LETTORE CD/MP3/WMA CON RICEVITORE/
CONTROLLO CeNET
CD/MP3/WMA RADIO/CeNET BEDIENING
RECEPTOR Y REPRODUCTOR DE CD/MP3/WMA/
CONTROL DE CeNET
CD/MP3/WMA-RECEIVER MED CeNET-KONTROLL
RECEPTOR DE CD/MP3/WMA/CONTROLO CeNET
Thank you for purchasing this Clarion product.
∗ Please read this owner’s manual in its entirety before operating this equipment.
∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).
∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.
∗ This manual includes the operating procedures of the iPod interface, CD changer, DAB and TV
tuner connected via the CeNET cable. The iPod interface, CD changer and TV tuner have their
own manuals, but no explanations for operating them are described.
CAUTIONS:
This appliance contains a laser system and
is classified as a “CLASS 1 LASER
PRODUCT”. To use this model properly,
read this Owner’s Manual carefully and keep
this manual for your future reference. In
case of any trouble with this player, please
contact your nearest “AUTHORIZED service
station”. To prevent direct exposure to the
laser beam, do not try to open the enclosure.
!CAUTION
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED IN THE OWNER’S
MANUAL MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
ADVARSEL.
Denne mærking er anbragt udvendigt på
apparatet og indikerer, at apparatet arbejder
med laserstråler af klasse 1, hvilket betyder,
at der anvendes laserstråler af svageste
klasse, og at man ikke på apparatets
yderside kan blive udsat for utilladelig
kraftig stråling.
APPARATET BØR KUN ÅBNES AF
FAGFOLK MED SÆRLIGT KENDSKAB TIL
APPARATER MED LASERSTRÅLER!
Indvendigt i apparatet er anbragt den her
gengivne advarselsmækning, som advarer
imod at foretage sådanne indgreb i
apparatet, at man kan komme til at udsaætte
sig for laserstråling.
OBS!
Apparaten innehåller laserkomponenten
som avger laserstrålning överstigande
gränsen för laserklass 1.
VAROITUS
Suojakoteloa si saa avata. Laite sisältää
laserdiodin, joka lähettää näkymätöntä
silmille vaarallista lasersäteilyä.
vehicle purpose only. Use for tractor, fork
truck, bulldozer, off road vehicle, 2 or 3
wheel motor bicycle, marine boat or other
special purpose vehicle is not appropriate.
2. When the inside of the car is very cold and
the player is used soon after switching on the
heater moisture may form on the disc or the
optical parts of the player and proper
playback may not be possible. If moisture
forms on the disc, wipe it off with a soft cloth.
If moisture forms on the optical parts of the
player, do not use the player for about one
hour. The condensation will disappear
naturally allowing normal operation.
3. Driving on extremely bumpy roads which
cause severe vibration may cause the sound
to skip.
INFORMATION FOR USERS:.
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE
MANUFACTURER WILL VOID THE
WARRANTY.
Sloping Console
This unit uses sloping console to make largescreen displays possible.
When you use the sloping console, be sure to
close it.
CAUTION
BE CAREFUL NOT TO GET YOUR FINGERS
CAUGHT WHEN OPENING AND CLOSING
THE SLOPING CONSOLE.
1. For safety’s sake, always close the
SLOPING CONSOLE before leaving this unit
unused for a prolonged period or switching
OFF the ignition key.
If you switch OFF the ignition key with the
SLOPING CONSOLE tilted, the SLOPING
CONSOLE does not close.
2. Before the SLOPING CONSOLE closes,
there may be a braking sound from the
safety mechanism. This is normal.
DXZ668RMP38DXZ668RMP
Ball-point pen
Roughness
3. If you move the SLOPING CONSOLE by
hand, this may create play. To correct this
play, with the power on for the unit, press the
[Q] button to close the SLOPING
CONSOLE.
