Delfield F18FR General Manual
PROJECT
ITEM #
QUANTITY |
|
DATE |
APPROVAL
F18FR
31.5” (80cm) Deep Remote Freezer Base Work Tables
Short Form Specifications
Exterior Top to be constructed of one piece 16-gauge stainless steel, with integral 2.12” (5.4cm) square nosing on front and 4” (10.2cm) high by 2” (5.1cm) thick backsplash on rear. Top to be insulated with 2” (5.1cm) high density insulation.
Base interior to have 22-gauge stainless steel back and bottom. Interior ends and door frames to be thermoformed ABS plastic. Base to be insulated with 1.50” (3.8cm) high density foamed in place polyurethane.
Exterior back and bottom of base to be 24-gauge galvanized steel. Exterior ends to be constructed of 18-gauge galvanized steel.
Door(s) have a thermoformed ABS plastic interior liner and 22 gauge stainless steel exterior front. Door(s) have black recessed handle(s) and a snap-in magnetic gasket which is easily replaceable. Unit to be furnished with (1) epoxy coated wire shelf for each door section.
Base to be furnished with blower coil with coil housing to enclose expansion valve and fans. Unit is provided with defrost timer, thermostat and solenoid valve in mechanical section. Unit is designed to maintain 0°F (-18°C) to -5°F (21°C).
Unit is mounted on 6.13” (15.6cm) high adjustable stainless steel legs.
Refrigeration System Components— HFC-404A
Electrical connections are 115 volt, 60 Hertz, single phase. Unit must be hard wired.
Model F18FR66
Optional Accessories & Modifications
906A Stainless steel end
505H Stainless steel back
505F Laminate facing (full front)
906E Laminate end
905A Laminate back
1030A Cutting board (.5” x 10” composite) 107F Tray rack
102 Drawers
A-(2) 19” in lieu of one door
B-(2) 27” in lieu of one door
C-(2) 32” in lieu of one door
E-(3) 19”, 27” or 32” in lieu of one door 108 Locks
213 *220V/50 cycle
*Inclusion of this option will alter the
electrical specifications of the unit
The Delfield Company, P.O. Box 470, Mt Pleasant, MI 48804-0470, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com Delfield reserves the right to make changes in design or specifications without prior notice. ©2001 The Delfield Company. All rights reserved. Printed in U.S.A.
35" [88.9cm]
|
|
|
|
|
<![if ! IE]> <![endif]>10".PANEL(254CM)FRONT |
<![if ! IE]> <![endif]>6".PANEL(152CM)FRONT |
|
|
FREEZER |
||||||
19" (48.3cm) |
|
|
|
||||
|
|
|
|
|
|
|
|
ELEVATION VIEW
F18FR35
|
|
|
|
F18FR |
|
|
31.5” (80cm) Deep Remote Freezer Base Work Tables |
||
|
50" [127cm] |
58" [147.32cm] |
|
|
|
|
|
|
VARIES |
|
|
|
|
31.5" |
19" (48.3cm) 19" (48.3cm) |
19" (48.3cm) |
27" (68.6cm) |
[80cm] |
|
FREEZER |
FREEZER |
FREEZER |
FREEZER |
|
|
6" |
6" |
6" |
|
|
[15.2cm] |
|
||
|
[15.2cm] |
|
[15.2cm] |
|
ELEVATION VIEW |
ELEVATION VIEW |
PLAN VIEW |
||
|
F18FR50 |
|
F18FR58 |
ALL MODELS |
66" [167.64cm] |
76" [193.04cm] |
27" (68.6cm) |
27" (68.6cm) |
|
32" (81.3cm) |
32" (81.3cm) |
FREEZER |
FREEZER |
|
FREEZER |
FREEZER |
|
|
6" |
|
|
|
6" [15.2cm] |
[15.2cm] |
|
6" [15.2cm] |
ELEVATION VIEW |
ELEVATION VIEW |
F18FR66 |
F18FR76 |
|
31.5" |
|
[80cm] |
|
29" |
|
[73.4cm] |
|
|
|
24" |
|
|
|
|
[61cm] |
|
36" |
26.31" |
21.8" |
40" |
|
[66.8cm] |
[55.4cm] |
[101.6cm] |
||
[91.4cm] |
|
|||
7.62" [19.4 cm] |
17" |
|||
[43.1cm] |
||||
|
|
|
||
|
|
6.13" [15.6cm] |
CLEARANCE |
|
|
|
|
||
END VIEW |
19" [48.3cm] |
ALL MODELS |
DOOR |
|
MECHANICAL DATA |
|
||
|
35" [88.9cm] |
|
|
|
|
R |
16" [40.6cm] |
|
|
|
D |
|
|
|
|
|
J = Junction box |
|
|
|
J |
R = Refrigeration lines |
||
|
|
1/4" liquid, 3/8" suction |
||
|
|
D = Drains 1/2" |
|
|
6" |
76" [193cm] |
|
|
|
66" [167.6cm] |
|
|
||
[15.2cm] |
|
|
||
|
|
58" [147.3cm] |
|
|
|
|
50" [137cm] |
|
|
|
|
6" [15.2cm] |
|
|
|
|
R |
D |
|
|
|
|
J |
31.5" |
|
|
|
[80cm] |
|
25" |
30" |
[76.2cm] |
|
[63.5cm] |
CLEARANCE |
CLEARANCE |
|
27" [68.6cm] |
32" [81.3cm] |
DOOR |
DOOR |
Mechanical Data–Standard Unit
MODEL NUMBER OF STORAGE SHELF AREA BTU EVAP. CAPACITY VOLTS/HERTZ/ SHIP WEIGHT
NUMBER DOORS CU. FT.SQ. FT. LOAD BTU/°TD H.P.*PHASE AMPS LBS / KG
F18FR35 (1) 19” 5.58 2.56 943 160 1/3 115/60/1 10.0 310/140
F18FR50 (2) 19” 12.21 5.12 1471 160 1/2 115/60/1 10.0 370/168
F18FR58 19” & 27” 15.00 6.51 1844 160 3/4 115/60/1 10.0 400/181
F18FR66 (2) 27” 17.79 7.90 2020 160 3/4 115/60/1 10.0 425/193
F18FR76 (2) 32” 21.28 9.64 2437 160 3/4 115/60/1 10.0 450/204
*Recommended horsepower
The Delfield Company, P.O. Box 470, Mt Pleasant, MI 48804-0470, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com Delfield reserves the right to make changes in design or specifications without prior notice. ©2001 The Delfield Company. All rights reserved. Printed in U.S.A.
DS18FR 07/01
Loading...