Cyberlink LabelPrint - 2.0 User’s Guide

CyberLink
LabelPrint
User’s Guide
Copyright and Disclaimer
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means electronic, mechanical, photocopying, recording, or otherwise without the prior written permission of CyberLink Corporation.
BY USING THIS SOFTWARE, YOU AGREE THAT CYBERLINK WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, OR CONSEQUENTIAL LOSS ARISING FROM THE USE OF THIS SOFTWARE OR MATERIALS CONTAINED EITHER IN THIS PACKAGE.
The terms and conditions here under shall be governed and construed in accordance with the laws of Taiwan.
LabelPrint is a registered trademark along with other company and product names mentioned in this publication, used for identification purposes and remain the exclusive property of their respective owners.
International Headquarters
Mailing Address
Web Site
Telephone
Fax
Copyright © 2006 CyberLink Corporation. All rights reserved.
CyberLink Corporation 15F, #100, Minchiuan Road, Shindian City, Taipei 231, Taiwan
www.cyberlink.com
886-2-8667-1298
886-2-8667-1300
Contents
Introduction.............................................................. 1
The Cyberlink LabelPrint Program ................................................................ 2
Navigate in Cyberlink LabelPrint ............................................................ 3
Configuration Options ......................................................................... 4
Register Your Software ............................................................................... 6
Upgrade Your Software .............................................................................. 7
System Requirements .................................................................................. 8
Creating Labels ........................................................ 9
LightScribe Media Identification ................................................................ 10
LabelFlash Media Identification ................................................................. 11
Select a Label Type .................................................................................. 12
Edit Disc Information ................................................................................ 13
Display Disc Information ..................................................................... 13
Add Items to the Content List .............................................................. 14
Remove Items from the Content List ..................................................... 15
Insert a Row in the Middle of the Content List ....................................... 15
Re-Order Items in the Content List ....................................................... 16
Modify Content List Information .......................................................... 16
Edit a Label’s Layout ................................................................................ 17
Layout-Editing Tools ........................................................................... 17
Select a Label Layout ......................................................................... 18
Add a Background Image ................................................................... 19
Add or Modify Text ............................................................................ 19
Add a Foreground Image ................................................................... 20
Re-Order Text and Images .................................................................. 20
i
CyberLink LabelPrint
Delete a Text Box or Image ................................................................. 20
Print a Label ............................................................................................ 21
Display Printer Options ....................................................................... 21
Print a Label on a Printer .................................................................... 22
Print a Label directly on a disc face ..................................................... 23
Burn a Disc Label Using LightScribe ..................................................... 24
Burn a Disc Label Using LabelFlash ..................................................... 26
Technical Support ................................................... 27
Web Support ........................................................................................... 28
Telephone Support .................................................................................. 29
Index ..................................................................... 31
ii
Chapter 1:

Introduction

Cyberlink LabelPrint is a handy tool for printing labels for use with your disc media. This chapter introduces the Cyberlink LabelPrint program, including how to navigate through the program windows, configure the program to suit your working methods, register your copy of the program, and upgrade to a new version. The final section presents the minimum system requirements for using Cyberlink LabelPrint.
This chapter contains the following sections:
The Cyberlink LabelPrint Program on p.2
Register Your Software on p.6
Upgrade Your Software on p.7
System Requirements on p.8
1
CyberLink LabelPrint

The Cyberlink LabelPrint Program

Cyberlink LabelPrint is a handy program for printing disc labels, covers, and inlays. Cyberlink LabelPrint offers a wide variety of layout formats and supports a number of printing options, including printing directly on your disc using LightScribe technology, burning images on either side of your disc using LabelFlash, and direct CD/ DVD printing.
When you first open Cyberlink LabelPrint, the program appears as follows:
Procedure pane
About
2
Note: The LabelFlash option only appears if you have a LabelFlash­compatible burning drive installed on your computer.
Note: The LightScribe option only appears if you have a LightScribe­compatible burning drive installed on your computer. If your drive is installed but the LightScribe option still does not appear, make sure that the LightScribe Host Software that came with your drive is installed.

