® |
® |
www.datel.com
Actual Size
DMS-30LCD Series
3½ Digit, LCD Display
Low-Power, Miniature
Digital Panel Voltmeters
Features
•Large (0.4"/10.2mm), enhancedcontrast, LCD display
•Single +5V supply or 9V battery
•Power as low as 3.2mW
•Miniature size:
2.17" x 0.92" x 0.43" 55mm x 23mm x 11mm
•Epoxy-encapsulated, 12-pin DIP
•Backlit displays optional
•4 differential input voltage ranges
•High accuracy, ±1 count (±0.05%)
•Autopolarity changeover and overrange indication
•User-selectable decimal point placement
•Numerous "plug-on" application boards
•0 to +60°C temperature range
Offering all the outstanding features and benefits of DATEL's industry leading DMS-20LCD Series of 3½ Digit LCD Panel Meters, DMS-30LCD meters offer larger, more easily readable displays at slightly higher power consumptions. Like all DMS Series LCD meters, these miniature (2.17" x 0.92" x 0.43"), epoxy-encapsulated devices offer component-like ease-of-use, outstanding reliability and easy installation in either panels or pc-cards.
DMS-30LCD devices operate from a single +5V supply or a 9V battery. Batteryoperated units typically draw 350µA and consume a mere 3.2mW. Backlit models are available for low-light applications; though we have found many designers prefer DATEL's unique low-power LED meters in those circumstances.
Offering 4 optional input voltage ranges (±200mV, ±2V, ±20V or ±200V), DMS30LCD meters have an extremely user-friendly input structure. They can be used in differential or single-ended modes. Input impedance is a minimum 800kΩ . CMRR is typically 86dB. CMV is ±2V, and inputs are overvoltage protected to ±100V.
Each meter incorporates an extremely stable, double regulated reference and is fully calibrated at our factory prior to encapsulation. We guarantee outstanding initial accuracy (±1 count) and excellent stability over temperature (±0.15 counts/°C). These extremely rugged meters are moisture and vibration proof and never require adjustment or recalibration.
For popular applications (4-to-20mA, rms-to-dc conversion, ac line power, J and K thermocouples, etc.), the DMS-30LCD Series includes a complete line of "plug-on" application boards that conveniently convert your meter into an application-specific instrument.
|
+5V SUPPLY/ 1 |
|
|
+5V |
|
|
12 |
|
|
|
|
|
V+ |
|
|||
|
+BATTERY |
|
|
|
|
|
|
(–) INPUT LO |
|
|
|
|
|
R2 |
1 |
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
–5V |
0.01µF |
|
|
|
|
|
|
|
|
R1 |
|
|
3 |
DISPLAY TEST/ |
2 |
DC/DC |
2 |
|
|
11 |
|
|
BACKLIGHT |
|
CONVERTER |
|
V– |
|
(+) INPUT HI |
|
|
|
|
909k |
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
≈ +2.0V |
|
|
|
5V RETURN/ 3 |
|
J1 |
A/D |
|
|
10 ANALOG |
|
|
–BATTERY |
|
0 Vdc |
|
CONVERTER |
|
|
COMMON |
|
|
|
|
|
|
1.23V |
|
|
|
|
4 |
|
|
DATA |
REF. |
|
9 |
|
DP 3 |
|
|
|
|
|
||
|
|
|
|
|
|
|
+1.23V REFERENCE OUT |
|
|
|
|
|
|
|
|
1.82k |
|
|
DP 2 |
5 |
|
|
|
|
|
8 |
|
|
|
|
|
|
|
REFERENCE OUT |
|
|
|
|
|
|
|
+5V |
|
|
|
DP 1 |
6 |
|
|
|
|
|
7 |
|
|
|
|
|
|
|
REFERENCE IN |
|
|
1 R2 is not used on ±200mV (-0) models or ±2V (-1) models. |
2 DC/DC converter is not used on 9V-powered models, |
||||||
|
|
R2 = 100k on ±20V (-2) models and 9.1k on ±200V (-3) models. |
J1 is connected. |
|
|
|||
|
|
|
|
|
|
3 Display Test function is not available on backlit models. |
Figure 1. DMS-30LCD Series Simplified Schematic
DATEL, Inc., Mansfield, MA 02048 (USA) • Tel: (508)339-3000, (800)233-2765 Fax: (508)339-6356 • Email: sales@datel.com • Internet: www.datel.com
DMS-30LCD |
3 ½ D I G I T , L C D D I S P L A Y D I G I T A L P A N E L V O L T M E T E R S |
|
|
Performance/Functional Specifications
Typical at TA = +25°C and supply voltage = +5V (using the single-ended input circuit) or +9V (using the differential input circuit), unless otherwise noted.
