Daikin BRC1D619 Operation Manual

R e m o te c o nt ro l le r

B R C 1D619

OP E R AT IO N MA NU A L

1

1

129

3

25

22

11

10

37

35

27

26

12

14

17

34

24520 211816 13 15 19

323130

29

28

4

36

33

823 76

2

Start

5s

5s

5s

+

5s

5s

End

Operation manual

1

BRC1D61

Remote controller

3P107422-3D

WARNING

- Never let the remote controller get wet, this may
cause an electric shock or fire.

- Never press the buttons of the remote controller
with a hard, pointed object. The remote controller
may be damaged.

- Never inspect or service the remote controller
yourself, ask a qualified service person to do this.

Contents page

1. Features and functions.......................................... 1

2. Name and function of switches and icons ............. 2

3. Setting up the controller ........................................ 4

4. Description of the operation modes ......................5

5. Operation............................................................... 5

6. Programming the schedule timer ........................10

1. Features and functions

The BRC1D61 is a state of the art remote controller
that offers full control over your installation.

1 BASIC REMOTE CONTROLLER

The basic remote controller functions are:

• ON/OFF,

• operation mode change-over,

• temperature adjustment,

• air volume adjustment

• air flow direction adjustment.

2 CLOCK FUNCTION

The clock functions are:

• 24 hours real time clock,

• day of the week indicator.

3 SCHEDULE TIMER FUNCTION

The schedule timer functions are:

• a maximum of 5 actions can be programmed
for each day of the week (totalling 35 actions),

• schedule timer can be enabled/disabled at any
time,

• linked to a set temperature or a LIMIT
operation or an OFF operation,

• "last command" overrules previous command
until next scheduled command.

4 LIMIT OPERATION

Limit operation provides thermostat control within the
range of the set minimum and maximum temperature.
The minimum temperature setting will trigger heating,
the maximum temperature setting will trigger cooling.

BRC1D61 Remote controller Operation manual

THANK YOU FOR PURCHASING THIS
CONTROLLER. READ THE MANUAL
ATTENTIVELY BEFORE USING THE
INSTALLATION. AFTER READING THE
MANUAL, STORE IT IN A SAFE PLACE
FOR FUTURE USE.

Before initial operation, contact your dealer
to obtain all details concerning your air
conditioning installation.

BRC1D61
Remote controller

3P107422-3D

Operation manual

2

5 LEAVE HOME

The leave home function prevents the room
temperature from dropping when the occupants are
out for a longer period. If the room temperature drops
below 10°C, heating is started automatically. As soon
as 15°C is reached, the controller returns to its
original status.

6 BUTTON PERMISSION LEVEL

Three hierarchical permission levels can be set to
limit the user action.

2. Name and function of switches and
icons (Refer to figure 1)

1 ON/OFF BUTTON

Press the ON/OFF button to start or stop the system.

2 OPERATION LAMP

The operation lamp lights up during operation or
blinks if a malfunction occurs.

3 OPERATION MODE ICON

These icons indicate the current operation mode
(FAN, DRY, AUTOMATIC, COOLING, HEATING).

4 VENTILATION MODE ICON

These icons indicate the current ventilation mode
( only) (AUTOMATIC, HEAT EXCHANGE,
BYPASS).

5 VENTILATION ICON

The ventilation icon appears when the ventilation is
adjusted with the ventilation amount button (
only). Simultaneously, the ventilation amount is
indicated by the fan speed icon (see 22).

6 AIR CLEANING ICON

This icon indicates that the air cleaning unit (option) is
operational.

7 LEAVE HOME ICON

The leave home icon shows the status of the leave
home function.

8 EXTERNAL CONTROL ICON

This icon indicates that another controller with higher
priority is controlling or disabling your installation.

9 CHANGE-OVER UNDER CENTRALISED

CONTROL ICON

This icon indicates that the change-over of the
installation is under centralised control assigned to
another indoor unit or optional cool/heat selector
connected to the outdoor unit (= master remote
controller).

10 DAY OF THE WEEK INDICATOR

The day of the week indicator shows the current week
day (or the set day when reading or programming the
schedule timer).

11 CLOCK DISPLAY

The clock display indicates the current time (or the
action time when reading or programming the
schedule timer).

ON Leave home is enabled

FLASHING Leave home is active

OFF Leave home is disabled

Operation manual

3

BRC1D61

Remote controller

3P107422-3D

12 MAXIMUM SET TEMPERATURE

The maximum set temperature indicates the
maximum set temperature when in limit operation.

13 MINIMUM SET TEMPERATURE

The minimum set temperature indicates the minimum
set temperature when in limit operation.

14 SCHEDULE TIMER ICON

This icon indicates that the schedule timer is enabled.

15 ACTION ICONS

These icons indicate the actions for each day of the
schedule timer.

16 OFF ICON

This icon indicates that the OFF action is selected
when programming the schedule timer.

17 INSPECTION REQUIRED and

These icons indicate that inspection is required.
Consult your installer.

18 SET TEMPERATURE DISPLAY

This indicates the current set temperature of the
installation (not shown in LIMIT operation or in FAN or
DRY mode).

19 SETTING

Not used, for service purposes only.

20 AIR FLOW DIRECTION ICON

This icon indicates the air flow direction (only for
installations with motorised air flow flaps).

21 NOT AVAILABLE

is displayed whenever a non-installed option

is addressed or a function is not available.

22 FAN SPEED ICON

This icon indicates the set fan speed.

23 DEFROST/HOTSTART MODE ICON

This icon indicates that the defrost/hotstart mode is
active.

24 AIR FILTER CLEANING TIME ICON

This icon indicates the air filter must be cleaned.
Refer to the manual of the indoor unit.

25 ELEMENT CLEANING TIME ICON

This icon indicates the element must be cleaned
( only).

26 VENTILATION MODE BUTTON

The ventilation mode button operates the ; refer
to the manual for more details.

27 VENTILATION AMOUNT BUTTON

This button sets the ventilation amount; refer to the

manual for more details.

28 INSPECTION/TEST OPERATION BUTTON

Not used, for service purposes only.

29 PROGRAMMING BUTTON

This button is a multi-purpose button.

Depending on the previous manipulations of the user,
the programming button can have various functions.