Navigate in Cyberlink LabelPrint

After you have finished selecting options on a page, click to advance to the next page. Alternately, you can click a step in the Procedure pane on the left-hand side of the program to skip directly to a specific page.
Introduction
3
CyberLink LabelPrint

Configuration Options

Cyberlink LabelPrint offers several configuration options in order to suit your working methods.
Printer Calibration
Calibrating your printer ensures that your printer is properly aligned with your template. You may wish to calibrate your printer before printing to ensure optimal printing quality.
Note: You won’t normally need to calibrate your printer unless you have inserted a new ink cartridge or installed a new printer.
To display printer calibration options, click . The Configuration
dialog box opens.
X Offset and Y Offset: Correlate the printer’s position to the
original calibration. Click the up/down arrows to move the calibration mark , or drag the calibration mark to the desired position.
General Settings
Before you begin creating labels, you may want to make sure the program is configured to suit your preferred working methods. You can set general configuration options in the General Settings tab of the Configuration dialog box.
To display general configuration options, click . In the
Configuration dialog box, click the General Settings tab.
Draw outline of the disc label: Draws a border around your
disc label. This border is helpful for cutting out the label when you print onto a plain piece of paper.
Hide item number: Prints your disc’s contents list without
numbering the items it contains.
4
LightScribe Settings
If you are burning your disc label using a LightScribe drive, you can specify that drive in the Configuration dialog box.
Note: The LightScribe tab only appears if you have a LightScribe­compatible burning drive installed on your computer.
To display LightScribe configuration options, click . In the
Configuration dialog box, click the LightScribe tab.
Select your LightScribe disc label printing drive: Allows
you to select your LightScribe-compatible burning drive from the drop-down menu. Drive-specific information appears below the selected drive.
LabelFlash Settings
If you are burning a label using a LabelFlash drive, you can specify that drive in the Configuration dialog box.
Note: The LabelFlash tab only appears if you have a LabelFlash­compatible burning drive installed on your computer.
Introduction
To display LabelFlash configuration options, click . In the
Configuration dialog box, click the LabelFlash tab.
Select your LabelFlash disc label printing drive: Allows you
to select your LabelFlash-compatible burning drive from the drop-down menu. Drive-specific information appears below the selected drive.
5
CyberLink LabelPrint

Register Your Software

After you install the program, a registration window opens, prompting you to register your product. It is important to register your software in order to receive technical support or other information from CyberLink.
To register your software, do this:
1. Enter your personal information in the First Name, Last Name, and Email entry boxes.
Check one or both of the options to receive information from
CyberLink, or uncheck if you do not wish to receive this information.
2. Click Register Now.
6
If you have previously registered this product, click I Have
Already Registered. The registration box will no longer open
when you run the program.
If you would like to register this product at a later time, click
Remind Me Later. The registration box will open each time you run the program until you register.

Upgrade Your Software

Software upgrades may be periodically available from CyberLink. To
upgrade your software, click in the row of buttons across the
top of the window. A web browser window opens to CyberLink’s website, where you can upgrade your program as well as receive other information about CyberLink and CyberLink’s products.
Introduction
Note: You must be connected to the Internet to use this feature.
7
CyberLink LabelPrint

System Requirements

The system requirements listed below are recommended as minimums for using this program.
Minimum System Requirements
OS Windows 98SE/ME/2000/XP
(Windows 2000/XP required to enable LightScribe technology)
Memory 128 MB RAM
CPU Pentium III 700 MHz or above or AMD Athlon 700 or
above
8
Hard Disk Space
Other DirectX 9
80 MB
Printer, LightScribe-compatible CD/DVD burner or LabelFlash-compatible burner
Chapter 2:

Creating Labels

The process of creating and printing labels in Cyberlink LabelPrint is a simple four-step procedure. This chapter describes the label creation procedure in full, with information on all of the available options.
This chapter contains the following sections:
LightScribe Media Identification on p.10
LabelFlash Media Identification on p.11
Select a Label Type on p.12
Edit Disc Information on p.13
Edit a Label’s Layout on p.17
Print a Label on p.21
9
CyberLink LabelPrint

