Delfield F18FR35 User Manual
F18FR
31.50” (80cm) Deep Remote Freezer Base Work Tables
Models
• F18FR35 - 35” remote freezer work table
• F18FR50 - 50” remote freezer work table
• F18FR58 - 58” remote freezer work table
• F18FR66 - 66” remote freezer work table
• F18FR76 - 76” remote freezer work table
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
F18FR: 31.50” (80cm) Deep Remote Freezer Base Work Tables
F18FR66
Specifications
Exterior Top to be constructed of one piece 16-gauge stainless
steel, with integral 2.12” (5.4cm) square nosing on front and 4”
(10.2cm) high by 2” (5.1cm) thick backsplash on rear. Top to be
insulated with 2” (5.1cm) high density insulation.
Base interior to have 22-gauge stainless steel back and
bottom. Interior ends and door frames to be thermoformed
ABS plastic. Base to be insulated with 1.50” (3.8cm) high
density environmentally friendly, Kyoto Protocol Compliant,
Non ODP (Ozone Depletion Potential), Non GWP (Global
Warming Potential) foamed in place polyurethane.
Exterior back and bottom of base to be 24-gauge galvanized
steel. Exterior ends to be constructed of 18-gauge galvanized
steel.
Door(s) have a thermoformed ABS plastic interior liner and
22 gauge stainless steel exterior front. Door(s) have black
recessed handle(s) and a snap-in magnetic gasket which is
easily replaceable. Unit to be furnished with (1) epoxy coated
wire shelf for each door section.
Base to be furnished with blower coil with coil housing to
enclose expansion valve and fans. Unit is provided with defrost
Standard Features
• Standard heavy duty units have unfinished
ends
• 16-gauge stainless steel top construction
• Interior sub-top is made of stainless steel
• 2BF stainless steel refrigerated base interior
back and bottom
• High density environmentally friendly,
Kyoto Protocol Compliant, Non ODP (Ozone
Depletion Potential), Non GWP (Global
Warming Potential) polyurethane foam
insulation
• Freezer base fronts are made of .095” thick ABS
plastic backed by rigid polyurethane water
blown injection molded frames. (NO WOOD)
• One epoxy coated shelf for each door
• Exterior drawer fronts are stainless steel with
ABS plastic liner
• Snap-in dart style vinyl magnetic gasket
• Recessed black plastic handles held in with a
positive lock system
• 14-gauge leg rails that run the entire length
• 6.12” adjustable stainless steel legs and bullet
feet
• Environmentally friendly HFC-404A refrigerant
• Interior cabinet is cooled with mullion style
evaporator blower coils (coated) mounted
timer, thermostat and solenoid valve in mechanical section.
Unit is designed to maintain 0°F (-18°C) to -5°F (21°C).
Unit is mounted on 6.13” (15.6cm) high adjustable stainless
steel legs.
Recommended refrigerant - HFC-404A
Electrical connections are 115 volt, 60 Hertz, single phase.
Unit must be hard wired.
• Interior freezer base cabinet will
• One year parts and 90 day labor
Options &
Accessories
• Electric condensate evaporators
• Stainless steel end or back
• Laminate facing (full front)
• Laminate end or back
• Cutting board
• Condensate evaporator (1 per coil)
• Tray rack
• Drawers in lieu of one door, 19”, 27”
• Locks
• 230V/50 cycle*
* Inclusion of this option will alter the
between each door/drawer section for
very even air and temperature control
maintain 0° to -5° temperatures at 100°
ambient room temperature. Supplied
standard with defrost timer
standard warranty
or 32”
electrical specifications
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Plan View
All Models
31.50”
[80cm]
35.00" [89cm]
19.00" (48cm)
Freezer
16.00"
[41cm]
Panel
Elevation View
F18FR35
50.00" [127cm]
19.00" (48cm)
Freezer
Elevation View
F18FR50
19.00" (48cm)
Freezer
6" (15cm) Panel
6" (15cm) Panel
19.00" (48cm)
Freezer
Elevation View
58.00" [147cm]
27.00" (69cm)
Freezer
6" (15cm) Panel
F18FR58
6" (15cm) Panel
27.00" (69cm)
Freezer
Elevation View
36.00"
[91cm]
26.31"
[67cm]
[19cm]
66.00" [168cm]
27.00" (69cm)
6" (15cm) Panel
F18FR66
7.62"
6.13"
[16cm]
Freezer
31.50"
[80cm]
End View
All Models
6" (15cm) Panel
40.00"
[102cm]
32.00" (81cm)
Freezer
19.00" [48cm] Door
76.00" [193cm]
32.00" (81cm)
Freezer
6" (15cm) Panel
Elevation View
F18FR76
17.00"
[43cm]
Clearance
6" (15cm) Panel
25.00"
[64cm]
Clearance
27.00" [69cm] Door
Mechanical Data
16" [40.6cm]
Elevation View
6.00" [15cm]
Elevation View
F18FR50, F18FR58,
F18FR66, F18FR76
J = Junction box
R = Refrigeration lines
1/4" liquid, 3/8" suction
D = Drains 1/2"
R D
J
F18FR35
R
J
32.00" [81cm] Door
D
31.50"
[80cm]
30.00"
[76cm]
Clearance
31.50” (80cm) Deep Remote Freezer Base Work Tables
Specifications
Model Number
Of Doors
Storage
3
ft
Shelf
Area ft
H.P. V/Hz/Ph Amps Ship Weight
2
BTU Load Evap Cap.
lbs/kg
F18FR35 (1) 19” 5.58 2.56 1/3* 115/60/1 10.0 310/140 943 160
F18FR50 (2) 19” 12.21 5.12 1/2* 115/60/1 10.0 370/168 1471 160
F18FR58 19” & 27” 15.00 6.51 3/4* 115/60/1 10.0 400/181 1844 160
F18FR66 (2) 27” 17.79 7.90 3/4* 115/60/1 10.0 425/193 2020 160
F18FR76 (2) 32” 21.28 9.64 3/4* 115/60/1 10.0 450/204 2437 160
*Recommended horsepower, compressor not supplied on remote units
F18FR
Deleld reserves the right to make changes to the design or specications without prior notice.
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Printed in the U.S.A.
DSF18FR
08/11
BTU/°TD
Loading...