GUIDE D’INSTALLATION ET D’UTILISATION
FR - Table de cuisson
GUIDE FOR INSTALLATION AND USE
GB - Cooking Hob
MANUALE D’INSTALLAZIONE ED UTILIZZO
IT - Piano di Cottura
INSTALAýNÍ A UŽIVATELSKÁ PěÍRUýKA
CZ - Varná deska
MANUAL DE INSTALACIÓN Y UTILIZACIÓN
ES - Placa de cocción
GUIA DE INSTALAÇÃO E DE UTILIZAÇÃO
PT - Placa de cozinha
INSTALLATIONS- OG BRUGERVEJLEDNING
DK - Kogeplade
SZERELÉSI ÉS HASZNÁLATI UTASÍTÁS
HU - FĘzĘlap
GB
Dear Customer,
You have just acquired a DE DIETRICH hob and we would like to thank you.
Our research teams have created a new generation of appliances for you. Their quality,
design, features and technological advances make them exceptional products and
reveal our unique know-how.
Your new DE DIETRICH hob will blend harmoniously into your kitchen and perfectly
combine cooking performance and ease of use. Our wish was to offer you a product of
excellence.
In the line of DE DIETRICH products, you will also find a wide range of ovens, microwave
ovens, ventilation hoods, dishwashers, and refrigerators, all of which can be integrated
and all of which can be coordinated with your new DE DIETRICH hob.
Of course, in an ongoing effort to better satisfy your demands with regard to our products,
our after-sales service department is at your disposal and ready to listen in order to
respond to all of your questions and suggestions (contact information at the end of this
booklet).
We also encourage you to visit our Web site www.dedietrich-electromenager.com
where you will find our latest innovations as well as useful and complementary
information.
DE DIETRICH
The New Items of Value
As part of our commitment to constantly improving our products, we reserve the right to make changes to
them based on advances to their technical, functional and/or esthetic properties.
Before installing and using your appliance, please carefully read this Guide for
Installation and Use, which will allow you to quickly familiarise yourself with its
operation.
www.dedietrich-electromenager.com
1
TABLE OF CONTENTS
GENERAL NOTICE pag.4
-
INSTRUCTION FOR THE USER pag.5
Using the burners pag.5
Electric plate use pag.5
Cleaning pag.6
INSTRUCTION FOR THE INSTALLER pag.7
Installing the top pag.7
Fastening the top pag.7
Installation room pag.7
Gas connection pag.8
Electric connection pag.8
Replacing the nozzles pag.8
Adjusting the burners pag.8
Replacing the power supply cable pag.9
MODEL pag.10
-
TECHNICAL CHARACTERISTIC TABLES pag.11
-
AFTER SALES SERVICE pag.12
-
2
GENERAL NOTICE
It is very important that you keep this booklet together with the equipment for any future
consultation.
If this equipment should be sold or transferred to another person, make sure that the new
user receives the booklet, so that he can learn how to operate the appliance and read the
corresponding notice.
This is a Class 3 appliance.
This appliance complies with the following Directives:
EEC 90/396 (Gas) EEC 89/336 (Electromagnetic Compatibility)
2006/95/CE (Low Voltage) EEC 89/109 (Contact with foods)
The installation must be carried out by experienced and qualified personnel, in conformity with the
regulations in force.
This equipment has been designed to be used by adults.
Therefore, make sure that children do not go near the equipment to play with it.
While the appliance is running, watch the children and make sure they neither stay near the equipment,
nor touch the surfaces that have not cooled down completely.
Before powering the equipment, check that it is properly adjusted for the type of gas at disposal (see the
“installation” paragraph).
Before carrying out the maintenance or cleaning the equipment, cut power supply off and make it cool
down.
Make sure that air circulates around the gas equipment. Insufficient ventilation produces a lack of oxygen.
In case of an intense or prolonged use of the equipment, it may be necessary to improve aeration, for
example by opening a window or increasing the mechanical suction power, if it exists.
The products of combustion must be discharged outside through a suction hood or an electric fan (see the
“installation” paragraph).
For any possible operation or modification, apply to an authorized Technical Assistance Centre and
demand original spare parts.
The product label, with the serial number, is sticked under the hob.
The manufacturer refuses all responsibility for possible damages to things or people, resulting
from a wrong installation or from an improper, incorrect or unreasonable use of this equipment.
3
INSTRUCTIONS FOR THE USER
It is necessary that all the operations regarding the installation, adjustment and
adaptation to the type of gas available are carried out by qualified personnel, in
conformity with the regulations in force.
The specific instructions are described in the booklet section intended for the
installer.
USING THE BURNERS
The symbols silk-screen printed on the side of the
knob indicate the correspondence between the
knob and the burner.