LightScribe Media Identification

The LightScribe system requires the use of LightScribe-enabled discs. LightScribe uses control features in the center/hub of the disc to identify media as LightScribe media. If your system does not seem to recognize the media as LightScribe media, take the following steps.
1. Make sure the disc is a LightScribe-enabled disc. LightScribe media will have the LightScribe logo in the inner hub area. There will also be visible control features inside, and adjacent to, the coated label area.
2. Make sure the disc is properly oriented in the drive. The label side, which contains a special coating, should be face down in the drive.
3. Clean the center area (hub) of the disc. Use a lint-free cloth to wipe the hub area and remove any dirt or smudges that may be covering the control features.
4. If these steps do not fix the problem, try another LightScribe disc.
10
Creating Labels

LabelFlash Media Identification

LabelFlash system requires the following discs:
Burning on Data Side: CD-R, DVD+R and DVD-R
Burning on Label Side: LabelFlash DVD+R and LabelFlash
DVD-R
If your system does not seem to recognize the media, take the following steps
1. When burning images on the label side, make sure the disc is a LabelFlash-enabled disc. LabelFlash media will have the LabelFlash logo in the inner hub area.
2. Make sure the disc is properly oriented in the drive. The side which will be printed, should be face down in the drive.
3. Clean the center area (hub) of the disc. Use a lint-free cloth to wipe the hub area and remove any dirt or smudges that may be covering the control features.
4. If these steps do not fix the problem, try another LabelFlash disc.
11
CyberLink LabelPrint

Select a Label Type

The first step in creating a label is to select the type of label you want to print. You can select a label on the first page that appears when Cyberlink LabelPrint opens.
To select the type of label you want to print, do this:
1. Open Cyberlink LabelPrint.
2. Select the type of label you want to create from the following:
LightScribe: Burn a label directly onto the disc itself using
LightScribe technology.
LabelFlash: Burn a label directly onto the disc’s label side
and/or data side by using LabelFlash technology.
Disc Label: Print a label to stick directly onto a normal-sized
disc.
Note: Cyberlink LabelPrint supports “Epson Direct CD Printer” for Epson’s own printers. Please select this label type for printing directly on disc faces with compatible Epson printers.
MiniDisc Label: Print a label to stick directly onto a
MiniDisc.
Front Cover: Print the outside of the disc’s jewel case front
cover.
Back of Front Cover: Print the inside of the disc’s jewel case
front cover.
Disc Inlay: Print an inlay to insert into the bottom of the
disc’s jewel case, under the disc holder.
3. Click to advance to the Edit Disc Information page.
12
Creating Labels

Edit Disc Information

Add or edit disc information, such as a title, which will allow you to recognize the disc. Add or edit content list information to keep track of which files you have added to the disc. You can add or edit this information on the Edit Disc Information page.

Display Disc Information

Available information about both your disc and its contents is printed on your label. Cyberlink LabelPrint automatically generates content list information when you add items, though you can manually change this information if necessary.
To display disc information, do this:
1. Open Cyberlink LabelPrint and display the Edit Disc Information page.
2. Enter or modify your disc information:
Disc Title: Enter a disc title in this field.
Author: Enter the name of the disc’s author in this field.
Date: The current date is displayed by default. To change the
date, click the down-arrow, then select a new date.
3. Enter or modify your content list information.
4. Click to advance to the Edit Layout page.
13
CyberLink LabelPrint

Add Items to the Content List

Use this function to add items to the content list. Since Cyberlink LabelPrint can read MP3 file information, the process of adding MP3 information to the content list is automated. Adding other information must be done manually.
Add MP3s to the Content List
To add MP3s to the content list, do this:
1. Open Cyberlink LabelPrint and display the Edit Disc Information page.
2. Click . The Import dialog box opens.
3. Locate and import the files (in MP3 or M3U format) you want to
import. Items are inserted into the first available content list row.
Add Items to the Content List
To add items to the content list, do this:
1. Open Cyberlink LabelPrint and display the Edit Disc Information page.
2. Double-click in an entry box, then enter the content list information manually.
14
Creating Labels

Remove Items from the Content List

Use this function to remove items from the content list if you decide later on not to add them, or if you have added them in error.
To remove items from the content list, do this:
1. Open Cyberlink LabelPrint and display the Edit Disc Information page.
2. Click an item, then do the following:
Click to remove the selected item.
Click to remove all items.