4. After a disc is ejected, the SLOPING
CONSOLE automatically returns to the tilted
or closed state. If there is any obstruction
Handling Compact Discs
when the SLOPING CONSOLE tries to
close, the safety mechanism is triggered and
the SLOPING CONSOLE returns to the open
state. If this happens, remove the
obstruction, then press the [Q] button.
5. To avoid scratching the compact disk, keep
the 12 or 8 cm CD level when inserting or
removing them.
English
Use only compact discs bearing the or
mark.
Do not play heart-shaped, octagonal, or other
specially shaped compact discs.
Some CDs recorded in CD-R/CD-RW mode
may not be usable.
Handling
• Compared to ordinary music CDs, CD-R and
CD-RW discs are both easily affected by high
temperature and humidity and some of CD-R
and CD-RW discs may not be played.
Therefore, do not leave them for a long time in
the car.
• New discs may have some roughness around
the edges. If such discs are used, the player
may not work or the sound may skip. Use a
ball-point pen or the like to remove any
roughness from the edge of the disc.
• Never play a compact disc with any
cellophane tape or other glue on it or with
peeling off marks. If you try to play such a
compact disc, you may not be able to get it
back out of the CD player or it may damage
the CD player.
• Do not use compact discs that have large
scratches, are misshapen, cracked, etc. Use
of such discs may cause misoperation or
damage.
•To remove a compact disc from its storage
case, press down on the center of the case
and lift the disc out, holding it carefully by the
edges.
• Do not use commercially available CD
protection sheets or discs equipped with
stabilizers, etc. These may damage the disc
or cause breakdown of the internal
mechanism.
Storage
• Do not expose compact discs to direct
sunlight or any heat source.
• Do not expose compact discs to excess
humidity or dust.
• Do not expose compact discs to direct heat
from heaters.
Cleaning
•To remove fingermarks and dust, use a soft
• Never stick labels on the surface of the
compact disc or mark the surface with a pencil
or pen.
Volgende pagina uitvouwen en doorlezen a.u.b. / Cerciórese de desplegar y de leer la página siguiente.
Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.
Bitte ausbreiten und die nächste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva.
Glöm inte att vika ut och läsa nästa sida. / Não deixe de abrir e ler a próxima página.
cloth and wipe in a straight line from the
center of the compact disc to the
circumference.
• Do not use any solvents, such as
commercially available cleaners, anti-static
spray, or thinner to clean compact discs.
• After using special compact disc cleaner, let
the compact disc dry off well before playing it.
DXZ668RMP4
English
CONTROLS / LES COMMANDES / REGLER / CONTROLLI
2.
REGELAARS / CONTROLES / KONTROLLER / CONTROLOS
Main unit / Appareil principal / Hauptgerät / Apparecchio principale
Français
Hoofdtoestel / Unidad principal / Huvudenhet / Unidade principal
[
RELEASE
[
ADJ
]
[
]
ROTARY
]
[
]
[
PHOTO SENSOR
[ ]
]
Deutsch
[ ,
]
Italiano
Nederlands
Español
Svenska
[
]
A-M
[TA]
[
SRC
]
[
]
SCN
[
]
RPT
[
]
RDM
[
DIRECT
]
[UP], [DN]
[D]
[
IR RECEIVER
[
]
BND
With the SLOPING CONSOLE opened / Ouvrez la CONSOLE RABATTABLE
ÖFFNUNG DER SCHRÄGKONSOLE / Apertura della CONSOLE INCLINATA
Met het KANTELEND BEDIENINGSPANEEL geopend / Apertura de la CONSOLA INCLINABLE
DEN LUTANDE KONSOLEN öppen / Com a CONSOLA INCLINÁVEL aberta
[
CD SLOT
]
[Z]
[C]
[T]
]
Português
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten.
Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.
Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken.
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
Observera: Vik ut denna sida för att kunna se figurerna över bilstereons framsida medan du läser de olika kapitlen.
Nota: Certifique-se de abrir esta página e consulte os diagramas frontais conforme realiza a leitura de cada capítulo.