Automatic start-up with valves
Turn the corresponding knob anticlockwise up
to the maximum position (large flame, fig. 1) and
press the knob.
Once the burner has
been started up, keep
the knob pressed for
about 6 seconds.
Using the burners
In order to obtain the
maximum yield without
Fig.1
of the pot is suitable for the burner potential (see
the following table), so as to avoid that the flame
goes out of the pot bottom (fig. 2).
waste of gas, it is
important that the diameter
knob clockwise up to the closing position.
If there is no power supply, it is possible to light the
burners with matches, setting the knob to the startup point (large flame, fig. 1).
BURNERS Power W Ø of pots
Auxiliary
Semi-rapid
Rapid
Triple crown
Notice
When the equipment is not working, always check
that the knobs are in the closing position (see
fig.1).
If the flame should blow out accidentally, the safety
valve will automatically stop the gas supply, after a
few seconds. To restore operation, set the knob to
the lighting point (large flame, fig. 1) and press.
While cooking with fat or oil, pay the utmost
attention as these substances can catch fire when
overheated.
Do not use sprays near the appliance in operation.
Do not place unstable or deformed pots on the
burner, so as to prevent them from overturning or
overflowing.
Make sure that pot handles are placed properly.
When the burner is started up, check that the
flameis regular and, before taking pots away,
always lowerthe flame or put it out.
1000 10 - 14 cm
1750 16 - 18 cm
3000 20 - 22 cm
3800 24 - 26 cm
Fig.2
Use the maximum capacity to quickly make the
liquids reach the boiling temperature, and the
reduced capacity to heat food or maintain boiling.
All of the operating positions must be chosen
between the maximum and the minimum ones,
never between the minimum position and the
closing point.
Use the maximum capacity to quickly make the
liquids reach the boiling temperature, and the
reduced capacity to heat food or maintain boiling.
All of the operating positions must be chosen
between the maximum and the minimum ones,
never between the minimum position and the
closing point.
The gas supply can be interrupted by turning the
ELECTRIC PLATE USE
The electric-plate is operated with a seven position
switch and to turn the electric-plate on, rotate the
switch to any of the positions shown.
The red light is switched on when the electric-plate
is in operation.
Below as indicative basis, the settings to be used
for operating the electric-plate.
Warning
Use only flat pans and with sufficiently thick base,
equal or not much superior than that of the plate.
Do not switch the electric plate without the pan
over the plate.
Do not cook any food on the plate surface.
Turn off the plate few minutes before the cooking
end.
4
INSTRUCTIONS FOR THE USER
After use the electric plate remains very hot for
a prolonged period of time, do not tuch it and do
not place any object on top of the plate.
For a good preservation, the electric plate must
be thoroughly cleaned with appropriate cleaning
products which are readly available.
NB.: When operating for the first time, it is
necessary to eliminate any humidity or oil
which may accumulated around the electric
elements of the plate by operating the electric
plate on its lowest setting (1) for about 30
minutes.
KNOB
SETTING
0Off
1 Very low To heat small quantities of liquids.
2 Low
3 Mild To defrost frozen foods, cook stews, at to below boiling point.
4 Medium For foods which require boiling point, delicate meat and fi sh.
5 Strong For roasting, grilling, stews.
6 Very strong To boil large quantities of liquid, to fry.
HEAT TYPE OF COOKING
Heating medium quantities of liquid, to prepare sauces and
creams requiring long cooking.
CLEANING
Before any operation, disconnect the appliance
from the electric grid.
It is advisable to clean the appliance when it is
cold.
Enamelled parts
The enamelled parts must be washed with a
sponge and soapy water or with a light detergent.
Do not use abrasive or corrosive products.
Do not leave substances, such as lemon or tomato
juice, salt water, vinegar, coffee and milk on the
enamelled surfaces for a long time.
Stainless steel an alluminum parts
Stainless steel can be stained if it remains in
contact with highly calcareous water or aggressive
detergents for an extended period of time.
The stainless steel parts should also be cleaned
with soapy water and then dried with a soft cloth.
Burners and racks
These parts can be removed to make cleaning
easier.
The burners must be washed with a sponge and
soapy water or with a light detergent, wiped well
and placed in their housing perfectly.
Make sure that the flame-dividing ducts are not
clogged.
Check that the feeler of the safety valve and the
start-up electrode are always perfectly cleaned, so
as to ensure an optimum operation.
The racks can be washed in the dishwasher.
Gas taps
The possible lubrication of the taps must be carried
out by specialized personnel, exclusively.
In case of hardening or malfunctions in the gas
taps, apply to the Customer Service.
5
INSTRUCTIONS FOR THE INSTALLER
IMPORTANT NOTICE:
THE OPERATIONS INDICATED BELOW MUST BE FOLLOWED BY QUALIFIED
PERSONNEL EXCLUSIVELY, IN CONFORMITY WITH THE REGULATIONS IN FORCE.
THE MANUFACTURING FIRM REFUSES ALL RESPONSIBILITY FOR DAMAGES TO
PEOPLE, ANIMALS OR THINGS, RESULTING FROM THE FAILURE TO COMPLY WITH
SUCH PROVISIONS.
INSTALLATION
Installing the top
The appliance is designed to be embedded into
heat-resistant pieces of furniture.
The walls of the pieces of furniture must resist a
temperature of 75°C besides the room one.
The gas hobs are equipped with type X degree
protection against overheating. Therefore,
the appliance can be installed next to cabinets,
provided the height of the cabinet doses not
exceed that of the hob.
The equipment must not be installed near
inflammable materials, such as curtains, cloths,
etc.
Make a hole in the top of the piece of furniture, with
the dimensions indicated in fig. 3, at a distance of
at least 50 mm from
the appliance border
to the adjacent
walls.
If the hob is going
to be installed on
the top of an oven,
precautions must be
taken to guarantee
an installation in
accordance with
current accident
prevention
Fig.4
particular attention to the position of the electric
cable and gas pipe: they must not touch any hot
parts of the oven.
Moreover, if the hob is going to be installed on
the top of a built in oven without forced cooling
ventilation, proper air vents must be installed to
guarantee an adequate ventilation, with the lower
air entering with a cross section of at least 200cm
and the higher air exiting with a cross section of at
least 60 cm
2
.
standards. Pay
2
,
Fig.3
MODEL L (mm) P (mm)
DTE714X / W / F / B
DTE715X / W / F / B
DTE772X / W / F / B
DTG764X
DTG775X
DTE792X
DTG795X
Any possible wall unit over the cook-top must be
placed at a distance of at least 760 mm from the
top.
It is advisable to isolate the appliance from the
piece of furniture below with a separator, leaving a
depression space of at least 10 mm (fig. 4).
560 480
860 480
Fastening the top
Every cook-top is equipped with a special washer.
A set of hooks is also supplied for mounting the
cook-top.
For the installation proceed as follows:
Remove the racks and burners from the top.
-
Turn the appliance upside down and lay the
-
washer S along the external border (fig. 5).
Fig.5 Fig.6
Introduce and place the cook-top in the hole made
-
in the piece of furniture, then block it with the V
screws of the fastening hooks G (fig.6.
Installation room
This appliance is not provided with a device for
exhausting the products of combustion. Regarding
6
INSTRUCTIONS FOR THE INSTALLER
room ventilation rules where appliance is installed
make reference to the legislation, in conformity
with the local regulations.
FOR THE U.K. ONLY
The room containing this hotplate should have an
air supply in accordance with BS 5440: Part 2:
1989.
All rooms require an openable window, or
equivalent and some rooms will require a
permanent vent a well.
For room volumes up to 5 m
-
3
an air vent of 100cm
2
is required.
For room volumes between 5 m
-
2
vent of 50 cm
-
If the room is greater than 5 m
is required.
3
and 10 m3 an air
3
and has a door that
opens directly to the outside, then no air vent is
required.
If there are other fuel burning appliances in the
same room BS 5440: Part 2:1989 should be
consulted to determine the air vent requirements.
Gas connection
Make sure that the appliance is adjusted for
the gas type available (see the label under the
appliance). Follow the instructions indicated in
the chapter “gas
transformations
and adjustments”
for the possible
adaptation to
different gases.
The appliance
must be
Fig.7
connected to the gas system by means of stiff metal
pipes or flexible steel pipes having continuous
walls, in compliance with the regulations in force.
Some models are equipped with both cylindrical A
and conical B connectors for gas supply (fig. 7).
Please select the type which is correct for the
supply concerned.
The connection must not stress the gas ramp.
Once the installation is over, check the
connection seal with a soapy solution.
Electric connection
The connection to the electric grid must be carried
out by qualified personnel and in conformity with
the regulations in force.
The voltage of the electric system must correspond
to the value indicated in the label under the
appliance. Make sure that the electric system is
provided with an effective ground connction in
compliance with the regulations and provisions of
the law. Grounding is compulsory.
If the appliance is not equipped with a plug, apply
a standardized plug to the power supply cable.
It is possible to effect the connection to the electric
grid directly, by interposing an omnipolar switch
having a contact opening distance of at least 3
mm.
GAS TRANSFORMATIONS AND ADJUSTMENTS
Replacing the nozzles
If the equipment is adjusted for a type of gas that is
different from the one available, it is necessary to
replace the burner nozzles.
