Environmentally Hardened Managed Ethernet Switch with
(7) 10/100TX + (3) 10/100/1000TX RJ45 or 100/1000 FX SFP* Ports
CNGE3FE7MS2
73FLEXIBILIT YUPLINKSHARDENED
The ComNet™ CNGE3FE7MS2 Managed Ethernet Switch provides robust
transmission of (7) 10/100 BASE-TX and (3) 10/100/1000TX or 100/1000FX combo
ports, of gigabit Ethernet data. Unlike most Ethernet switches, these environmentally
hardened units are designed for direct deployment in difficult out-of-plant or
roadside operating environments, and are available for use with either conventional
CAT-5e copper or optical transmission media. Diverse media selection allows for easy
implementation of point-to-point, linear add-drop, drop-and-repeat, star, or true selfhealing ring and mesh network system architectures. The 7 electrical ports support
the 10/100 Mbps Ethernet IEEE 802.3 protocol, and auto-negotiating and autoMDI/MDIX features are provided for simplicity and ease of installation. 3 ports are
10/100/1000 configurable for copper or fiber media for use with multimode or single
mode optical fiber, selected by optional SFP modules. These network managed layer
2 switches are optically (100/1000 BASE-FX) and electrically compatible with any IEEE
802.3 compliant Ethernet devices. Plug-and-play design ensures ease of installation,
and no electrical or optical adjustments are ever required. The CNGE3FE7MS2
incorporates LED indicators for monitoring the operating status of the managed
switch and network. These units are DIN-rail or wall mountable.
FEATURES
› Environmentally hardened for direct deployment in difficult
unconditioned out-of-plant and roadside installations
› Tested and certified by an independent laboratory for full
compliance with the environmental requirements (ambient
operating temperature, mechanical shock, vibration, humidity
with condensation, high-line/low-line voltage conditions
and transient voltage protection) of NEMA TS-1/TS-2 and
CALTRANS Traffic Signal Control Equipment Specifications
› Compliant with EN60950-1 and UL Class 1, Division 2,
Groups A, B, C and D for Hazardous Locations
› Extended ambient operating temperature range:
-40˚ C to +75˚ C (Functional to 85ºC)
› 10/100 BASE-TX and 100/1000 BASE-FX compatible
› Flexible optics configuration via SFP plug-in modules
› DIN rail or wall mountable mounted
› Redundant power supply compatibility reduces possibility
of single-point-of-failure for highest possible reliability
› Fully configurable through web-based or SNMP network
management
› IGMP Snooping V1/V2 for multicast filtering and IGMP Query
V1/V2
› Port based VLAN (IEEE 802.1Q)
› Rapid Spanning Tree protocol (IEEE 802.1W)
› Power Supply Included
› Lifetime Warranty
APPLICATIONS
› ITS Traffic Signalization & Surveillance/Incident Detection
Networks
› Industrial and Factory Automation
› Integrated IP-Video and Data Transmission Networks
› Industrial Security Access Control Systems
* Small Form-Factor Pluggable Module. Sold separately.
Environmentally Hardened Managed Ethernet Switch with
(7) 10/100TX + (3) 10/100/1000TX RJ45 or 100/1000 FX SFP Ports
Bandwidth Control Support ingress packet filter and egress packet limit. The
egress rate control all of the packet types and the limit rates are
100K-250Mbps. Ingress filter packet type combination rules
are Broadcast/Multicast/Unknown Unicast packet, Broadcast/
Multicast packet, Broadcast packet only and all of packet. The
packet filter rate can be set from 100K-250Mbps.
Flow Control Support Flow Control for Full-duplex and Back Pressure from
Half-duplex
System Log Support System log record and remote system log server
SMTP Support SMTP Server and 6 e-mail accounts for receiving event
alert
Relay Alarm Provides one relay output for port breakdown, power fail.
Alarm Relay current carry ability:
1A @ DC24V
DIDO DO: When disconnection of the specific port was detected, DO
will activate the signal LED to alarm.
DI: Integrate critical sensors: 2 groups of digital inputs. DI
can integrate the sensors into the auto alarm system and
transfer the alarm information to IP network with email and
SNMP.
SNMP Trap Up to 3 Trap stations. Cold start, Port link up, Port link down,
Authentication Failure, Private Trap for power status, Port Alarm
configuration, Fault alarm, X-Ring topology change.
DHCP Provide DHCP Client/ DHCP Server and IP Relay
DNS Provide DNS client feature and support Primary and Secondary
DNS server
SNTP Support SNTP to synchronize system clock in Internet
Firmware Update, configuration backup and restore
Support TFTP firmware update, system configure backup and
restore
If Alias Each port allows importing 128 bit of alphabetic string of words
Single Mode: 9/125µm
Requires selection of sold-separately SFP Modules. See ComNet
data sheet “SFP Small Form-Factor Pluggable Modules” for
number and description of SFP modules.
Protocol CSMA/CD
LED 10/100TX: Link/Activity (Green)
Full Duplex/Collision (Yellow)
Giga Copper: Link/Activity (Green)
Speed: 1000Mbps (Green)
SFP: Link/Activity (Green)
Power (Green), Power 1 (Green),
Power 2 (Green), Fault (Red),
Master (Green)
Accessories24VDC Plug in Power Supply (12VDC in some regions), 90-264VAC, 50/60Hz (Included)
PS24-1A – 24VDC DIN Rail Power supply (sold separately)
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J. In a continuing effort to
improve and advance technology, product specifications are subject to change without notice.
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.