English
3. NOMENCLATURE
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 (unfold).
Names of the Buttons and Their Functions
[RELEASE] button
• Deeply push in the button to unlock the DCP.
[ADJ] button
• Use the button to switch to the adjustment
mode or RDS adjustment mode (in Radio
FM/DAB mode).
[ROTARY] knob
• Adjust the volume by turning the knob
clockwise or counterclockwise.
• Use the knob to perform various settings.
[] button
• Perform preset scan while in the radio mode.
When the button is pressed and held, auto
store is performed.
• Play or pause a CD while in the CD/MP3/
WMA mode.
• Confirm various settings.
[Q] button
• Press to open the SLOPING CONSOLE and
insert a CD into the CD SLOT.
• Press to eject a CD loaded in the unit.
[PHOTO SENSOR]
•
This sensor detects the brightness inside your
car. When the auto-dimmer function is set to
“AUTO”, the brightness of the display is
dimmed according to the brightness detected
by this sensor.
[Z] button
•
Use the button to select one of the 3 types of
sound characteristics already stored in memory.
[C] button
• Button’s color change to multicolor.
• Press and hold the button for 1 second or
longer to go into the user color adjustment.
[T] button
• Use the button to input a title in the CD
mode.
• Use the button to switch the user titles or
track titles, etc. while in the CD/MP3/WMA
mode.
• Use the button to scroll the title during the
CD-text play, while in the CD/MP3/WMA
mode.
6DXZ668RMP
[D] button
• Switch the display indication (Main display,
Spectrum analyzer display and CT (clock
time) display).
• Press and hold the button for 1 second or
longer (do not over 4 seconds) to enter the
display adjust mode.
• Press and hold the button for 4 seconds or
longer to turn off the display while in the
usual play.
[IR RECEIVER]
• Receiver for remote control unit. (Operating
range: 30˚ in all directions)
[BND] button
• Switch the band, or seek tuning or manual
tuning while in the radio mode.
• Play a first track while in the CD/MP3/WMA
mode.
• Press the button to change the character.
[UP], [DN] buttons
• Select the folder while in the MP3/WMA mode.
[DIRECT] buttons
• Store a station into memory or recall it
directly while in the radio mode.
[RDM] button
• Perform random play while in the CD/MP3/
WMA mode.
• Press and hold the button for 1 second or
longer to perform folder random play while in
the MP3/WMA mode.
[RPT] button
• Repeat play while in the CD/MP3/WMA mode.
• Press and hold the button for 1 second or
longer to perform folder repeat play while in
the MP3/WMA mode.
[SCN] button
• Perform scan play for 10 seconds of each
track while in the CD/MP3/WMA mode.
• Press and hold the button for 1 second or
longer to perform folder scan play while in the
MP3/WMA mode.
Names of the Buttons and Their Functions
English
[SRC] button
• Press the button to turn on the power.
Press and hold the button for 1 second or
longer to turn off the power.
• Switch the operation mode among the radio
mode, etc.
[TA] button
• Use the button to set the TA (Traffic
Announcement) standby mode.
[å, ∂] lever
•
Select a station while in the radio mode or
select a track while in the CD/MP3/WMA mode.
This lever is used to make various settings.
•
Press the lever upward or downward and hold
in position for 1 second or longer to enter the
fast-forward or fast-backward mode.
[CD SLOT]
• CD insertion slot.
[A-M] button
• Use the button to switch to the audio mode
(bass/treble, balance/fader)
• Press and hold for 1 second or longer to turn
on or off the MAGNA BASS EXTEND mode.
Major Button Operations When External Equipment is
Connected to This Unit
●When the CD/DVD changer /
iPod interface is connected
∗ For details, see the section “CD Changer
Operations”. For the DVD changer, refer
to the Owner’s Manual provided with the
DVD changer. For the iPod interface, refer
to the Owner’s Manual provided with the
iPod interface.
∗ Hereinafter, “iPod interface” is abbreviated
as iPod BB.
