Electric Dryer
CDE-8000GW/GR/GS/GBL
PRODUCT FEATURES
■ OUTSTANDING PERFORMANCE
Besides the large capacity, you can benefit from faster drying time, quiet operation, and energy efficiency.
■STAINLESS STEEL DRUM
Stainless steel drum resists rust.
■DIGITAL FABRIC CARE
Multi-Level temperature control takes better care of your clothes.
■EASE OF USE
An entire selection of user-friendly functions make operating the dryer
easier.
■ADAPTABLE CONTROL
The control panel can be in the top or bottom position to allow easy access whether side-by-side washer
and stack on a pedestal.
■ONE TOUCH SELECTIONS
To choose an option, press its button once. No need to press buttons multiple times to scroll through a list
of options.
What are Sensor Dry and Time Dry?
Your dryer provides sensor drying and time drying programs.
Sensor Dry
The dryer senses the dampness of the laundry and automatically determines the heat level and operation time. You might see a sudden increase or decrease in operation time if the sensor determines more or less drying is required. This is not a malfunction.
Time Dry
Use TIME DRY to select heat level and drying time manually. This can be used if clothes are not as dry as you like them at the end of the cycle. Use TIME DRY for heavy and bulky items and thick work.
TABLE OF CONTENTS |
|
PART 1. SPECIFICATIONS............................................................................................................................ |
2 |
PART 2. IMPORTANT WARRANTY AND SAFETY INSTRUCTIONS ......................................................... |
3 |
PART 3. INITIAL STEPS FOR INSTALLING YOUR DRYER........................................................................ |
6 |
PART 4. ACCESSORIES INSTALLATION .................................................................................................. |
13 |
PART 5. ELECTRICAL REQUIREMENTS FOR ELECTRIC DRYER ........................................................ |
14 |
PART 6. USER - MAINTENANCE INSTRUCTIONS ................................................................................... |
20 |
PART 7. OPERATING YOUR DRYER ......................................................................................................... |
22 |
PART 8. TROUBLESHOOTING GUIDE....................................................................................................... |
29 |
DAEWOO DRYER LIMITED WARRANTY................................................................................................... |
32 |
PART 1 SPECIFICATIONS
■Type : Electric Dryer
■Rating : Please refer to the rating label regarding detailed
information.
■Size : 27 x 32.4 x 40.2 inches
■Capacity : IEC 7.3 cu.ft. (22.9 lb)
■Weight : 128 Ibs (58.5 kg)
Specifications are subject to change by manufacturer.
■ Accessories
Dryer Rack |
Pedestal Purchased Separately |
Design of pedestals is subject to change without manufacturers notice.
2
PART 2 IMPORTANT WARRANTY AND SAFETY INSTRUCTIONS
[SEEKING WARRANTY SERVICE]
The warranty information for your dryer is located at the end of this manual. Warranty Service is available by contacting the nearest DAEWOO
Service Center. If this product is installed and operated according to the instructions in this manual, DAEWOO will repair or replace any parts defective in material or workmanship throughout the warranty period, beginning with the date of purchase.
WARNING!
For your safety, the recommendations in this manual must be followed. To reduce the risk of fire or explosion, electric shock or to prevent property damage, personal injury, or death
when using your appliance follow basic precautions.
Warranty Restriction :
If the dryer is subjected to other than single family use, all warranty coverage is effective for only 90 days.
You will need the complete model and serial number when requesting warranty service. A proof of purchase is also required.
Use the space below to record the model number and serial number of your new DAEWOO dryer.
Model Number
Serial Number
Date of Purchase
Staple your receipt here for convenience when contacting service.
3
[IMPORTANT SAFETY INSTRUCTIONS]
WARNING!
To help reduce any risk of electric shock, fire, or other personal injury or property damage when using your Appliance, please exercise care and follow basic safety precautions, including the following:
1)Read all instructions before using the appliance.
2)Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances, as they give off vapours that could ignite or explode.
3)Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children.
4)Before the appliance is removed from service or discarded, remove the door to the drying compartment.
5)Do not reach into the appliance if the drum is moving.
