INSTALLATION AND OPERATION MANUAL
CNMC[2]SFP[POE][/M] Series
10/100/1000MBPS ETHERNET MEDIA CONVERTERS WITH 100FX AND 1000FX SUPPORT
This manual serves the following ComNet Model Numbers:
CNMCSFP/M
CNMCSFPPOE/M
CNMCSFP
CNMC2SFP
The ComNet™ CNMC[2]SFP[POE][/M] Series products convert one or two Ethernet signals from electrical to optical and optical to electrical. The devices accept a 10/100 or 1000Mbps electrical input and convert this to a 100/1000Mbps optical output and the 100/1000Mbps optical input back to the 10/100/1000Mbps electrical output. The products in this series use either one or two optical fibers, depending upon the selection of sold-separately SFP optical module. The CNMCSFPPOE/M additionally supplies IEEE802.3at (30W) compliant Power over Ethernet (PoE) to the remote end.
The CNMC[2]SFP[POE][/M] Series is designed to operate in harsh industrial environments with no electrical or optical adjustments required (Plug and Play).
The optical data rate of 100FX or 1000FX is selected by a dip switch. See Figure 9 on Page 6 for dip switch settings. “Auto-Negotiating” is supported on the copper interface side.
LED indicators are provided for confirming equipment operating status. See Figure 10 on Page 6 for LED indicator descriptions.
See Figures 1 – 11 for complete installation details.
The CNMCSFP/M and CNMCSFPPOE/M are supplied in a surface mount “Mini” package. The ComFit units in this series can be surface mounted or installed in the ComNet card cages. See Figures A and B on Page 7 for mounting instructions.
Rev. 11/07/13
INS_CNMC[2]SFP[POE][/M]_REV– 06/06/12 PAGE 1
INSTALLATION AND OPERATION MANUAL |
CNMC[2]SFP[POE][/M] Series |
|
|
FIGURE 1 – CNMCSFP/M SMALL SIZE UNIT
|
|
CNMCSFP/M |
|
|
OPTICAL FIBER |
|
MULTI RATE |
LINK/ACT |
|
|
MEDIA CONVERTER |
|||
DETERMINED BY |
FIBER |
1000 FX |
||
|
||||
SELECTION OF |
TM |
|||
SFP MODULE |
|
100 FX |
||
|
|
|||
|
|
|
POWER |
|
CAT5e/6 |
COPPER |
|
~/- |
|
|
|
|
~/+
BLACK
BLACK WITH WHITE STRIPE
Surface Mount Power:
9 – 24 VDC @ 200mA max. OR
24 VAC @ 200mA max.
FIGURE 2 – CNMCSFP/M SMALL SIZE UNIT
FRONT PANEL |
REAR PANEL |
TECH SUPPORT: 1.888.678.9427
INS_CNMC[2]SFP[POE][/M]_REV– 06/06/12 PAGE 2
INSTALLATION AND OPERATION MANUAL |
CNMC[2]SFP[POE][/M] Series |
|
|
FIGURE 3 – CNMCSFPPOE/M SMALL SIZE UNIT
OPTICAL FIBER
DETERMINED BY
SELECTION OF
SFP MODULE
CAT5e/6 |
BLACK |
IEEE802.3at |
|
(30W) PoE |
BLACK WITH WHITE STRIPE |
|
|
|
Surface Mount Power: |
|
48 – 57 VDC @ 0.85A |
FIGURE 4 – CNMCSFPPOE/M SMALL SIZE UNIT
FRONT PANEL |
REAR PANEL |
TECH SUPPORT: 1.888.678.9427
INS_CNMC[2]SFP[POE][/M]_REV– 06/06/12 PAGE 3