Delfield F18FR35 General Manual

¤
31.5” (80cm) Deep Remote Freezer Base Work Tables
Short Form Specifications
Exterior Top to be constructed of one piece 16-gauge stainless steel, with integral 2.12” (5.4cm) square nosing on front and 4” (10.2cm) high by 2” (5.1cm) thick backsplash on rear. Top to be insulated with 2” (5.1cm) high density insulation.
Base interior to have 22-gauge stainless steel back and bottom. Interior ends and door frames to be thermoformed ABS plastic. Base to be insulated with 1.50” (3.8cm) high density foamed in place polyurethane.
Exterior back and bottom of base to be 24-gauge galvanized steel. Exterior ends to be constructed of 18-gauge galvanized steel.
Door(s) have a thermoformed ABS plastic interior liner and 22 gauge stainless steel exterior front. Door(s) have black recessed handle(s) and a snap-in magnetic gasket which is easily replace­able. Unit to be furnished with (1) epoxy coated wire shelf for each door section.
Base to be furnished with blower coil with coil housing to enclose expansion valve and fans. Unit is provided with defrost timer, ther­mostat and solenoid valve in mechanical section. Unit is designed to maintain 0°F (-18°C) to -5°F (21°C).
Unit is mounted on 6.13” (15.6cm) high adjustable stainless steel legs.
Refrigeration System Components— HFC-404A Electrical connections are 115 volt, 60 Her tz, single phase.
Unit must be hard wired.
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
F18FR
Model F18FR66
Optional Accessories & Modifications
906A Stainless steel end 505H Stainless steel back 505F Laminate facing (full front) 906E Laminate end 905A Laminate back 1030A Cutting board (.5” x 10” composite) 107F Tray rack 102 Drawers
A-(2) 19” in lieu of one door B-(2) 27” in lieu of one door C-(2) 32” in lieu of one door E-(3) 19”, 27” or 32” in lieu of one door
108 Locks 213 *220V/50 cycle
* Inclusion of this option will alter the
electrical specifications of the unit
The Delfield Co mp a n y, P. O . B o x 470, M t P l e a s a nt, M I 4 8 8 0 4 - 0 470, U . S.A. • ( 8 0 0 ) 733-8821 • F a x ( 8 0 0 ) 6 6 9 - 0 6 1 9 • www. de l field.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2001 The Delfield Company. All rights reserved. Printed in U.S.A.
19" (48.3cm)
FREEZER
35" [88.9cm]
50" [127cm]
66" [167.64cm]
58" [147.32cm]
VARIES
76" [193.04cm]
19" (48.3cm)
FREEZER
19" (48.3cm)
FREEZER
19" (48.3cm)
FREEZER
27" (68.6cm)
FREEZER
31.5"
[80cm]
6" [15.2cm]
30"
[76.2cm]
CLEARANCE
27" (68.6cm)
FREEZER
27" (68.6cm)
FREEZER
32" (81.3cm)
FREEZER
32" (81.3cm)
FREEZER
25"
[63.5cm]
CLEARANCE
17"
[43.1cm]
CLEARANCE
6" [15.2cm]
6"
[15.2cm]
6"
[15.2cm]
6"
[15.2cm]
6"
[15.2cm]
6"
[15.2cm]
ELEVATION VIEW
F18FR35
ELEVATION VIEW
F18FR50
ELEVATION VIEW
F18FR58
ELEVATION VIEW
F18FR66
END VIEW
ALL MODELS
19" [48.3cm]
DOOR
27" [68.6cm]
DOOR
32" [81.3cm]
DOOR
ELEVATION VIEW
F18FR76
PLAN VIEW
ALL MODELS
35" [88.9cm]
50" [137cm]
58" [147.3cm]
66" [167.6cm]
76" [193cm]
16" [40.6cm]
6" [15.2cm]
31.5"
[80cm]
J
J = Junction box R = Refrigeration lines 1/4" liquid, 3/8" suction D = Drains 1/2"
J
MECHANICAL DATA
26.31"
[66.8cm]
29"
[73.4cm]
24"
[61cm]
21.8"
[55.4cm]
36"
[91.4cm]
7.62" [19.4 cm]
6.13" [15.6cm]
31.5"
[80cm]
R D
R
D
40"
[101.6cm]
6" (15.2CM) FRONT PANEL
10" (25.4CM) FRONT PANEL
F18FR
31.5” (80cm) Deep Remote Freezer Base Work Tables
Mechanical Data–Standard Unit
NUMBER DOORS CU. FT. SQ. FT. LOAD BTU/°TD H.P.* PHASE AMPS LBS / KG
F18FR35
F18FR50
F18FR58
F18FR66
F18FR76
*Recommended horsepower
MODEL NUMBER OF STORAGE SHELF AREA BTU EVAP. CAPACITY VOLTS/HERTZ/ SHIP WEIGHT
(1) 19” 5.58 2.56 943 160 1/3 115/60/1
(2) 19” 12.21 5.12 1471 160 1/2 115/60/1
19” & 27” 15.00 6.51 1844 160 3/4 115/60/1
(2) 27” 17.79 7.90 2020 160 3/4 115/60/1
(2) 32” 21.28 9.64 2437 160 3/4 115/60/1
The Delfield Co mp a n y, P. O . B o x 470, M t P l e a s a nt, M I 4 8 8 0 4 - 0 470, U . S.A. • ( 8 0 0 ) 733-8821 • F a x ( 8 0 0 ) 6 6 9 - 0 6 1 9 • www. de l field.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2001 The Delfield Company. All rights reserved. Printed in U.S.A.
DS18FR 07/01
10.0 310/140
10.0
10.0
10.0
10.0
370/168
400/181
425/193
450/204
Loading...