Insert a Row in the Middle of the Content List

When you add new items, they are appended to the bottom of the content list by default. However, you can also insert an item in the middle of the content list.
To insert an item in the middle of the content list, do this:
1. Open Cyberlink LabelPrint and display the Edit Disc Information page.
2. Click the item above which you want to insert the new row.
3. Click to insert a blank row above the selected item.
4. Click , then import a new file.
15
CyberLink LabelPrint

Re-Order Items in the Content List

After you have added items to the content list, you may wish to modify the order in which they are listed.
To re-order items in the content list, do this:
1. Open Cyberlink LabelPrint and display the Edit Disc Information page.
2. Click an item, then do the following:
Click to move the item one position up.
Click to move the item one position down.

Modify Content List Information

Cyberlink LabelPrint automatically generates content list information when you add items to the content list. Some of this information may be outdated or missing. In such a case, you can modify the content list information to provide a complete and accurate content list.
To modify content list information, do this:
1. Open Cyberlink LabelPrint and display the Edit Disc Information page.
2. Double-click inside the information field that you want to modify, then enter the modified information.
16
Creating Labels

Edit a Label’s Layout

Cyberlink LabelPrint supports a wide variety of label templates, offering you a number of default options. You can further customize default layouts, allowing you to tailor the label to suit your specific requirements. You can design your label using a number of options, including layout templates, text options, and background images. By selecting a layout, modifying the fonts, and using a custom background image, you can create a more personalized disc label.

Layout-Editing Tools

You can use the following tools to create a label:
To ol Description
Inserts a horizontal text object.
Inserts a curved text object that follows the arc of the disc.
Inserts a background image.
Moves the selected object towards the top layer.
Moves the selected object towards the bottom layer.
Allows you to edit the selected text object.
Deletes the selected object.
17
CyberLink LabelPrint

Select a Label Layout

To select label layout options, do this:
1. Open Cyberlink LabelPrint and display the Edit Layout page.
2. Select a paper template from the drop-down box. (A paper
template allows you to print on any sheet of paper your printer supports.)
3. Select a layout style by doing one of the following:
Click or to scroll through the list of templates.
Click Select... under Layout Style to view the templates in a
dialog box.
Title mode option
Content mode option
Full mode options
The following layout options are available:
Title (first option): A simple title that allows you to identify a
disc. Use for routine or utility discs.
Content (second option): More complete information about
the contents of a disc. Use when you have several discs with the same title but different contents.
Full (all other options): A creative label of words and
graphics that uses most of the space on the label. Use for important or keepsake discs.
18

Add a Background Image

To add a background image to your label, do this:
1. Open Cyberlink LabelPrint and display the Edit Layout page.
2. Select a background image by doing one of the following:
Click or to scroll through the list of background
images.
Click Select... under Background Image to view the
background images in a dialog box. To open a custom image, click Browse..., then locate and open the image you want to use.
Click , then select a stretch mode. Stretch resizes the
image to the size of the label, but without keeping the image’s aspect ratio. (This option may result in image distortion.) Crop cuts off the portions of the image that fall outside the boundaries of the label. Fit resizes the image to the size of the label, keeping the image’s aspect ratio. Tile repeats the image to fit the label.
Creating Labels

Add or Modify Text

To add or modify text on your label, do this:
1. Open Cyberlink LabelPrint and display the Edit Layout page.
2. Click a text insertion button to insert a text box.
Click to insert text in a horizontal text box.
Click to insert text in a curved text box.
3. Highlight a text box, click , then modify the text.
4. Double-click a text box to open the standard Font dialog box, in
which you can modify the font size and style.
5. Drag the text box to reposition it on your label.
19
CyberLink LabelPrint

Add a Foreground Image

To add a foreground image to your label, do this:
1. Open Cyberlink LabelPrint and display the Edit Layout page.
2. Click . The Open dialog opens.
3. Locate and open the desired image.
4. Drag the image to reposition it on your label.

Re-Order Text and Images

To re-order text and images on your label, select the desired object, then do one of the following:
Click to move the selected object towards the top layer.
Click to move the selected object towards the bottom
layer.