The choice of the nozzles to replace must be
made according to the table of the “technical
characteristics” as enclosed.
Act as follows:
-
Remove the racks and
burners.
-
By means of a straight
spanner L, unscrew
the nozzle U (fig.8) and
substitute it with the
corresponding one.
-
Tighten the nozzle strongly.
Fig.8
Adjusting the burners
The lowest flame point must always be properly
adjusted and the flame must remain on even if
there is an abrupt shift from the maximum to the
minimum position.
If this is not so, it is necessary to adjust the lowest
flame point as follows:
-
start the burner up;
-
turn the tap up to the minimum position (small
flame);
-
remove the knob from the tap rod;
-
introduce a flat-tip screwdriver C in the hole of
control panel of the tap (fig. 9) and turn the bypass screw V (fig.9/A) up to a proper adjustment
of the lowest flame point.
V
Fig.9 Fig.9/A
As regards G30 gas burners, the by-pass screw
must be tightened completely.
7
INSTRUCTIONS FOR THE INSTALLER
MAINTENANCE
Replacing the power supply cable
If the power supply cable should be replaced,
it is necessary
to use a cable
Fig.10
with a section
of 3x0.75mm
for the version
all gas and 3x1
2
mm
version mixed,
for the
2
type HO5VV-F or H05RR-F, complying with the
regulations in force.
The connection to the terminal board must be
effected as shown in fig.10:
brown cable L (phase)
blue cable N (neutral)
green-yellow cable
(ground)
8
MODEL
DTG764X
DTG775X DTG795X
2
1
4
3
2
8
4
2
2
8
DTE714X / W / F / B DTE715X / W / F / B
2
4
8
1
3
2
4
8
5
3
1
3
DTE772X / W / F / B DTE792X
2
4
2
1 Rapid burner 3000 W
2 Semi-rapid burner 1750 W
3 Auxiliary burner 1000 W
4 Triple ring burner 3800 W
5 Electric plate 1500 W
8 Control knob for burner
8
2
1
4
3
2
9
8
1
3
TECHNICAL CHARACTERISTIC TABLES
BURNERS
GAS
N° DESCRIPTION mbar g/h L/h 1/100 mm 1/100 mm Max. Min.
1
2
SEMI-RAPID
3
AUXILIARY
4
RAPID
TRIPLE
CROWN
G30 / G31 28 - 30 / 37 225 - 85 42 3000 950
G20 20 - 290 115Y Reg. 3000 950
G30 / G31 28 - 30 / 37 126 - 65 31 1750 600
G20 20 - 165 97Z Reg. 1750 600
G30 / G31 28 - 30 / 37 71 - 50 27 1000 450
G20 20 - 99 72X Reg. 1000 450
G30 / G31 28 - 30 / 37 278 - 98 60 3800 2100
G20 20 - 367 135K Reg. 3800 2100
NORMAL
PRESSURE
NOMINAL
RATE
INJECTOR
DIAMETER
TAPE BY
PASS
DIAMETER
NOMINAL
HEAT INPUT
(W)
This product complies with EU Directive 2002/96/EC.
The crossed-out dustbin symbol reported on the appliance indicates that the appliance
must be disposed of separately from other domestic refuse at the end of its useful life.
It must therefore be delivered to a waste recycling centre specifically for electric and
electronic equipment or returned to the retailer at the moment of purchase of a new
equivalent appliance.
The user is responsible for delivering the appliance to the appropriate collection centre at the end of its
useful life, Failure to do so may result in a fine, as provided for by laws governing waste disposal.
Differential collection of waste products for eventual recycling, treatment and environmentally friendly
disposal helps reduce possible negative effects on the environment and health, and also enables the
materials making up the product to be recycled.
For more detailed information on the available refuse collection systems, refer to the local Municipal Solid
Waste disposal centre or the shop where the product was purchased.
Producers and importers are responsible for fulfilling their obligations as regards recycling, treatment and
environmentally friendly disposal by directly or indirectly participating in the collection system.
The manufacturing firm refuses all responsibility for any possible imprecision in this booklet, due
to misprints or clerical errors. It reserves the right to make all the changes that it will consider
necessary in its own products, without effecting the essential characteristics of functionality and
safety.
10
AFTER SALES SERVICE
Any maintenance on your equipment should be undertaken by:
either your dealer,
-
or another qualified mechanic who is an authorized agent for the brand appliances.
-
When making an appointment, state the full reference of your equipment (model, type and serial number).
This information appears on the manufacturer’s nameplate attached to your equipment.
For UK after sales service information please contact:
www.dedietrich.co.uk
De Dietrich UK office – tel: 01256 308000
11
Loading...