Analog Inputs |
Min. |
|
Typ. |
Max. |
|
Units |
Full Scale Input Range: |
|
|
|
|
|
|
DMS-30LCD-0 |
-- |
|
±200 |
-- |
|
mV |
DMS-30LCD-1 |
-- |
|
±2 |
-- |
|
Volts |
DMS-30LCD-2 |
-- |
|
±20 |
-- |
|
Volts |
DMS-30LCD-3 |
-- |
|
±200 |
-- |
|
Volts |
|
|
|
|
|
|
|
Input Impedance: |
|
|
|
|
|
|
DMS-30LCD-0, -1 |
100 |
|
1000 |
-- |
|
MΩ |
DMS-30LCD-2, -3 |
0.8 |
|
1 |
-- |
|
MΩ |
|
|
|
|
|
|
|
Overvoltage Protection |
|
|
|
|
|
|
DMS-30LCD-0, -1, -2 |
-- |
|
-- |
±100 |
|
Volts |
DMS-30LCD-3 |
-- |
|
-- |
±250 |
|
Volts |
|
|
|
|
|
|
|
Common Mode Voltage Range |
-- |
|
-- |
±2 |
|
Volts |
|
|
|
|
|
|
|
CMRR (dc to 60Hz) |
-- |
|
86 |
-- |
|
dB |
Control Inputs |
|
|
|
|
|
|
Decimal Point Placement (Pins 4-6): |
|
|
|
|
|
|
Functionality |
|
|
Tie to pin 3 to activate |
|
||
Logic Compatibility |
|
TTL (on 5V-powered models) |
||||
Display Test (Pin 2) |
|
|
Tie to pin 1 to activate |
|
||
|
|
|
||||
Backlight (Pin 2) |
Tie to pin 3 to turn on backlight |
|||||
Performance |
|
|
|
|
|
|
Sampling Rate |
|
|
2.5 samples per second |
|
||
Accuracy (1 minute warm-up): |
|
|
|
|
|
|
DMS-30LCD-0 (VIN = +0.19) |
-- |
|
±1 |
±2 |
|
Counts |
DMS-30LCD-1 (VIN = +1.9V) |
-- |
|
±1 |
±2 |
|
Counts |
DMS-30LCD-2 (VIN = +19V) |
-- |
|
±2 |
±3 |
|
Counts |
DMS-30LCD-3 (VIN = +190V) |
-- |
|
±2 |
±3 |
|
Counts |
Zero Reading (VIN = 0 Volts) |
"–001" |
|
"000" |
"001" |
|
|
|
|
|
|
|
|
|
Temperature Drift (0 to +60°C) |
-- |
|
±0.15 |
±0.3 |
|
Cnts/°C |
+1.23V Reference Out (Pin 9) |
+1.20 |
|
+1.23 |
+1.25 |
|
Volts |
Power Supply Requirements (5V |
Models) |
|
|
|
|
|
Supply Voltage |
+4.75 |
|
+5.00 |
+5.25 |
|
Volts |
Supply Current: |
|
|
|
|
|
|
Standard Models |
-- |
|
800 |
1200 |
|
µA |
Backlit Models |
-- |
|
45 |
60 |
|
mA |
|
|
|
|
|
|
|
Power Supply Requirements (9V |
Models) |
|
|
|
|
|
Supply Voltage |
+7.5 |
|
+9.0 |
+14.0 |
|
Volts |
Supply Current: |
|
|
|
|
|
|
Standard Models |
-- |
|
350 |
600 |
|
µA |
Backlit Models |
-- |
|
45 |
60 |
|
mA |
|
|
|
|
|
|
|
Display |
|
|
|
|
|
|
Display Type and Size |
3½ Digit LCD, 0.4"/10.2mm high |
|||||
|
|
|
||||
Polarity Indication |
Autopolarity ("–" for negative VIN) |
|||||
|
|
|
|
|
||
Overrange Indication |
|
"–1_ _ _" for negative VIN |
|
|||
|
|
|
"1_ _ _" for positive VIN |
|
||
|
|
|
|
|
|
|
Physical/Environmental |
|
|
|
|
|
|
Operating Temperature |
0 |
|
-- |
+60 |
|
°C |
Storage Temperature |
–20 |
|
-- |
+75 |
|
°C |
|
|
|
|
|
|
|
Humidity (Non-condensing) |
0 |
|
-- |
95 |
|
% |
|
|
|
|
|
|
|
Case Material |
|
|
Polycarbonate |
|
||
Weight |
|
|
0.75 ounces (21 grams) |
|
||
|
|
|
|
|
|
|
Applies for transient or continuous overvoltages applied to (+) INPUT HI (pin 11) with (–) INPUT LO (pin 12) properly connected. Pin 12 is not overvoltage protected (see Figure 1). Voltages applied to pin 12 should not exceed the supply voltage.
