Comnet CNGE2FE4SMS, CNGE2FE4SMSPoE, CNGE2FE4SMSPoEHO User Manual

INSTALLATION AND OPERATION MANUAL

CNGE2FE4SMS[POE][HO]

10/100/1000 MBPS DROP/INSERT/REPEAT
GIGABIT UPLINK SWITCH WITH OPTIONAL POE+

The ComNet CNGE2FE4SMS[POE][HO] is a six-port self-managed switch with uplink
management functionality and provides 4 copper ports operating at 10/100 Mbps
and two Gbps optical SFP ports. It is designed to combine four electrical ports and
one Gbps SFP port into one optical SFP port. The CNGE2FE4SMS[POE][HO] SFP
ports forwards this data to the next network device or can be configured for drop
and insert operation. The CNGE2FE4SMS[POE][HO] uses ComNet SFPs for connector
and distance options. There is no programming required to use this product. The
ComNet CNGE2FE4SMS[POE][HO] comes pre-programmed, preventing network
video flooding with dip switch selection of fiber port 6 as uplink or as an unmanaged
switch. Ports 1 to 4 can supply up to thirty (30) watts of power (“Power over Ethernet”)
per port based on the IEEE 802.3at standard. An optional High Output (HO) version
is also available that can supply up to thirty (30) watts of PoE from ports 1 and 2 and
up to sixty (60) watts of PoE from ports 3 and 4.

Indicating LEDs confirm the operating status of this device. See Figure 8 on Page 5
for an explanation of the indicators.

The ComNet CNGE2FE4SMS[POE][HO] may be either wall mounted, rack mounted
(“ComFit” packaging) or DIN-rail mounted with the use of the ComNet DINBKT4
adapter. See Figure A on Page 6 for mounting instructions.

See Figures 1 – 9 for complete installation details.

INS_CNGE2FE4SMS[POE][HO]_REV- 07/08/11 PAGE 1

INSTALLATION AND OPERATION MANUAL CNGE2FE4SMS[POE][HO]

FIGURE 1 – CNGE2FE4SMS

OPTICAL
FIBER

CAT5/6

CAT5/6

CAT5/6

CAT5/6

BLACK

BLACK WITH WHITE STRIPE

12 to 24 VDC non-PoE

FIGURE 2 – CNGE2FE4SMS

REAR PANELFRONT PANEL

TECH SUPPORT: 1.888.678.9427

INS_CNGE2FE4SMS[POE][HO]_REV- 07/08/11 PAGE 2