How it Works
Clarion
Loading...
DXZ666MP
User Manual
31 pgs800.65 Kb0
Owners Manual [id]
31 pgs780.15 Kb0
User Manual
31 pgs1.05 Mb0

Clarion DXZ666MP User Manual

DXZ666MP
CD/MP3/WMA RECEIVER/CeNET CONTROL
2. PRECAUTIONS
Ball-point pen
Roughness
English
1. When the inside of the car is very cold and the
player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation.
CAUTION
USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
INFORMATION FOR USERS:.
CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY.
2. Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip.
3. This unit uses a precision mechanism. Even in the event that trouble arises, never open the case, disassemble the unit, or lubricate the rotating parts.
Bottom View of Source Unit
DXZ666MP 38 DXZ666MP
Ball-point pen
Roughness
Motorized Face
This unit uses motorized face to make large-screen displays possible. When you use the motorized face, be sure to close it.
CAUTION
BE CAREFUL NOT TO GET YOUR FINGERS CAUGHT WHEN OPENING AND CLOSING THE MOTORIZED FACE.
1. For safety’s sake, always close the MOTORIZED FACE before leaving this unit unused for a prolonged period or switching OFF the ignition key.
If you switch OFF the ignition key with the MOTORIZED FACE tilted, the MOTORIZED FACE does not close.
2. Before the MOTORIZED FACE closes, there may be a braking sound from the safety mechanism. This is normal.
3. If you move the MOTORIZED FACE by hand, this may create play. To correct this play, with the power on for the unit, press the [Q] button to close the MOTORIZED FACE.
4. After a disc is ejected, the MOTORIZED FACE automatically returns to the tilted or closed state. If there is any obstruction when the MOTORIZED FACE tries to close, the safety mechanism is triggered and the MOTORIZED FACE returns to the open state. If this happens, remove the obstruction, then press the [Q] button.
5. To avoid scratching the compact disk, keep the 12 or 8 cm CD level when inserting or removing them.
Handling Compact Discs
•
Use only compact discs bearing the or
mark.
Do not play heart-shaped, octagonal, or other specially shaped compact discs.
Some CDs recorded in CD-R/CD-RW mode may not be usable.
Handling
•
Compared to ordinary music CDs, CD-R and CD-RW discs are both easily affected by high temperature and humidity and some of CD-R and CD-RW discs may not be played. Therefore, do not leave them for a long time in the car.
• New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc.
•
Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen.
• Never play a compact disc with any cellophane tape or other glue on it or with peeling off marks. If you try to play such a compact disc, you may not be able to get it back out of the CD player or it may damage the CD player.
Do not use compact discs that have large scratches, are misshapen, cracked, etc. Use of such discs may cause misoperation or damage.
•
To remove a compact disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.
• Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These may damage the disc or cause breakdown of the internal mechanism.
Storage
• Do not expose compact discs to direct sunlight or any heat source.
• Do not expose compact discs to excess humidity or dust.
• Do not expose compact discs to direct heat from heaters.
Cleaning
•To remove fingermarks and dust, use a soft cloth and wipe in a straight line from the center of the compact disc to the circumference.
• Do not use any solvents, such as commercially available cleaners, anti-static spray, or thinner to clean compact discs.
• After using special compact disc cleaner, let the compact disc dry off well before playing it.
Be sure to unfold and read the next page.
English
DXZ666MP 4
English
3.CONTROLS/ /
Source unit / /
]
[
]
[
]
DIRECT
]
[
RELEASE
[
,
[
A-M
[
]
[
RPT
ROTARY
] [
RDM
[
]
ADJ
]
]
]
]
[
ISR
[
]
SRC
[
SCN
With the MOTORIZED FACE opened / /
[
CD SLOT
[
]
[
]
C
[
]
Z
[
]
T
]
[
D
[
SENSOR
[
BND
[
], [DN]
UP
]
]
]
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
English
4. NOMENCLATURE
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).
Names of the Buttons and Their Functions
[RELEASE] button
• Deeply push in the button to unlock the DCP.
[ADJ] button
• Press the button to enter the adjust mode.