[] button
• Play or pause a CD, DVD or iPod BB.
[T] button
• Press the button, switches the user titles or
track titles, etc. while in the CD changer
mode.
• Use the button to input a title in the CD
changer mode.
• Use the button to scroll the title during CD-text
play.
[BND] button
• Move the next disc in increasing order.
[UP], [DN] buttons
• Select the disc.
[RDM] button
• Perform random play. Also perform disc
random play when the button is pressed and
held.
[RPT] button
• Perform repeat play. When this button is
pressed and held, disc repeat play is
performed.
[SCN] button
• Perform scan play for 10 seconds of each
track. Disc scan play is performed when the
button is pressed and held.
[å, ∂] lever
• Select a track when listening to a disc.
• Press the lever upward or downward and hold
in position for 1 second or longer to enter the
fast-forward or fast-backward mode.
DXZ668RMP75DXZ668RMP
Ball-point pen
Roughness
Major Button Operations When External Equipment is Connected to This Unit
English
Regarding iPod BB (EA-1251E)
The iPod BB allows connection of an iPod that
can then be operated in the same way as a 6
disc CD changer.
• When an iPod is connected to the iPod BB,
subsequent operations are as performed
from the main unit.
• Not all iPod functions can be controlled from
the main unit.
• iPod models usable with the iPod BB include
models supporting the following software
versions:
… iPod 3rd generation software Ver. 2.2 or
later.
… iPod 4th generation software Ver. 3.0.1 or
later.
… iPod mini software Ver. 1.2 or later.
… iPod photo (images cannot be displayed).
* See your iPod Owner’s manual regarding
what software version is supported by your
iPod.
Notes:
• Scan play cannot be performed with the iPod
BB.
• In order to operate the iPod like a 6-disc CD
changer, a playlist must be constructed
beforehand.
• When connecting the iPod BB and CD changer,
set the address switch on the side of the CD
changer to “2”.
• For other precautions, consult the iPod BB
Owner’s manual.
•“iPod” is a trademark of Apple Computer, Inc.,
registered in the U.S. and other countries.
●When the TV/DAB is connected
∗ For details, see the section “TV
Operations” or “Digital Radio/DAB
Operations”.
[ADJ] button
• Press and hold the button for 1 second or
longer to switch to the TV picture mode or
VTR (external) picture mode.
[] button
• Perform preset scan while in the TV mode.
When the button is pressed and held, auto
store is performed. (This function is only TV
tuner.)
• Perform service scan while in the DAB mode.
[BND] button
• Switch the band.
• When the button is pressed and held, switch
seek tuning or manual mode.
[DIRECT] buttons
• Store a station into memory or recall it directly.
[TA] button
• Use the button to set the TA (Traffic
Announce-ment) standby mode in the DAB
mode. (This function is only DAB tuner.)
Operation status indication
Titles, Spectrum analyzer,
CT (clock time) are displayed.
■ Displayed when changing
source
TUNER : Radio mode
DAB : DAB mode
CD/MP3 : CD/MP3 mode
CD A/C1 : CD changer (iPod BB)
mode
* When connecting iPod
BB.
CD A/C1 : CD changer mode
(2, 3, 4)
DVD A/C : DVD changer mode
TV : TV mode
VTR : VTR mode
AUX : AUX mode
ACCESORY : Accesory mode
TELEPHONE : Telephone mode
DAB :
INFO :
A-VOL :
MB :
Z3 :
ST :
MANU :
AF :
REG :
TA :
TP :
PTY :
DAB indication
Information indication for DAB
AUTO VOL indication
MAGNA BASS EXTEND indication
Z-ENHANCER 1, 2, 3
ST (radio only), MP3, WMA indication
Manual indication
Alternative frequency indication
Regional indication
Traffic announcement indication
Traffic programme indication
Programme type indication
DXZ668RMP9
Display Items
English
Operation status indication
Displays icon corresponding
to playback or selection.