Listed spec applies to 5V-powered models only. For 9V-powered models, both (–) INPUT LO (pin 12) and (+) INPUT HIGH (pin 11) must always be at least 1.5V above –BATTERY (pin 3) and at least 1.5V below +BATTERY (pin 1).
See Technical Notes.
Ordering Information
DMS-30LCD - 1 - 5
Input Range: |
|
|
|
|
|
|
|
|
|
|
|
Leave blank for standard |
|
|
|
|
|
|
|
|
|
|
|
||
0 = ±200mV |
|
|
|
|
|
|
|
|
|
|
models. |
|
1 = ±2V |
|
|
|
|
|
|
|
|
|
|
Add B for backlit models. |
|
2 = ±20V |
|
|
|
|
|
|
|
|
|
|
|
|
3 = ±200V |
|
|
|
Power Source: |
||||||||
|
|
|
|
|
|
5 = +5V |
||||||
|
|
|
|
|
|
9 = +9V |
||||||
Accessories: |
|
|
|
|
|
|
|
|
|
|
|
|
DMS-30-CP |
Panel cutout punch |
|||||||||||
DMS-BZL1 |
DMS-30 bezel assembly |
|||||||||||
DMS-BZL2 |
DMS-30 bezel assembly with sealing gasket |
|||||||||||
RN-DMS |
Gain/offset potentiometer kit for DMS-EB, |
|||||||||||
|
|
DMS-EB-AC/DC and DMS-EB-DC/DC |
||||||||||
Add-On Application Boards: |
||||||||||||
DMS-EB |
Multi-purpose (gain/offset, 4-20mA, etc.) |
|||||||||||
DMS-EB-HTB |
High-accuracy temperature probe sensing for |
|||||||||||
|
|
±200mV models |
||||||||||
DMS-EB-DC/DC |
Provides isolated +5V power |
|||||||||||
DMS-EB-TCJ |
J-type thermocouple inputs for ±2V models |
|||||||||||
DMS-EB-TCK |
K-type thermocouple inputs for ±2V models |
|||||||||||
DMS-EB-RMS |
For true rms measurements of ac voltages |
|||||||||||
DMS-EB-AC/DC |
For ac line-powered applications |
|||||||||||
DMS-EB-LP |
For 4-to-20mA loop-powered applications |
A panel-mount retaining clip is supplied with each model.
Order on-line at www.datel.com
Technical Notes
1.+1.23V REFERENCE OUTPUT (Pin 9): This pin is the output of the meter’s precision +1.23V internal reference, and it is referenced to ANALOG COMMON (pin 10) which sits at a potential of approximately +2V. This output should be buffered if used to drive external loads since sourcing more than 15µA from pin 9 can affect both the initial accuracy and temperature drift of the meter.
2.ANALOG COMMON (Pin 10): This pin is connected to an internal, low-noise, "relative" ground. It is used in certain differential and "floating" measurements as described in the Applications section of this data sheet and Ap Note 3 of the DATEL Panel Meter Catalog.
Pin 10 should not be connected to pin 3 (5V RETURN/ –BATTERY) or to your system’s analog ground.
2