Daikin EKMBDXB7V1 Installation manuals
Installation manual
Modbus Interface DIII
EKMBDXB7V1
Installation manual
Modbus Interface DIII
English
331
L N
2
BMS
L
2×
1×
365 mm
100 mm
379 mm
≥300 mm
≥50 mm
≥50 mm ≥100 mm
≥50 mm
87 mm
40 mm
Max.
60°C
IP X0
Min.
0°C
www.daikineurope.com/support-and-manuals/product-information/
UNIT
F1
F2
Q1DI
1N~ 50 Hz 230 V AC
124 mm
2×
1×
RS485
0.75~1.25 mm
2
MAX 500 m
Design guide
0.75~1.25 mm
2
X3M
X1M
L N
A+
B-
F1
F2
RS485
TO OUT
D UNIT/
1x
1x
1 Introduction
1 Introduction
See the illustrations at the beginning of this manual.
2 General safety precautions
2.1 About the documentation
▪ The original documentation is written in English. All other
languages are translations.
▪ The precautions described in this document cover very important
topics, follow them carefully.
▪ The installation of the system, and all activities described in the
installation manual and in the installer reference guide MUST be
performed by an authorised installer.
2.1.1 Meaning of warnings and symbols
DANGER
Indicates a situation that results in death or serious injury.
DANGER: RISK OF ELECTROCUTION
Indicates a situation that could result in electrocution.
WARNING
Indicates a situation that could result in death or serious
injury.
CAUTION
Indicates a situation that could result in minor or moderate
injury.
WARNING
Tear apart and throw away plastic packaging bags so that
nobody, especially children, can play with them. Possible
risk: suffocation.
WARNING
Provide adequate measures to prevent that the unit can be
used as a shelter by small animals. Small animals that
make contact with electrical parts can cause malfunctions,
smoke or fire.
CAUTION
▪ Do NOT place any objects or equipment on top of the
unit.
▪ Do NOT sit, climb or stand on the unit.
DANGER: RISK OF BURNING/SCALDING
Do NOT touch the heating element of the unit, water piping
or internal parts during and immediately after operation. It
could be too hot or too cold. Give it time to return to normal
temperature. If you must touch it, wear protective gloves.
In accordance with the applicable legislation, it might be necessary
to provide a logbook with the product containing at least: information
on maintenance, repair work, results of tests, stand-by periods,…
Also, at least, following information MUST be provided at an
accessible place at the product:
▪ Instructions for shutting down the system in case of an emergency
▪ Name and address of fire department, police and hospital
▪ Name, address and day and night telephone numbers for
obtaining service
In Europe, EN378 provides the necessary guidance for this logbook.
NOTICE
Indicates a situation that could result in equipment or
property damage.
INFORMATION
Indicates useful tips or additional information.
2.2 For the installer
2.2.1 General
If you are NOT sure how to install or operate the unit, contact your
dealer.
WARNING
Improper installation or attachment of equipment or
accessories could result in electrical shock, short-circuit,
leaks, fire or other damage to the equipment. Only use
accessories, optional equipment and spare parts made or
approved by Daikin.
WARNING
Make sure installation, testing and applied materials
comply with applicable legislation (on top of the
instructions described in the Daikin documentation).
CAUTION
Wear adequate personal protective equipment (protective
gloves, safety glasses,…) when installing, maintaining or
servicing the system.
2.2.2 Installation site
▪ Provide sufficient space around the unit for servicing and air
circulation.
▪ Make sure the installation site withstands the weight and vibration
of the unit.
▪ Make sure the area is well ventilated. Do NOT block any
ventilation openings.
▪ Make sure the unit is level.
▪ Make sure that the floor, where the unit will be installed, is level.
Do NOT install the unit in the following places:
▪ In potentially explosive atmospheres.
▪ In places where there is machinery that emits electromagnetic
waves. Electromagnetic waves may disturb the control system,
and cause malfunction of the equipment.
▪ In places where there is a risk of fire due to the leakage of
flammable gases (example: thinner or gasoline), carbon fibre,
ignitable dust.
▪ In places where corrosive gas (example: sulphurous acid gas) is
produced. Corrosion of copper pipes or soldered parts may cause
the refrigerant to leak.
▪ In bathrooms.
▪ In places where frost is possible. The ambient temperature around
the indoor unit should be >5°C.
EKMBDXB7V1
Modbus Interface DIII
4P635058-1 – 2020.10
Installation manual
3
Loading...