[ROTARY] knob
• Adjust the volume by turning the knob clockwise or counterclockwise.
• Use the knob to perform various settings.
[ ] button
• Perform preset scan while in the radio mode. When the button is pressed and held, auto store is performed.
• Play or pause a CD while in the CD/MP3/ WMA mode.
• Corfirm various settings.
[Q] button
• Press to open the MOTORIZED FACE and insert a CD into the CD SLOT.
• Press to eject a CD loaded in the unit.
[C] button
• Button’s color change to multicolor.
• Press and hold the button for 1 second or longer to go into the user color adjustment.
[Z] button
•
Use the button to select one of the 3 types of sound characteristics already stored in memory.
[T] button
• Use the button to input a title in the radio, CD mode.
• Use the button to switch the user titles or track titles, while in the CD/MP3/WMA mode.
• Use the button to scroll the title during the CD­text play, while in the CD/MP3/WMA mode.
[D] button
• Switch the display indication (Main display, spectrum analyzer display and Clock display).
• Press and hold the button for 1 second or longer (do not over 4 seconds) to enter the display adjust mode.
• Press and hold the button for 4 seconds or longer to turn off the display while in the usual play, ISR mode, telephone interrupt.
[SENSOR]
• Receiver for remote control unit. (Operating range: 30° in all directions.)
[BND] button
• Switch the band, or seek tuning or manual tuning while in the radio mode.
• Play a first track while in the CD/MP3/WMA mode.
• Press the button to change the character.
[UP], [DN] buttons
• Select the folder while in the MP3/WMA mode.
[DIRECT] buttons
• Store a station into memory or recall it directly while in the radio mode.
[RDM] button
• Perform random play while in the CD/MP3/ WMA mode.
• Press and hold the button for 1 second or longer to perform folder random play while in the MP3/WMA mode.
[RPT] button
• Perform repeat play while in the CD/MP3/ WMA mode.
• Press and hold the button for 1 second or longer to perform folder repeat play while in the MP3/WMA mode.
[SCN] button
• Perform scan play for 10 seconds of each track while in the CD/MP3/WMA mode.
• Press and hold the button for 1 second or longer to perform folder scan play while in the MP3/WMA mode.
[SRC] button
• Press the button to turn on the power. Press and hold the button for 1 second or longer to turn off the power.
• Switch the operation mode among the radio mode, etc.
[ISR] button
• Recall ISR radio station in memory.
•
Press and hold for 2 seconds or longer: Store current station into ISR memory (radio mode only).
[A-M] button
• Use the button to switch to the audio mode (bass, treble, balance, fader).
• Press and hold for 1 second or longer to turn on or off the MAGNA BASS EXTEND mode.
[å, ∂] lever
•
Selects a station while in the radio mode or selects a track while in the CD/MP3/WMA mode. This lever is used to make various settings.
•
Press the lever upward or downward and hold in position for 1 second or longer to enter the fast-forward or fast-backward mode.
[CD SLOT]
• CD insertion slot.
Major Button Operations When External Equipment is Connected to This Unit
English
● When the CD/DVD changer/ iPod interface is connected
∗ For details, see the section “CD Changer
Operations”. For the DVD changer, refer
to the Owner’s Manual provided with the DVD changer. For the iPod interface, refer to the Owner’s Manual provided with the iPod interface.
∗ Hereinafter, “iPod interface” is abbreviated
as iPod BB.
Regarding iPod BB (EA-1251B)
The iPod BB allows connection of an iPod that can then be operated in the same way as a 6 disc CD changer.
• When an iPod is connected to the iPod BB, subsequent operations are as performed from the main unit.
• Not all iPod functions can be controlled from the main unit.
• iPod models usable with the iPod BB include models supporting the following software versions:
… iPod 3rd generation software Ver. 2.2
or later.
… iPod 4th generation software Ver. 3.0.1
or later. … iPod mini software Ver. 1.2 or later. … iPod photo (images cannot be
displayed).
* See your iPod Owner’s manual regarding
what software version is supported by your iPod.
Notes:
• Scan play cannot be performed with the iPod BB.
• In order to operate the iPod like a 6-disc CD changer, a playlist must be constructed beforehand.