6)Do not install or store this appliance where it will be exposed to the weather.
7)Do not tamper with controls.
8)Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that you understand and have the skills to carry out.
9)Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials.
10)Clean lint screen before or after each load.
11)Keep area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint, dust, and dirt.
12)The interior of the appliance and exhaust duct should be cleaned periodically by qualified service personnel.
13)Do not place items exposed to cooking oils in your dryer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.
14)Do not use fabric softners or products to eliminate static unless recommended by the manufacturer of the fabric softner or product.
15)This dryer is designed only for residential use.
16)Ensure pockets are free from small irregularly shaped hard objects, foreign material, etc. ie. coins, knives,pins, etc. These objects could damage your dryer.
17)Do not wash clothing with large buckles, buttons, or other heavy metal or solid decorative things.
[SAVE THESE INSTRUCTIONS]
USING INSTRUCTIONS
1)Do not overload the drum, that may cause poor drying and wrinkling.
2)Do not over dry fabrics such as knitted fabrics and flannel.
3)Do not dry items such as elastic bands, plastics,rubberized items, or sneakers that might melt or ignite in the dryer.
4)Check the lint filter is in place.
5)Make sure the laundry is not caught when the door is closed to prevent fabric damage.
6)Check the filter every cycle because a clogged filter causes fire hazardous condition and affects the dryer efficiency.
7)When cleaning the surface of the drum, you should use a non-abrasive stainless steel cleaner.
8)To prevent a short circuit or penetrating moisture, make sure the lamp cover is firmly closed.
9)Do not sit on top of the dryer.
NOTE: Because of continuing product improvements, Daewoo reserves the right to change specifications without notice. For complete details, see the Installation Instructions packed with your product before selecting cabinetry, making cutouts, or beginning installation.
4
[GROUNDING INSTRUCTIONS]
A. For a grounded, cord-connected appliance:
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.
This appliance must be equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
WARNING!
Improper connection of the equipment grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the appliance is properly grounded.
Do not modify the plug provided with the appliance. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.
B. For a permanently connected appliance:
This appliance must be connected to a grounded metal, permanent wiring system; or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the appliance.
5
PART 3 INITIAL STEPS FOR INSTALLING YOUR DRYER
The following instructions will guide you through the initial steps of setting up your dryer.
Please note that every section of this manual provides important information regarding the preparation and use of your dryer, and it is important that you review this entire manual before proceeding with any installation or use. More detailed instructions concerning electrical connections, gas connections, and exhaust requirements are provided in other parts of this manual.
STEP 1. Positioning the Dryer.
Choose a location with a solid floor for your dryer.
Place the dryer in the desired location and make sure that it has the required clearances shown below.
44.3"
(112.5cm)
40.2"
(102.1cm)
27" 
32.4" (68.6cm) (82.3cm)
*Most installations require a minimum 5 1/2 (5.5) inches.
(14 cm) clearance behind the dryer for the exhaust vent with elbow.
NOTE:
Leveling legs should be secured.
All four legs should be stably placed on a solid and even floor.
If dryer is not level, laundry may not tumble properly and sensor will not detect humidity information accurately. When leveling, please be cautious not to injure your fingers and toes.
If you install the dryer on the optional pedestal, it is necessary to level with the pedestal leveling legs.
6
Minimum clearances on above, behind, and sides of the unit, as shown below, are required.
Those required minimum clearances are set forth in the picture below. Please keep the following instructions in mind when installing in a closet or recessed area:
•Consider allowing additional clearance for installation and servicing.
•Wall, door and floor molding may necessitate additional clearances.
•Additional inches of clearance are recommended to reduce noise while operating.
•Consider the space needed for companion appliances.
•For closet installations, the picture below shows the minimum required ventilation openings for the door. A louvered door with comparable ventilation openings is also acceptable.
