................................................................... 19
Installing The Power Supply Unit............................................................................................................................23
Removing The Heat Sink.........................................................................................................................................24
Installing The Heat Sink..........................................................................................................................................25
Removing The Processor........................................................................................................................................25
Installing The Processor.........................................................................................................................................26
Removing The System Fan......................................................................................................................................26
Installing The System Fan.......................................................................................................................................29
Removing The Thermal Sensor...............................................................................................................................29
Installing The Front Thermal Sensor.......................................................................................................................31
Removing The Power Switch..................................................................................................................................31
Installing The Power Switch...................................................................................................................................33
Removing The Input/Output Panel..........................................................................................................................33
Installing The Input/Output Panel........................................................................................................................... 35
Removing The System Board..................................................................................................................................35
System Board Layout..............................................................................................................................................37
Installing The System Board...................................................................................................................................38
3 System Setup............................................................................................................................. 39
Boot Sequence....................................................................................................................................................... 39
Navigation Keys......................................................................................................................................................39
System Setup Options.............................................................................................................................................40
Updating the BIOS ................................................................................................................................................. 48
Jumper Settings......................................................................................................................................................48
System and Setup Password..................................................................................................................................48
Assigning a System Password and Setup Password...................................................................................... 49
Deleting or Changing an Existing System and/or Setup Password..................................................................49
Disabling a System Password..........................................................................................................................50
4 Diagnostics.................................................................................................................................51
Enhanced Pre-Boot System Assessment (ePSA) Diagnostics...............................................................................51
5 Troubleshooting Your Computer.............................................................................................53
Power LED Diagnostics.......................................................................................................................................... 53
Beep Code.............................................................................................................................................................. 54
Error Messages...................................................................................................................................................... 54
6 Specifications............................................................................................................................ 59
7 Contacting Dell ......................................................................................................................... 67

Working on Your Computer

Before Working Inside Your Computer

Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your personal safety. Unless otherwise noted, each procedure included in this document assumes that the following conditions exist:
You have read the safety information that shipped with your computer.
A component can be replaced or--if purchased separately--installed by performing the removal procedure in reverse order.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/ regulatory_compliance
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.
1
CAUTION: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a card by its edges or by its metal mounting bracket. Hold a component such as a processor by its edges, not by its pins.
CAUTION: When you disconnect a cable, pull on its connector or on its pull-tab, not on the cable itself. Some cables have connectors with locking tabs; if you are disconnecting this type of cable, press in on the locking tabs before you disconnect the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any connector pins. Also, before you connect a cable, ensure that both connectors are correctly oriented and aligned.
NOTE: The color of your computer and certain components may appear differently than shown in this document.
To avoid damaging your computer, perform the following steps before you begin working inside the computer.
1. Ensure that your work surface is flat and clean to prevent the computer cover from being scratched.
2. Turn off your computer (see Turning Off Your Computer).
CAUTION: To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from the network device.
3. Disconnect all network cables from the computer.
4. Disconnect your computer and all attached devices from their electrical outlets.
5. Press and hold the power button while the computer is unplugged to ground the system board.
6. Remove the cover.
5
CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to dissipate static electricity, which could harm internal components.

Turning Off Your Computer

CAUTION: To avoid losing data, save and close all open files and exit all open programs before you turn off your computer.
1. Shut down the operating system:
– In Windows 8:
* Using a touch-enabled device:
a. Swipe in from the right edge of the screen, opening the Charms menu and select Settings.
b. Select the and then select Shut down
* Using a mouse:
a. Point to upper-right corner of the screen and click Settings.
b. Click the and select Shut down.
– In Windows 7:
1. Click Start .
2. Click Shut Down.
or
1. Click Start .
2. Click the arrow in the lower-right corner of the Start menu as shown below, and then click Shut
.
Down.
2. Ensure that the computer and all attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut down your operating system, press and hold the power button for about 6 seconds to turn them off.

After Working Inside Your Computer

After you complete any replacement procedure, ensure you connect any external devices, cards, and cables before turning on your computer.
1. Replace the cover.
CAUTION: To connect a network cable, first plug the cable into the network device and then plug it into the computer.
2. Connect any telephone or network cables to your computer.
3. Connect your computer and all attached devices to their electrical outlets.
4. Turn on your computer.
5. If required, verify that the computer works correctly by running the Dell Diagnostics.
6

Removing and Installing Components

This section provides detailed information on how to remove or install the components from your computer.

Recommended Tools

The procedures in this document may require the following tools:
Small flat-blade screwdriver
Phillips screwdriver
Small plastic scribe

Removing The Cover

2
1. Follow the procedures in
2. Pull up the cover release latch, and lift the cover upwards to remove it from the computer.
Before Working Inside Your Computer
.

Installing The Cover

1. Place the cover on the computer.
2. Press down on the cover till it clicks into place.
3. Follow the procedures in
After Working Inside Your Computer
.
7

Removing The Intrusion Switch

1. Follow the procedures in
2. Remove the cover.
3. Press the clip inwards to release and gently pull the intrusion cable from system board.
Before Working Inside Your Computer
.
4. Slide the intrusion switch outward and remove it from the chassis.
8

Installing The Intrusion Switch

1. Slide the intrusion switch toward the chassis top and secure it to place.
2. Connect the intrusion cable to the system board.
3. Install the cover.
4. Follow the procedures in
After Working Inside Your Computer
.