Delete a Text Box or Image

To delete a text box or image, select the desired object, then click to delete.
20

Print a Label

Cyberlink LabelPrint offers a number of printing options, including printing directly on your disc using LightScribe technology and burning images on either side of your disc using LabelFlash.
You can print on one of the following media:
Plain paper: Allows you to print on any sheet of paper your
printer supports.
Label paper: Provides labels for easy printing.
Ink-Jet Printable discs: Requires special Epson printer and
compatible disc.
Directly onto your disc: Special LightScribe burning drive or
LabelFlash burning drive let you print your label directly on the disc.

Display Printer Options

Creating Labels
Display printer options in order to set up your printing device to suit your project.
To display printer options, do this:
1. Open Cyberlink LabelPrint and display the Print page.
2. Select your printer device.
Click Properties to open the Print Setup dialog box.
21
CyberLink LabelPrint

Print a Label on a Printer

You can print any type of label on a printer, using either plain paper or on label paper. The Print page allows you to select both your template and your printer.
Note: To select a new label type to print, you must return to Step 1 in the label creation process. For more information, see Select a Label Type on p.12.
To print a label on a printer, do this:
1. Open Cyberlink LabelPrint and display the Print page.
2. Select the Printer option.
If multiple printers are available, select the desired printer
from the drop-down menu.
3. Enter the number of copies you want to print.
4. Select your paper template from the drop-down menu, if
necessary.
To print on plain paper, select Plain Paper (A4).
If the sample template contains two available labels,
reflecting the two labels on the paper template, click the label you would like to print on.
Note: The arrow next to the template sample indicates the proper direction to insert your paper into your printer.
5. Click to begin printing your label.
22

Print a Label directly on a disc face

With Epson printers, colorful labels can be printed directly on compatible disc faces.
Note: Please make sure that your discs are Ink-Jet Printable CD-R and DVD-R Recordable media.
Note: To select a new label type, you must return to Step 1 in the label creation process. For more information, see Select a Label Type on p.12.
To print disc faces directly, do this:
1. Open Cyberlink LabelPrint and display the Print page.
2. Select the Printer option.
If multiple printers are available, select the compatible Epson
printer from the drop-down menu.
3. Enter the number of copies you want to print.
4. Select Epson Direct CD-DVD Printing as your template from
the drop-down menu.
Creating Labels
Note: The arrow next to the template sample indicates the proper direction to insert your disc into your printer.
5. Click to begin printing your label.
23
CyberLink LabelPrint

Burn a Disc Label Using LightScribe

LightScribe Direct Disc Labeling is a disc labeling technology that enables you to burn disc labels simply by flipping the disc over and putting them back in the same disc drive that burned your data. LightScribe technology combines the CD or DVD drive of your computer with specially coated discs to produce precise, silkscreen­quality labels.
Note: Using LightScribe, you can only print disc labels. You cannot print other types of labels using LightScribe technology.
To burn a disc label using LightScribe, do this:
1. Open Cyberlink LabelPrint and display the Print page.
Note: You must have selected LightScribe as your label type. See Select a Label Type on p.12.
2. Click . The LightScribe wizard opens.
3. Select a quality level:
Best (Recommended) - Provides the sharpest contrast with
the longest burn time. Use Best level for important business transactions, gifts, and personal keepsakes.
Normal - Provides moderate burn time with good contrast.
Use Normal level for professional labels.
Draft - Provides the fastest burn time with lowest contrast.
Use Draft level for utility labels.
4. Click Preview to see how your LightScribe disc might appear after labelling.
24
Note: Text or images that extend beyond the editable region are cropped when printing. If your label is cropped, you may select a different layout style on the Edit Layout page. See Edit a Label’s Layout on p.17.
Creating Labels
5. Click Next to begin burning your label. The label burn time varies with the amount of information contained on the label, the placement of the information on the label, the contrast level selected, the LightScribe disc used, and the drive.
Note: If the special 'barcode' in the middle of a LightScribe disc on the label (not data) side becomes dusty or dirty, the disc may not be detected as a LightScribe disc. If this happens, gently clean the barcode with a tissue, then try again.
25
CyberLink LabelPrint

