DAIKIN BRC1D71 OPERATION MANUAL

BRC1D71

OPERATION MANUAL

Remote controller

823 76

24520 211816 13 15 19

29 33

31 323028

Start

FUNCTION

FUNCTIONSCHEDULE

FUNCTION

FUNCTION SETBACK

SETBACK

MODE

max/min

TIME

TEMP

SETBACK

TEMP

End

BRC1D71 Remote controller Operation manual

THANK YOU FOR PURCHASING THIS CONTROLLER. READ THE MANUAL ATTENTIVELY BEFORE USING THE INSTALLATION. AFTER READING THE MANUAL, STORE IT IN A SAFE PLACE FOR FUTURE USE.

Before initial operation, contact your dealer to obtain all details concerning your air conditioning installation.

SAFETY CONSIDERATIONS

We recommend that you read this instruction manual carefully before use to gain full advantage of the function of the air conditioner, and to avoid malfunction due to mishandling.

- The precautions described below are DANGER, WARNING and CAUTION. These are very important precautions concerning safety. Be sure to observe all of them without fail.

DANGER...... Indicates an imminently hazardous

WARNING.... These are the matters with

Operation manual

situation which, if not avoided, will result in death or serious injury.

possibilities leading to serious consequences such as death or serious injury due to erroneous handling.

CAUTION..... These are the matters with

- After reading, keep this manual at a place where any user can read at any time. Furthermore, make certain that this operation manual is handed to a new user when he takes over the operation.

possibilities leading to injury or material damage due to erroneous handling including probabilities leading to serious consequences in some cases.

DANGER

- Do not install unit in an area where ﬂammable materials are present due to risk of explosion resulting in serious injury or death.

- Never place a spray bottle containing ﬂammable liquid near the air conditioner and never spray ﬂammable liquids near the air conditioner.

This could result in ﬁre or explosion which could cause serious injury or death.

- Any abnormalities in the operation of the air conditioner such as smoke or ﬁre could result in severe injury or death.

Turn off the power and contact your dealer immediately for instructions.

WARNING

- When the air conditioner is in abnormal conditions (smell of something burning, etc.), turn off the power supply, and contact the dealer where you purchased the air conditioner.

Continued operation under such circumstances may result in a failure, electric shock, and ﬁre.

Remote controller

BRC1D71

3P166742-1

- Ask your dealer for installation of the air conditioner.

Incomplete installation performed by yourself may result in a water leakage, electric shock, and ﬁre.

- Ask your dealer for improvement, repair, and maintenance.

Incomplete improvement, repair, and maintenance may result in a water leakage, electric shock, and ﬁre.

- Ask your dealer to move and reinstall the air conditioner.

Incomplete installation may result in a water leakage, electric shock, and ﬁre.

- Operating the air conditioner with wet hands could result in a shock hazard.

- To avoid shock hazard and injury, turn off the air conditioner and its power supply before cleaning.

- To avoid shock hazard and injury, do not wash the remote controller with water.

- Never touch the internal parts of the controller.

Do not remove the front panel because some parts inside are dangerous to touch. In addition, some parts may be damaged. For checking and adjusting internal parts, contact your dealer.

- Never let the remote controller get wet, this may cause an electric shock or ﬁre.

- Never press the buttons of the remote controller with a hard, pointed object. The remote controller may be damaged.

- Never inspect or service the remote controller yourself, ask a qualiﬁed service person to do this.

CAUTION

- The remote controller should be installed in such a way that children cannot play with it.

BRC1D71 Remote controller 3P166742-1

Contents

1. Features and functions..........................................2

2. Name and function of switches and icons .............3

3. Setting up the controller.........................................5

4. Description of the operation modes.......................6

5. Operation...............................................................6

6. Programming the schedule timer.........................11

1. Features and functions

The BRC1D71 is a state of the art remote controller that offers full control over your installation.

1 BASIC REMOTE CONTROLLER

The basic remote controller functions are:

• ON/OFF,

• operation mode change-over,

• temperature adjustment,

• air volume adjustment

• air ﬂow direction adjustment.

2 CLOCK FUNCTION

The clock functions are:

• 24 hours real time clock,

• day of the week indicator.

3 SCHEDULE TIMER FUNCTION

The schedule timer functions are:

• a maximum of 5 actions can be programmed for each day of the week (totalling 35 actions),

• schedule timer can be enabled/disabled at any time,

• linked to a set temperature or a LIMIT operation or an OFF operation,

• "last command" overrules previous command until next scheduled command.

4 LIMIT OPERATION

Limit operation provides thermostat control within the range of the set minimum and maximum temperature. The minimum temperature setting will trigger heating, the maximum temperature setting will trigger cooling.

Operation manual

page

5AWAY

The away function prevents the room temperature from dropping or rising when the occupants are out for a longer period. If the room temperature drops below 50°F, heating is started automatically. As soon as 59°F is reached, the controller returns to its original status. If the room temperature rises above 85°F, cooling is started automatically. As soon as 74°F is reached the controller returns to its original states.

6 BUTTON PERMISSION LEVEL

Three hierarchical permission levels can be set to limit the user action.

2. Name and function of switches and

(Refer to ﬁgure 1)

icons

1 ON/OFF BUTTON

Press the ON/OFF button to start or stop the system.

2 OPERATION LAMP

The operation lamp lights up during operation or blinks if a malfunction occurs.

3 OPERATION MODE ICON

These icons indicate the current operation mode (FAN, DRY, AUTOMATIC, COOLING, HEATING).

4 VENTILATION MODE ICON

These icons indicate the current ventilation mode ( only) (AUTOMATIC, HEAT EXCHANGE, BYPASS).

5 VENTILATION ICON

The ventilation icon appears when the ventilation is adjusted with the ventilation amount button ( only). Simultaneously, the ventilation amount is indicated by the fan speed icon (see 22).

Operation manual

6 AIR CLEANING ICON

This icon indicates that the air cleaning unit (option) is operational.

7 AWAY ICON

The away icon shows the status of the away function.

ON AWAY is enabled

FLASHING AWAY is active

OFF AWAY is disabled

8 EXTERNAL CONTROL ICON

This icon indicates that another controller with higher priority is controlling or disabling your installation.

9 CHANGE-OVER UNDER CENTRALISED

CONTROL ICON

This icon indicates that the change-over of the installation is under centralised control assigned to another indoor unit or optional cool/heat selector connected to the outdoor unit (= master remote controller).

10 DAY OF THE WEEK INDICATOR

The day of the week indicator shows the current week day (or the set day when reading or programming the schedule timer).

11 CLOCK DISPLAY

The clock display indicates the current time (or the action time when reading or programming the schedule timer).

Remote controller

BRC1D71

3P166742-1

+ 14 hidden pages