Daewoo DWF-33CG Series Instruction Manual

␊ Uses revolutionary technology that goes beyond washing,

sterilizes clothes, and eliminate odors.

␊ Improves washing performance by more than 35%, while

reducing power consumption by 40%.

␊ One-Touch Operating System

␊ Decreases noise level with its innovative design.

␊ Before operating this washer, please read these instructions

completely. Thank you.

Full-Auto Electric Washing Machine

Model: DWF-33CG**

A NOTE TO YOU

Thank you for buying a DAEWOO appliance. DAEWOO washers are easy to use, save time, and help you manage your home more efficiently. This manual contains valuable information about how to operate and maintain your washer properly and safely. Please read it carefully.

INSTRUCTION MANUAL

CONTENTS Page

PARTS AND FEATURES................................................................2

IMPORTANT SAFETY INSTRUCTIONS .......................................3

INSTALLATION INSTRUCTIONS ...................................................4

ELECTRICAL REQUIREMENTS ....................................................5

INLET HOSE CONNECTION ..........................................................6

OPERATING YOUR WASHER .......................................................7

THE FUNCTIONS OF THE CONTROL PANEL..............................8

WASHING PROCEDURE AND COURSE SELECTION .................9

GENERAL PROCEDURE FOR OPERATION...............................13

CARING FOR YOUR WASHER....................................................14

HOW TO CLEAN THE FILTER .....................................................15

REMOVING STAINS .....................................................................17

TROUBLE SHOOTING .................................................................18

SPECIFICATION ...........................................................................19

As an E

NERGYSTAR

® partner,

DAEWOO has determined that this product meets the E

NERGY

TAR

® guidelines for energy

efficiency.

PARTS AND FEATURES

The parts and features of your washer are illustrated on the page. Become familiar with all parts and features before using your washer.

NOTE

• The drawings in the book may vary from your washer model. They are designed to show the different features of all models coverd by this book,Your model may not include all features.

• COLD WATER TAP

After using the washing machine, close the water tap.

ACCESSORIES

NOTE

• The drawings in the book may vary from your washer model. They are designed to show the different features of all models covered by this book; your model may not include all features.

• HOT WATER TAP

After using the washing machine, close the water tap. In case of the single valve model, There is no hot water valve in the model containing a single valve.

• CONTROL PANEL

• POWER CORD

•

Ground wire not provided with 3-wire power cord model

• HOSE DRAIN

• ADJUSTABLE LEG

• CASE DETERGENT AND SOFTENER

INLET HOSE HOSE DRAIN MANUAL

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

USER-MAINTENANCE INSTRUCTIONS

Keep area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint, dust, and dirt.

OPERATING INSTRUCTIONS

"WARNING - To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance." This statement is omitted when the operating instructions are preceded by the safety instructions and are included in the same manual.

Understanding your responsibilities when using the washer.

1. Do not use chlorine bleach, ammonia, or acid (such as vinegar or rust remover)

2. Unplug power supply cord before attemping to service your washer.

3. Do not wash fiberglass material. Small particles can stick to fabrics washed in following loads and cause skin irritation.

4. Do not spray water on the control panel of the washer. It could cause fire or an electric shock.

5. In the dual valve model, be sure to connect both inlet valves. If only one valve is connected, and water temperature changes, water leakage from unconnected water inlet valve might occur.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life

WARNING! - To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions,

including the following :

1. Read all instructions before using the appliance.

2. Do not wash or dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, other flammable or explosive substances as they give off vapors that could ignite or explode.

3. Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children.

4. Before the appliance is removed from service or discarded, remove the door to the washing or drying compartment.

5. Do not reach into the appliance if the tub or agitator is moving.

6. Do not install or store this appliance where it will be exposed to the weather.

7. Do not tamper with controls

8. Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that you understand and have the skills to carry out.

9. Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.

10. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using a washing machine or combination washer-dryer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

11. Do not place items exposed to cooking oils in your dryer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire

12. Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials.

13. Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.

14. To reduce the risk of fire, this appliance must be fastened or otherwise secured to an uncovered concrete floor.

WARNING! - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a

qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician

INSTALLATION INSTRUCTIONS

Location of washer

Check location where washer will be installed. Make sure you have everything necessary for correct installation. Proper installation is your responsibility.

• Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.

• Install the washer on a horizontal solid floor.