• When connecting the iPod BB and CD changer, set the address switch on the side of the CD changer to “2”.
• For other precautions, consult the iPod BB Owner’s manual.
•“iPod” is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
[ ] button
• Play or pause a CD, DVD or iPod BB.
[T] button
• Press the button, switches the user titles or track titles, etc. while in the CD changer mode.
• Use the button to input a title in the CD changer mode.
• Use the button to scroll the title during CD­text play.
[BND] button
• Move the next disc in increasing order.
[UP], [DN] buttons
• Select the disc.
[RDM] button
• Perform random play. Also perform disc random play when the button is pressed and held.
[RPT] button
• Perform repeat play. When this button is pressed and held, disc repeat play is performed.
[SCN] button
• Perform scan play for 10 seconds of each track. Disc scan play is performed when the button is pressed and held.
[å, ∂] lever
• Select a track when listening to a disc.
• Press the lever upward or downward and hold in position for 1 second or longer to enter the fast-forward or fast-backward mode.
DXZ666MP 75 DXZ666MP 6 DXZ666MP
Ball-point pen
Roughness
Major Button Operations When External Equipment is Connected to This Unit
English
● When the TV is connected
∗
For details, see the section “TV Operations”.
[ADJ] button
• Press and hold the button for 1 second or longer to switch to the TV picture mode or VTR (external) picture mode.
[ ] button
• Perform preset scan while in the TV mode. When the button is pressed and held, auto store is performed.
[BND] button
• Switch the band.
• When the button is pressed and held, switch seek tuning or manual mode.
[DIRECT] buttons
• Store a station into memory or recall it directly.
[å, ∂] lever
• Select a station.
Display Items
English
Background indication
• Motion image (1 pattern), wallpaper (5 patterns) (Page 21)
• Demo mode with screen saver (Page 22)
Operation status indication Titles, Spectrum analyzer, clock time are displayed.
■ Displayed when changing
source
TUNER : radio mode
CD/MP3 : CD/MP3 mode CD A/C1 : CD changer (iPod BB)
mode * When connecting iPod BB.
CD A/C1 : CD changer mode (2, 3, 4)
DVD A/C : DVD changer mode TV : TV mode VTR : VTR mode AUX : AUX mode ACCESORY : accesory mode TELEPHONE : telephone mode
MB : Z3 : ST : MANU :
MAGNA BASS EXTEND indication Z-ENHANCER 1,2,3 ST (radio only), MP3, WMA indication Manual indication
DXZ666MP 9
Display Items
English
Operation status indication
Displays icon corresponding to playback or selection.
Band / disc No. / folder No. indication
Preset channel / track No. indication
Receiving frequency or channel / play time indication
Items within parentheses ( ) are displayed during operation as the “Operation status indication”.
• P.SCAN (PRESET SCN) : Preset scan
• AS (AUTO STORE) : Auto store
• SCAN (TRACK SCAN) : Track scan
• RPT (TRACK RPT) : Track repeat
• RDM (TRACK RDM) : Track random
• D.SCAN (DISC SCAN) : Disc
• D.RPT (DISC RPT) : Disc repeat
• D.RDM (DISC RDM) : Disc random
• SCAN (CHAPTER SCN) : Chapter
• RPT (CHAPTER RPT) : Chapter repeat
• T.RPT (TITLE RPT) : DVD title repeat
• F.SCAN (FOLDER SCN) : Folder
• F.RPT (FOLDER RPT) : Folder repeat
• F.RDM (FOLDER RDM) : Folder random
scan
scan
scan
■ Displayed when changing titles
U
USER : Radio / TV user title
: CD user title
DISC : CD-TEXT disc title
A
ARTIST : CD-TEXT artist title TRACK : CD-TEXT track title FOLDER : MP3 folder name TRACK : MP3 file name ALBUM : MP3 album tag
A
ARTIST : MP3 artist tag
T
TITLE : MP3 title tag
■ Example of spectrum analyzer
display (Page 22)
Spectrum analyzer display-1
Spectrum analyzer display-2
10 DXZ666MP
Loading...
+ 21 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use