Burn a Disc Label Using LabelFlash

LabelFlash is a disc labeling technology that enables you to burn labels on either side of the disc. LabelFlash technology combines the CD or DVD drive of your computer with specially coated discs to produce precise, glossy-finish labels.
To burn a disc label using LabelFlash, do this:
1. Open Cyberlink LabelPrint and display the Print page.
Note: You must have selected LabelFlash as your label type. See Select a Label Type on p.12.
Note: The side, which will be burned, should be face down in the drive.
2. Click . The LabelFlash wizard opens.
3. Enter desired Inner and Outer printing range. Select suitable Rotation and Contrast.
4. Click Preview to see how your disc might appear after labelling.
Note: Text or images that extend beyond the editable region are cropped when printing. If your label is cropped, you may select a different layout style on the Edit Layout page. See Edit a Label’s Layout on p.17.
5. Click Next to begin burning your label. The label burn time varies with the amount of information contained on the label, the placement of the information on the label, the contrast level selected, rotation speed, the disc used, and the drive.
26

Technical Support

This chapter contains technical support information. Before asking CyberLink for technical support, please refer to this user's guide or online help for information. It contains all the information you generally need to use the program. You may also find answers quickly by contacting your local distributor/dealer.
If your problem is not resolved using the above methods, please feel free to contact CyberLink for technical support.
27
CyberLink LabelPrint

Web Support

Solutions to your problems are available 24 hours a day and at no cost on our Web sites:
support.cyberlink.com
www.cyberlink.com
In addition to frequently asked questions, we also provide troubleshooting techniques, the latest in product news, and other relevant information.
28
Technical Support

Telephone Support

You are welcome to call the CyberLink's Technical Support Hotline at the phone number listed below during hours of availability:
CyberLink Technical Support Information
Support Phone Number
Support Hours 9:00 a.m. -5:00 p.m. Taiwan time (GMT +8:00)
Note: Technical support is only offered to registered users. Please be sure to have your calling.
When calling for support, please have your computer ready and provide us with the following information:
your registered CD-key
the product version
the version of Windows installed on your system
the hardware devices on your system and their specifications
the wording of any warning messages that were displayed
(You may want to write this down or make a screen capture.)
a detailed description of the problem and under what
circumstances it occurred
(886) 2-8667-1298
Monday to Friday, excluding holidays
CD-key (located on your CD case) on hand when
29
CyberLink LabelPrint
30

Index

A
add a background image 19 add a foreground image 20 add items to content list 14 add MP3 items to content list 14 add text 19
content list
modify information
16
D
delete text or images 20 disc information, edit 13 disc label
burn using LabelFlash burn using LightScribe 24 draw outline 4
draw outline of the disc label 4
26
E
B
background image, add 19 burn a disc label using LabelFlash 26 burn a disc label using LightScribe 24 burning drive, select 5
C
calibrate your printer 4 CD key, location of 29 configuration options 4 Content layout option 18
edit
content information disc information 13 layout 17
16
F
foreground image, add 20 Full layout option 18
31
CyberLink LabelPrint
G
general settings 4
H
hide item number 4
I
images
delete
20
re-order 20 insert an item within content list 15 items
add MP3
add to content list 14
insert within content list 15
remove from content list 15
re-order in content list 16
14
types 12
LabelFlash
use to print disc labels LabelFlash settings 5 layout options, select 18 layout, edit 17 layout-editing tools 17 LightScribe 21
drive, select 5
use to print disc labels 24 LightScribe settings 5
26
M
media available for printing on 21 minimum system requirements 8 modify text 19 MP3, add information to content list 14
N
navigate in LabelPrint 3
L
label
draw outline edit layout 17 print on a printer 22, 23
32
4
O
outline of disc label, draw 4
Index
P
paper templates 21 phone number, tech support 29 plain paper 21 preview your disc 26 preview your LightScribe disc 24 print
available media disc label using LabelFlash 26 disc label using LightScribe 24 label on a printer 22, 23
printer
calibration print a label on 22, 23 select 21
21
4
Q
quality level for LightScribe 24
R
S
select
label type
LightScribe burning drive 5 select label layout options 18 settings
general
LabelFlash 5
LightScribe 5
printer calibration 4 system requirements 8
12
4
T
technical support 27 text
add or modify
delete 20
re-order 20 Title layout option 18 tools for editing label layout 17 types of labels 12
19
registration 6 remove items from content list 15 re-order items in content list 16 re-order text and images 20
U
upgrade your software 7
33
CyberLink LabelPrint
W
Web sites for technical support 28
X
X Offset 4
Y
Y Offset 4
34
Loading...