• To reduce the risk of fire, this appliance must be fastened or otherwise secured to an

uncovered concrete floor.

Drain system

Never forget to install drain hose before operating your washer. When opening the packing box, you will see a drain hose in the washer.

If the washer is installed on an unsuitable floor, it could make considerable noise, vibration and cause a malfunction. If washer is not level, adjust the front leg(A) up or down for horizontal setting.

• Earthed electrical outlet(B) is required with 20cm (7.9 inches) of bottom back of washer cabinet.

• Hot and cold water faucets (C) must be within 1M (39.4inches) of the upper back of the washer cabinet and provide water pressure 4psi ~ 114psi.

• Connect the drain hose to the drain outlet at the back of the washing machine.

Pump Model

NOTES

• The opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.

DOWN

Drain Outlet

Drain hose

ELECTRICAL REQUIREMENTS

• Top of tub must be at least 86cm (34inches) high and no higher than 130cm (51.2inches) from bottom of washer (A)

• Needs a 3cm (1.2inches) minimum diameter standpipe with minimum carry away capacity of 30liters per minute.

• Top of tub must be at least 86cm (34inches) high and no higher than 130cm (51.2inches) from bottom of washer (B)

Laundry tub drain system Standpipe drain system

Pump Model

WARNING

• Electrical earth is required on this washer.

• If it does not fit the outlet, have a proper outlet installed by a qualified electrician.

• Don’t earth to a gas pipe.

• Don’t change the power supply cord plug.

• Check with a qualified electrician if you are not sure the washing machine is properly earthed.

Recommended earthing method

Electrical shock hazard : Failure to follow these instructions could result in

death or serious injury.

For your personal safety , this washer must be grounded. This washer has GROUND WIRE. To minimize electrical shock hazard, GROUND WIRE must be connected the earthing-type wall or ground. It is the personal responsibility and obligation of the customer to be grounded by the qualified electrician.

20cm

GROUND

WIRE

(7.9 inches)

INLET HOSE CONNECTION

NOTES

• When connecting the water inlet valve, please find the symbol for each. for hot water inlet, for cold water inlet.

• Water supply pressure must be between 4.5 and 145 PSI (30~1000 kPa).

• Do not crossthread when connecting inlet hose to the valve. If the water supply pressure is more than 145 PSI, a pressure reducing device should be installed.

• Two Sealing washers are supplied with the water inlet hoses to prevent water leaks.

• Check for leakage of washing machine connections by turning the tap completely on.

• Periodically check the condition of the hose and replace the hose if necessary.

• Make sure that there is no kink in the hose and that it is not crushed.

• Be sure that the two water input ports are connected to the correct water faucets. The connector for hot water is colored red.

Repairs to the washing machine must only be carried out by qualified personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local service center.

Do not install your washing machine in a room where temperatures below freezing may occur. Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below the freezing point

If the appliance is delivered in the winter months and temperatures are below freezing, store the washing machine at room temperature for a few hours before putting it into operation.

(Connect to the faucet)

(Connect to the water

valve of the washer)

OPERATING YOUR WASHER

To obtain the best washing results, you must operate your washer properly. This section gives you this important information.

• Close zippers, snaps, and hooks to avoid snagging other items. Remove pins, buckles, and other hard objects to avoid scratching the washer interior.

• Empty pockets and turn them inside out.

• Turn down cuffs and turn synthetic knits out to avoid piling.

• Tie strings and sashes so they will not tangle.

• Treat spots and stains. (see “Removing stains” on page15)

Preparing clothes for washing

• Separate heavily soiled items from lightly soiled ones, even if they would normally be washed together.

• Separate dark colors from light colors, colorfast items from non-colorfast items.

Sorting

• Drop items into washer loosely. Items should move easily through wash water for best cleaning and wrinkle-free results.

• Load washer properly and select correct load size setting. Overloading and selecting a setting too small for the wash load can:

- cause poor cleaning

- increase wrinkling

- create excessive lint

- wear out items faster (because of piling)

• Mix large and small items in each load. Load evenly to maintain washer balance. An off balance load can make the washer vibrate during spin.

• Reduce wash time when using a small load size setting. Loads with only a few small items need less wash time.

• Use a large load size setting to reduce wrinkling with permanent press clothes and some synthetic knits. These items should have more room to move in the water than heavy items. (towels, jeans)

+ 14 hidden pages

Daewoo DWF-33CG Series Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual