Comnet CNGE26FX2TX24MSPOE1 Specsheet

(22) 10/100/1000 BASE-T(X) + (2) Gigabit Combo Ports +

(2) 100/1000 BASE-FX with Power over Ethernet (PoE+)

CNGE26FX2TX24MSPOE1

22 + 2 + 2FLEXIBILIT YINTERNAL ALL GIGABITIEEE 802.3at-20˚ TO 60˚ C

The ComNet CNGE26FX2TX24MSPOE1 is an industrially hardened Managed
Ethernet Switch. It provides IEEE 802.3at PoE to twenty-four 10/100/1000BASE-T(X)
two of which are also gigabit combo ports supporting 100/1000FX SFP Modules. A
further two 100/1000FX SFP* ports are also included. Up to 720 watts of PoE power
is available for distribution across all 24 TX ports. All SFP ports utilize ComNet
SFPs for fiber and connector type and distance. The CNGE26FX2TX24MSPOE1 is
a redundant switch offering multiple Ethernet redundancy protocols to protect your
applications from network interruptions or temporary malfunctions by redirecting
transmission within the network.

FEATURES

› Supports 26 Gigabit Ports:

• 2 100/1000Base-FX SFP Ports

• 2 Gigabit Combo Ports

• 22 10/100/1000BASE-T(X) Ports

› IEEE 802.3at Compliant for PSE. Up to 30 W of PoE+ power

available per port. 720 W total PoE power available.

› Supports Private VLAN

› Supports IPV6 new Internet protocol version

› IGMP v2/v3 (IGMP snooping support) for filtering

multicast traffic

› Supports multiple redundant network rings

› Supports Jumbo frame up to 9.6K Bytes

› HTTPS/SSH protocol to enhance network security

› Supports SNTP client

› Supports application-based QoS management

› Supports Device Binding security function

› Supports ACL and 802.1x User Authentication for security

› Power supply for switch operation and PoE power sourcing is

completely self-contained within the switch

› Fast Redundancy/Recovery – MSTP/RSTP/STP (IEEE802.1s/

w/D) and ERPS (G.8032)

› Windows utility, eConsole, supports centralized management,

and is web-based configurable, or by Telnet and console
(CLI) ports

› Supports IP-based bandwidth management

› SNMP V1/V2c/V3, RMON and 802.1Q VLAN for secure

network management

› Fastest Redundant Ethernet Ring: C-Ring. Recovery time

<30 ms, with up to 250 switches within the ring

› Low-profile 1-RU (1.75-inch) high rack-mountable chassis

mounts within any standard 19-inch equipment rack

› Operating Temperature: -20˚ to +60˚ C

› Multiple warning notifications for unexpected events

› Supports LLDP (Link Layer Discovery Protocol)

› Lifetime Warranty

APPLICATIONS

› HD Surveillance

› High-Port Count Ethernet Hub Locations

* Small Form-Factor Pluggable Module. Sold separately.

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

CNGE26FX2TX24MSPOE1

A

SPECIFICATIONS

(22) 10/100/1000 BASE-T(X) + (2) Gigabit Combo Ports +

(2) 100/1000 BASE-FX with Power over Ethernet (PoE+)

Connectors

10/100/1000Base-TX 22 × RJ-45 Ports with Auto MDI/MDIX and PSE
10/100/1000Base-TX 2 × RJ-45 Ports with Auto MDI/MDIX with PSE

or 2 × 100/1000Base-FX SFP
100/1000Base-FX 2 × SFP¹ Ports
Console Port RS-232 in DB9 connector with console cable

(included) 115200bps, 8, N, 1.

Switch Properties

Switching Latency 7 μs
Switching Bandwidth 52 Gbps
Max. VLANs Available 256
IGMP Multicast Groups 128 for each VLAN
Port Rate Limiting User Defined
MAC Table 8000 MAC addresses available
Priority Queues 4
Processing Store-and-Forward
Jumbo Frame Up to 9.6K Bytes

Features

Security Features Device Binding Security

Enable/Disable Ports, MAC based port security

Port-Based Network Access Control: 802.1x

VLAN (802.1Q): To segregate and secure network traffic

Radius Centralized Password Management

SNMPv3 Encrypted Authentication and Access Security

HTTPS/SSH enhanced network security

IP-Based Bandwidth Management

Application-Based QoS Management
TOS/Diffserv Supported
VLAN VLAN Tagging and GVRP Supported
DHCP Server / Client support
Network Redundancy C-Ring

ERPS (G.8032)

RSTP/STP/MSTP

Power

Operating Voltage Range 100 to 240 VAC, 50-60 Hz (internal power supply).
Power Consumption, Typical 36 watts (without PoE)
Current Protection Overload Current Protected
PoE pin assignment RJ45 port #1 - #24 support IEEE802.3at End-point

Alternative A mode.

Positive (VCC+): RJ45 pin 1, 2

Negative (VCC-): RJ45 pin 3, 6

Electrical & Mechanical

Indicating LEDs Power Ring Master C-Ring (Ring) Fault PoE

PSE RJ-45 Port SFP Port
Enclosure 1-RU high, 19-inch rack-mountable
Size (L×W×H) 13.46 × 16.97 × 1.73 in (34.2 × 43.1 × 4.4 cm)
Shipping Weight <13 lbs./6 kg

Environmental

MTBF >100,000 hours
Operating Temp -20˚ C to +60˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 5% to 95% (non-condensing)²

Regulatory Approvals

EMI FCC Part 15, CISPR (EN55022) Class A
EMS EN61000-4-2 (ESD),

EN61000-4-3 (RS)

EN61000-4-4 (EFT),

EN61000-4-5 (Surge),

EN61000-4-6 (CS),

EN61000-4-8,

EN61000-4-11
Mechanical Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6

Ethernet Standards Supported

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3at for PoE up to 30 watts per port with a total power budget of 720 W
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)

GENCY COMPLIANCE

ORDERING INFORMATION

Part Number Description

CNGE26FX2TX24MSPOE1 (22) 10/100/1000 BA SE-T(X) + (2) Gigabit Combo Por ts + (2) 100/1000 BASE-FX w/ Power over Ethernet (PoE+), 1000 W Power Supply

Included Accessories Rack-mount installation kit, Console c able, and AC Power cable

Options [2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (E xtra charge, consult f actory)

User selection of ComNet SFP (Extra charge, see SFP Modules data sheet for product numbers and compatibility before ordering)

NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is

recommended.
[1] Multimode fiber needs to meet or exceed fiber standard ITU-T G.651. Single mode fiber needs to meet or exceed fiber standard ITU-T G.652
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J.
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.

3 CORPORATE DRIVE

© 2017 Communica tion Networ ks. All Right s Reserve d. “ComNet ” and the “ComNe t Logo” are regis tered tra demarks of Comm unication Net works.

8 TURNBERRY PARK ROAD

|

DANBURY, CONNECTICUT 06810

|

GILDERSOME

|

MORLEY

|

|

USA

T: 203.796.5300

|

LEEDS, UK LS27 7LE

|

F: 203.796.5303

|

T: [phone]

|

TECH SUPPORT: 1.888.678.9427

|

F: [phone]

|

[e-mail]

|

[e-mail]

09 Jan 2017