Comnet CNGE2MCPOEM Specsheet

10/100/1000 Mbps Ethernet 2 Port Media Converter + PoE

CNGE2MCPOEM

1 OR 2CONVERTER802.3atHARDENED FLEXIBILIT YINCLUDED

The ComNet™ CNGE2MCPOEM Ethernet 2 port media converter is designed
to transmit and receive 10/100/1000 Mbps data over optical fiber through user
selectable SFP options. The CNGE2MCPOEM transmits and receives a single
channel of Ethernet data. It also supports IEEE 802.3at Class 1 – 4 as power sourcing
equipment (PSE) with up to 30 Watts of operating power to the remote powered
device. It requires the ordering of sold-separately interchangeable SFP modules for
fiber type, distance and connectors. Its electrical interface will Auto-Negotiate to a
10 Mbps, 100 Mbps or 1000 Mbps Ethernet rate without any adjustments. The optical
interface operates at 1000 Mbps. The CNGE2MCPOEM is environmentally hardened
to operate in extreme temperatures. LED indicators are provided for confirming
equipment operating status.

FEATURES

› 10/100/1000 Mbps Ethernet

• 10/100/1000 BASE-T/TX electrical port

• 1000 BASE-FX optical port

› Electrical port supports Auto-Negotiation for 10 Mbps,

100 Mbps or 1000 Mbps, full duplex or half duplex data.

› Optical port supports 1000 Mbps full duplex data

› IEEE 802.3at Class 1 – 4 Power over Ethernet (PoE)

› Automatic MDI/MDI-X crossover

› Distances up to 120 km with optional SFPs

› Designed to meet full compliance with the environmental

requirements (ambient operating temperature, mechanical
shock, vibration, humidity with condensation, high-line/low­line voltage conditions and transient voltage protection) of
NEMA TS-1/TS-2 and the Caltrans Specification for Traffic
Signal Control Equipment.

› Uses interchangeable SFP for fiber type, distance

and connector (Ordered separately)

› Voltage transient protection on all power and signal input/

output lines provides unconditional protection from power
surges and other voltage transient events.

› No in-field optical adjustments required

› LED Indicators

› IEEE 802.3 compliant

APPLICATIONS

› 10/100/1000 Mbps Ethernet Media Converter

› High Speed Computer Links

* Small Form-Factor Pluggable Module. Sold separately.

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

CNGE2MCPOEM

SPECIFICATIONS

10/100/1000 Mbps Ethernet 2 Port Media Converter + PoE

Data

Data Interface Ethernet
Data Rate 10/100/1000 Mbps

IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Port/Full
Duplex Optical Port

Electrical 30W (max)

Fibers¹ SFP Dependent

Fiber Connectors Requires selection of sold-separately SFP modules.

See ComNet data sheet for number and description
of SFP modules

Connectors

Power Terminal Block
Electrical RJ45

PoE pin assignment RJ45 port #1 supports IEEE 802.3at Class 1 – 4

End-point Positive (VCC+): RJ45 pin 1, 2
Negative (VCC-): RJ45 pin 3, 6

Indicating LEDs - Optical Link/Data Activity

- Power

- PSE

ORDERING INFORMATION

Power

Operating Power 48VDC @ 1A

Electrical & Mechanical

Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size 4.1 × 3.7 × 1.1 in (10.4 × 9.4 × 2.8 cm)
Shipping Weight <2 lbs./0.9 kg

Environmental

MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)²

[1] Multimode fiber needs to meet or exceed fiber standard ITU-T G.651.

Single mode fiber needs to meet or exceed fiber standard ITU-T G.652

Part Number Description

CNGE2MCPOEM 2 Port 10/100/1000 Mbps Ethernet Media Converter with high power Power over Ethernet (PoE)

Included 48 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)

Options [2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)

DIN-Rail Mounting Adaptor Plate Kit - With Mounting Hardware (Optional, order model DINBKT1)

NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J. In a continuing effort to improve
and advance technology, product specifications are subject to change without notice.

TYPICAL APPLICATION

LEGEND

E E

CNGE2MC

w/ SFP-6

CNGE2MCPOEM

w/ SFP-6

10/100T(X) ETHERNET

10/100T(X) + PoE

OPTICAL FIBER

3 CORPORATE DRIVE

8 TURNBERRY PARK ROAD

© 2013 Communic ation Netwo rks. All Right s Reserv ed. “ComNet ,” the “Com Net Logo,” “Net Wave” and the “Ne tWave Logo” ar e registere d trademark s of Communicat ion Networ ks.

|

DANBURY, CONNECTICUT 06810

|

GILDERSOME

|

MORLEY

|

|

USA

T: 203.796.5300

|

LEEDS, UK LS27 7LE

|

F: 203.796.5303

|

T: [phone]

|

TECH SUPPORT: 1.888.678.9427

|

F: [phone]

|

[e-mail]

|

[e-mail]

05 Dec 2013