Removing The Wireless Local Area Network (WLAN) Card

1. Follow the procedures in
2. Remove the cover.
3. Remove the screws that secure the antenna puck to the connector on the computer. Pull the antenna puck from the computer.
4. Lift the latch upwards. Lift and remove the WLAN card from the connector on the system board.
Before Working Inside Your Computer
.
9

Installing The WLAN Card

1. Insert the WLAN card into the connector on the system board and press down until it is securely in place. Fix the latch.
2. Place the antenna puck on the connector and tighten the screws that secure it to the computer.
3. Install the cover.
4. Follow the procedures in
After Working Inside Your Computer
.

Removing The Front Bezel

1. Follow the procedures in
2. Remove the cover.
3. Gently pry the front panel retention clips away from the chassis located at the side edge of front bezel.
Before Working Inside Your Computer
.
4. Rotate the front panel away from the chassis to release the hooks on the opposite edge of the panel.
10

Installing The Front Bezel

1. Insert the hooks along the bottom edge of the front panel into the slots on the chassis.
2. Rotate the bezel toward the computer to engage the four front panel retention clips until they click into place.
3. Install the cover.
4. Follow the procedures in
After Working Inside Your Computer
.

Removing The Expansion Card

1. Follow the procedures in
2. Remove the cover.
3. Lift the release tab on the card-retention latch upward.
Before Working Inside Your Computer
.
11
4. Press the release lever away from the expansion card and ease the card up and out of its connector.

Installing The Expansion Card

1. Insert the expansion card into the connector on the system board to secure it in place and press down the card retention latch downward.
2. Install the cover.
3. Follow the procedures in
After Working Inside Your Computer
.

Memory Module Guidelines

To ensure optimal performance of your computer, observe the following general guidelines when configuring your system memory:
Memory modules of different sizes can be mixed (for example, 2 GB and 4 GB). But, all populated channels must have identical configurations.
Memory modules must be installed beginning with the first socket.
12
NOTE: The memory sockets in your computer may be labeled differently depending on the hardware configuration. For example, A1, A2 or 1,2,3.
If the quad-rank memory modules are mixed with single or dual-rank modules, the quad-rank modules must be installed in the sockets with the white release levers.
If memory modules with different speeds are installed, they operate at the speed of the slowest installed memory modules.

Removing The Memory

1. Follow the procedures in
2. Remove the cover.
3. Press down on the memory retaining tabs on each side of the memory modules, and lift the memory modules out of the connectors on the system board.
Before Working Inside Your Computer
.

Installing The Memory

1. Align the notch on the memory-card with the tab in the system-board connector.
2. Insert the memory modules into the connectors on the system board. Install the memory in the order of 1 > 2 > 3 > 4.
3. Press down on the memory modules until the release tabs spring back to secure them in place.
4. Install the cover.
5. Follow the procedures in
After Working Inside Your Computer
.
13

Removing The Coin-Cell Battery

1. Follow the procedures in
2. Remove the
a) cover b) expansion card
3. Carefully press the release latch away from the battery. The battery pops out from the socket, lift the coin-cell battery out of the computer.
Before Working Inside Your Computer
.

Installing The Coin-Cell Battery

1. Place the coin cell battery into its slot on the system board.
2. Press the coin cell battery downward until the release latch springs back into place and secures it.
3. Install the expansion card.
4. Install the cover.
5. Follow the procedures in
After Working Inside Your Computer
.

Removing The Hard Drive

1. Follow the procedures in
2. Remove the cover.
14
Before Working Inside Your Computer
.
3. Remove the data cable and the power cable from the back of the hard drive.
4. Press the blue securing bracket inward and lift the hard drive bracket out of the bay in an angle.
15
5. Flex the hard drive bracket and then remove the hard drive from the bracket.
6. Repeat the preceding steps for the second hard drive, if available.

Installing The Hard Drive

1. Insert the hard drive into the hard-drive bracket.
2. Press both blue securing-bracket tabs inward and slide the hard drive bracket into the bay in the chassis.
3. Connect the data cable and the power cable to the hard drive.
4. Install the cover.
5. Follow the procedures in
After Working Inside Your Computer
.

Removing The Optical Drive

1. Follow the procedures in
2. Remove the
a) cover b) front bezel
16
Before Working Inside Your Computer
.
3. Remove the data cable and power cable from the back of the optical drive.
4. Lift up the optical-drive latch and then slide the optical drive towards the front of the computer.
17

Installing The Optical Drive

1. Push the optical drive from the front towards the back of the computer.
2. Connect the data cable and the power cable to the optical drive.
3. Install the front bezel.
4. Install the cover.
5. Follow the procedures in
After Working Inside Your Computer

Removing The Speaker

1. Follow the procedures in
2. Remove the cover.
3. Disconnect the speaker and unthread it.
Before Working Inside Your Computer
.
.
18
4. Press down the speaker-securing tab and slide the speaker upwards to remove it.

Installing The Speaker

1. Press the speaker-securing tab and slide the speaker downward to secure it.
2. Thread the speaker cable into the chassis clip.
3. Connect the speaker cable to the system board.
4. Install the cover.
5. Follow the procedures in
After Working Inside Your Computer
.

Removing The Power Supply Unit

1. Follow the procedures in
2. Remove the
a) cover b) hard drive c) optical drive
Before Working Inside Your Computer
.
19
3. Press the plastic clip and disconnect the 4–pin power cable from the system board.
4. Unthread the power cable from the chassis clips.
20
5. Press and lift the 24–pin cable to disconnect it from the system board.
6. Unthread the 24–pin power cable from the chassis clip.
21
+ 46 hidden pages