|
Project ___________________________________ |
|
|
Item _____________________________________ |
|
Concepts™ Serving Systems |
Quantity _ ________________________________ |
|
CSI Section 11400 |
||
|
||
Self-Contained LiquiTec® Cold Pan Serving Counter |
Approved _ _______________________________ |
|
Date _____________________________________ |
||
|
||
|
|
Models
•DC-L2 Self-contained LiquiTec® cold pan serving counter, fits two standard 12”x20” pans
•DC-L3 Self-contained LiquiTec® cold pan serving counter, fits three standard 12”x20” pans
•DC-L4 Self-contained LiquiTec® cold pan serving counter, fits four standard 12”x20” pans
•DC-L5 Self-contained LiquiTec® cold pan serving counter, fits five standard 12”x20” pans
•DC-L6 Self-contained LiquiTec® cold pan serving counter, fits six standard 12”x20” pans
|
Standard Features |
|
|||||
|
• Heavy duty stainless steel top |
|
|||||
|
• Reinforced |
stainless steel front and rear |
|||||
|
|
removable panels |
|
|
|
||
|
• Heavy duty base support structure |
||||||
|
• Standard on 6” legs |
|
|
|
|||
|
• |
Flush mounted pans |
|
|
|||
|
• Individual 0.5” stainless steel drains |
||||||
|
• Thermostat for temperature control |
||||||
|
• High |
density |
foamed in place |
||||
|
|
environmentally friendly, |
Kyoto |
Protocol |
|||
|
|
Compliant, Non ODP (Ozone Depletion |
|||||
|
|
Potential), Non GWP (Global Warming |
|||||
|
|
Potential) |
polyurethane |
keeps energy |
|||
|
|
costs low |
|
|
|
|
|
DC-L4 |
• Must be hard wired in field |
|
|||||
• |
One |
year |
parts |
and |
labor |
standard |
|
|
|
warranty |
|
|
|
|
Options &
Accessories
•Custom lengths available per inch
•Granite, Hanstone and Solid Surface top materials
•Laminated base panels
•Finished stainless steel or laminated end panels
•Décor panels
•Graphics packages
•FlexiShield® foodshields
•Signage with overstructures, lights and heatlamps
•Refrigerated base inserts
•Heated base inserts
•Dry storage base inserts
•Mechanical access doors
•Casters (stand alone units only)
•Kickplates (units with legs only)
•Tray slides
•Adapter plates and bars
•Remote refrigerant (specify refrigerant)
•220v/50 cycle*
*Inclusion of this option will alter electrical specifications of the unit
Specifications
Exterior body is constructed of 0.75” Melamine reinforced front and rear panels with 22 gauge stainless steel skin and 1” polyethylene horizontal rib supports. Horizontal brace on rear is constructed of 18 gauge galvanized steel. The exterior ends are unfinished.
Exterior top is constructed of 14 gauge stainless steel. Horizontal top supports on front and rear are constructed with 18 gauge galvanized steel.
Interior base bottom is constructed of 16 gauge galvanized steel. Vertical base support braces are 14 gauge galvanized steel. Top end supports are 12 gauge stainless steel.
The LiquiTec® cold pan has 2-6 die stamped 19.87” x 11.87” (50.5cm x 30.2cm) openings with depressed edges. Formed well below each opening is 6.25” (15.9cm) deep with 0.5” drain manifold to gate valve. Each well, flush with the top, for flush mount pans to accommodate 12” x 20” (30.5cm x 50.8cm) pans 4” (7.6cm) or 6” (15.2cm) deep, supplied by others. Product temperatures of 33˚F (1˚C) to 41˚F (5˚C) are maintained at 86˚F (30˚C) ambient room temperature, meeting NSF7
requirements. The cold pan is separated from the exterior top by a thermal break. Copper refrigeration tubing is attached to the sides of every well. Eutectic fluid is used as the heat transfer medium. Cold pan is fully insulated with foamed in place polyurethane insulation. Cold pans are equipped with a 0.5” stainless steel drain plumbed to the drain valve located behind the hinged louvered door.
Refrigeration system uses HFC-404A refrigerant and has a self-contained 115 volt, 60 Hertz, single phase hermetically sealed condensing unit with adjustable cold pan thermostat control.
Legs: Bases mounted on 6.12” adjustable legs.
980 S. Isabella Rd. |
Phone: 800-733-8948 or 989-773-7981 |
www.delfield.com |
|
Mt. Pleasant, Michigan 48858 |
|||
Fax: 800-669-0619 |
|||
|
|
||
|
|
|
<![endif]>Counter Serving Pan Cold LiquiTec® Contained-Self Systems: Serving Concepts™
<![endif]>Counter
<![if ! IE]><![endif]>Concepts™ Serving Systems Self-Contained LiquiTec® Cold Pan Serving
38.00 |
52.00 |
66.00 |
[97cm] |
[132cm] |
[168cm] |
36.00 |
36.00 |
36.00 |
[91cm] |
[91cm] |
[91cm] |
DC-L2 Plan View |
DC-L3 Plan View |
DC-L4 Plan View |
DC-L2 Elevation View |
DC-L3 Elevation View |
DC-L4 Elevation View |
80.00 |
|
94.00 |
[203cm] |
|
[239cm] |
|
36.00 |
36.00 |
|
[91cm] |
[91cm] |
DC-L5 Plan View
DC-L5 Elevation View
DC-L6 Plan View
DC-L6 Elevation View
|
|
|
|
|
|
36.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
[91cm] |
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6.12 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[16cm] |
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
All Models Right Side View |
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Model |
Length |
Depth |
Height |
# of 12”x20” |
H.P. |
V/Hz/Ph |
|
Amps |
|
BTU |
|
|
|
Ship Weight |
|||||||||
Pans Held |
|
|
|
|
|
||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DC-L2 |
38.00” |
36.00” |
36.00” |
2 |
1/4 |
115/60/1 |
|
7.0 |
|
|
|
|
379 |
|
|
|
342lbs/155kg |
||||||
DC-L3 |
52.00” |
36.00” |
36.00” |
3 |
1/4 |
115/60/1 |
|
7.0 |
|
|
|
|
569 |
|
|
|
468lbs/212kg |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DC-L4 |
66.00” |
36.00” |
36.00” |
4 |
1/4 |
115/60/1 |
|
7.0 |
|
|
|
|
758 |
|
|
|
594lbs/269kg |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DC-L5 |
80.00” |
36.00” |
36.00” |
5 |
1/4 |
115/60/1 |
|
7.0 |
|
|
|
|
948 |
|
|
|
720lbs/327kg |
||||||
DC-L6 |
94.00” |
36.00” |
36.00” |
6 |
1/4 |
115/60/1 |
|
7.0 |
|
|
|
|
1138 |
|
|
|
846lbs/384kg |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Delfield reserves the right to make changes to the design or specifications without prior notice.
980 S. Isabella Rd. |
Phone: 800-733-8948 or 989-773-7981 |
Printed in the U.S.A. |
Mt. Pleasant, Michigan 48858 |
Fax: 800-669-0619 |
DSDCL |
|
www.delfield.com |
03/10 |
|
|
|