Short Form Specifications
Exterior top is constructed of one-piece 16-gauge stainless steel, with integral 2.12" (5.4cm) high square nosing at the front, and 4" (10.2cm) high by
2" (5.1cm) deep backsplash at the rear. Top has opening for use with 1/6
size pans. Pans and adapter bars supplied by others. Pans are recessed 3”
(7.6cm) or 2” (5.1cm) and rest on adjustable pan supports. Pan opening
has 20-gauge stainless steel removable cover. Temperature in top opening maintains 33°F (1°C) to 41°F (5°C), with pans recessed 3” (7.6cm),
at 86°F ambient room temperature, meeting NSF7 requirements.
Exterior back and bottom are 24-gauge galvanized steel. Exterior ends are
18-gauge galvanized steel.
Base interior has 22-gauge stainless steel back and bottom. Interior ends
and door frames are thermoformed ABS plastic. Base is insulated with 1.5"
(3.8cm) of high-density foamed-in-place polyurethane.
Door(s) have a 22-gauge stainless steel exterior front, with a thermoformed ABS plastic interior liner. Door(s) have a black recessed handle and
a snap-in magnetic gasket which is easily replaceable.
Base has a machine compartment, standard on the right, condensing unit
with condensate evaporator and an electrical junction box installed.
Machine compartment has a louver for access to condensing unit. Blower
coil(s) are located behind the door mullions, and refrigerate the cabinet.
Refrigeration system uses HFC-404A refrigerant, and maintains 36°F (2°C)
to 40°F (4°C) interior cabinet temperature in the base.
Unit is mounted on 6.13" (15.6cm) high adjustable stainless steel legs.
Electrical connections are 115 volts, 60 Hertz, single phase. Unit has a
8' (2.4m) long cord and plug.
Optional Accessories & Modifications
906A Stainless steel end
505H Stainless steel back
505F Laminate facing (full front)
906E Laminate end
905A Laminate back
1030F Cutting board (Sanalite or composite)
107A Tray rack
1027A Casters
102 Drawers
A-(2) 19” in lieu of one door
B-(2) 27” in lieu of one door
C-(2) 32” in lieu of one door
108 Locks
120F Cold pan drain
213 *220V/50 cycle
*Inclusion of this option will alter the
electrical specifications of the unit
Model F18MC39D
31.5” (80cm) Deep Self-Contained Mega Top Salad Tables
The Delfield Company, P.O. Box 470, Mt Pleasant, MI 48804-0470, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2001 The Delfield Company.All rights reserved. Printed in U.S.A.
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
F18MC