14" max |
18" |
(35.6cm) |
(45.72cm) |
ventilation hole
ventilation hole
|
|
|
|
|
|
32.4" |
|
|
|
|
|
|
|
|
|
|
|
27" |
|
|
|
|
1" |
|
|
|
|
(82.3cm) |
|
1" |
0" |
|
|
|
(68.6cm) |
|
0" |
||||||||
(2.54cm) |
|
|
|
|
|
(2.54cm) |
(0cm) |
|
|
|
|
|
(0cm |
|||||||||
Closet Door |
|
Closet Side View |
|
|
|
|
|
|
|
|
Closet-Front View |
|
|
|
||||||||
Once in position, adjust the leveling legs of the dryer until it is level from left to right and front to back.
The leveling legs must remain firmly on the floor and the dryer should not rock. The maximum slope of the dryer from left to right or front to back should not exceed 2.5 cm (1 inch). If the dryer is not level, and if the slope exceeds 2.5 cm (1 inch), a load may not tumble properly and internal sensors may malfunction.
NOTE:
Other sections of this manual also provide important information concerning the placement of and clearances for your dryer.
Please review this entire manual before proceeding with any installation.
7
STEP 2. Connecting the Exhaust System
WARNING!
•To reduce the risk of fire this appliance MUST BE EXHAUSTED OUTDOORS.
•The appliance should not be exhausted into a chimney, a wall, a ceiling, or a concealed space of a building.
•Only rigid or flexible metal duct should be used, for exhausting.
•Do not use plastic or thin foil duct.
•Failure to follow these instructions can result in death or fire.
•Clean old ducts before installing this dryer.
WARNING!
The exhaust must be vented to the outside.
Improper taping and incorrect installation will cause dryer malfunction.
In addition to the following warnings, please refer to manual section on Exhaust Requirements and Maintenance.
IMPORTANT: To reduce the risk of fire, combustion, and gas accumulation, the dryer must be vented to the outdoors. Please follow the instructions (and all others in this manual) very carefully.
•Do not use plastic or thin foil duct.
•Use 4" (10.2 cm) diameter rigid or semi-rigid metal duct (NOTE! Venting materials are not supplied with the dryer, and you should obtain the venting materials necessary for proper installation)
•Position the dryer such that the exhaust duct run is as short as possible.
Clean old ducts before installing this dryer
•The male end of each section of exhaust duct must point away from the dryer.
•Use as few elbow joints as possible.
•Use duct tape on all duct joints.
•Insulate ductwork that runs through unheated areas in order to reduce condensation and lint build-up on pipe walls.
PLEASE BE AWARE THAT FAILURE TO EXHAUST THE DRYER CORRECTLY WILL VOID THE DRYER’S WARRANTY.
8
■ ALTERNATE EXHAUST DIRECTIONS
1. Remove screw and exhaust duct.
2-2. Reconnect the new duct[8.66 inch(22cm)] to the blower housing, and fixing the duct to the base.
3-2. Insert this assembly elbow first through the hole in the dryer and push the female end of the elbow onto the male end of the blower output shaft. Tape the joint.
9
STEP 3. Electrical Plug Connections
Following steps are several warnings and instructions concerning making the electrical connection for electric dryers.
More detailed information concerning the electrical connection is provided in the manual section entitled Electrical Requirements for Electric Dryer.
It is important that you thoroughly review that section and the remainder of this manual, before taking any steps to install or use this dryer.
1.Use only a new UL listed No. 10 (copper wire only) three or four conductor power supply cord kit rated 240 Volts (minimum) 30 Amperes and labeled as suitable for use in a clothes dryer.
2.A four-wire cord is required for manufactured (mobile) home installations and where local codes do not allow grounding of this appliance through neutral.
3.Electrical Plug Connections.
4.For additional instruction on connecting the dryer to an electrical power source, please refer to this manual's section on Electrical Requirements and Electric Dryer.
WARNING!
•Use a new UL listed 30 amp power supply cord.
•Use a UL approved strain relief.
•Disconnect power before making electrical connections.
•Connect neutral wire (white or center wire) to center terminal.
•Ground wire (green or bare wire) must be connected to green ground connector.
•Securely tighten all electrical connections
•See installation instructions for complete instructions.
•Failure to do so may result in fire or electrical shock.
10
Loading...