Comnet CNGE3FE8MS, CNGE3FE8MSK, CNGE3FE8MSPoE, CNGE3FE8MSPoEHO, CNGE3FE8MSPoEHOK Quick Start Guide

QUICK START GUIDE

CNGE3FE8MS[POE][HO]

Environmentally Hardened Managed Ethernet Switch
3 GE SFP + 8 FE Electrical Ports with Optional 30 or 60 Watt PoE

This guide serves the following
ComNet Model Numbers:

CNGE3FE8MS

CNGE3FE8MSPOE

CNGE3FE8MSPOEHO

The ComNet CNGE3FE8MS[POE][HO] has three 100/1000Base-FX SFP ports and eight
10/100Base-T(X) ports. Two of the SFP ports support 2.5 Gbps SFPs for high speed
communication in bandwidth intensive applications. All SFP ports utilize ComNet
SFP modules for fiber and connector type and distance. The IEEE802.3-compliant unit
offers multiple Ethernet redundancy protocols (MSTP/RSTP/STP/ERPS (G.8032)) which
protect your applications from network interruptions or temporary malfunctions by
redirecting transmission within the network. The switch provides advanced IP-based
management that can limit the maximum bandwidth for each connected IP device,
allowing the user to adjust usage. Two models are available which supply Power
over Ethernet (PoE). The CNGE3FE8MSPOE model provides eight electrical ports
supporting up to thirty watts of power. On the CNGE3FE8MSPOEHO model, four
of the eight PoE ports can support up to sixty watts of PoE power. All PoE ports are
IEEE802.3at compliant.

Rev. 2.3.17

QUICK START GUIDE CNGE3FE8MS[POE][HO]

Contents

Regulatory Compliance Statement 3

Warranty 3

Disclaimer 3

Safety Information 3

Hardware Installation 4

Installing the Switch on DIN-Rail 4

Wall Mounting Installation 6

Hardware Overview 7

Front Panel LEDs 8

WEB Management 8

TECH SUPPORT: 1.888.678.9427

QSG_CNGEFE8MS[POE][HO]_REV– Rev. 2.3.17 PAGE 2

QUICK START GUIDE CNGE3FE8MS[POE][HO]

Regulatory Compliance Statement

Product(s) associated with this publication complies/comply with all applicable regulations. Please
refer to the Technical Specifications section for more details.

Warranty

ComNet warrants that all ComNet products are free from defects in material and workmanship
for a specified warranty period from the invoice date for the life of the installation. ComNet will
repair or replace products found by ComNet to be defective within this warranty period, with
shipment expenses apportioned by ComNet and the distributor. This warranty does not cover
product modifications or repairs done by persons other than ComNet-approved personnel, and
this warranty does not apply to ComNet products that are misused, abused, improperly installed,
or damaged by accidents.

Please refer to the Technical Specifications section for the actual warranty period(s) of the
product(s) associated with this publication.

Disclaimer

Information in this publication is intended to be accurate. ComNet shall not be responsible for its
use or infringements on third-parties as a result of its use. There may occasionally be unintentional
errors on this publication. ComNet reserves the right to revise the contents of this publication
without notice.

Safety Information

» Only ComNet service personnel can service the equipment. Please contact ComNet Technical

Support.

» The equipment should be installed in locations with controlled access, or other means of

security, and controlled by persons of authority.

TECH SUPPORT: 1.888.678.9427

QSG_CNGEFE8MS[POE][HO]_REV– Rev. 2.3.17 PAGE 3