Band / disc No. /
folder No. indication
Preset channel /
track No. indication
Receiving frequency or
channel / play time indication
Items within parentheses ( ) are displayed during
operation as the “Operation status indication”.
• P.SCAN (PRESET SCN) : Preset scan
• AS (AUTO STORE) : Auto store
• S.SCAN (S-SCAN) : Service scan
• SCAN (TRACK SCAN) : Track scan
• RPT (TRACK RPT) : Track repeat
• RDM (TRACK RDM) : Trackrandom
• D.SCAN (DISC SCAN) : Disc
• D.RPT (DISC RPT) : Disc repeat
• D.RDM (DISC RDM) : Discrandom
• SCAN (CHAPTER SCN) : Chapter
• RPT (CHAPTER RPT) : Chapter repeat
• T.RPT (TITLE RPT) : DVD title repeat
• F.SCAN (FOLDER SCN) : Folder
• F.RPT (FOLDER RPT) : Folder repeat
• F.RDM (FOLDER RDM) : Folderrandom
scan
scan
scan
■ Displayed when changing titles
U
USER : Radio / TV user title
: CD user title
PS
PS NAME : RDS PS name
PT
PTY NAME : RDS PTY name
S
S-LABEL : DAB S-LABEL
DISC : CD-TEXT disc title
A
ARTIST : CD-TEXT artist title
TRACK : CD-TEXT track title
FOLDER : MP3 folder name
TRACK : MP3 file name
ALBUM : MP3 album tag
A
ARTIST : MP3 artist tag
T
TITLE : MP3 title tag
■ Example of spectrum analyzer
display (Page 25)
Spectrum analyzer display-1
Spectrum analyzer display-2
10DXZ668RMP
4. DCP
English
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
Removing the DCP
1. With the SLOPING CONSOLE closed, turn
off the power.
2. Press the [RELEASE] button deeply to open
the DCP.
[RELEASE] button
3. Pull the DCP toward you and remove it.
DCP
CAUTION
• Always close the SLOPING CONSOLE
before removing the DCP.
• If you remove the DCP with the SLOPING
CONSOLE open, the SLOPING CONSOLE
closes immediately. Be careful not to get
your fingers caught.
Attaching the DCP
1. Insert the DCP so that the A section on the
right side of the DCP catches on the hook B
on the unit.
2. Press the left side C of the DCP carefully to
fit it in place.
CAUTION
• The DCP can easily be damaged by
shocks. After removing it, be careful not to
drop it or subject it to strong shocks.
• If the [RELEASE] button is pressed and the
DCP is not locked into place, it may fall out
from vibration of the car. This can break
the DCP, so after removing it, either install
it on the unit or put it in its DCP case.
• The connector connecting the unit and the
DCP is an extremely important part. Be
careful not to damage it by pressing on it
with fingernails, screwdrivers, etc.
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
DXZ668RMP11
English
5. REMOTE CONTROL
[
]
SRC
[
], [ ]
[
]
MUTE
[TA]
[
]
PS/AS
Inserting the Battery
1 Turn over the remote control unit and slide the cover
in the direction indicated by the arrow in the
illustration.
2 Insert the battery (CR2025) into the insertion guides,
with the printed side (+) facing upwards.
3 Press the battery in the direction indicated by the
arrow so that it slides into the compartment.
4 Replace the cover and slide in until it clicks into
place.
Notes:
Misuse may result in rupture of the battery, producing
leakage of fluid and resulting in personal injury or
damage to surrounding materials. Always follow these
safety precautions:
• Use only the designated battery .
• When replacing the battery, insert properly, with +/–
polarities oriented correctly.
• Do not subject battery to heat, or dispose of in fire or
water. Do not attempt to disassemble the battery.
• Dispose of used batteries properly.
Signal transmitter
[
BND
[
[
[
DISP
[
PTY
[AF]
]
]
], [
]
]
]
Insertion guide
R
2
C
0
2
5
12DXZ668RMP
Loading...
+ 26 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.