Clarion APXLINK User Manual

H

EATSINKLINKFOR

APX A

MPLIFIERS

M

ODEL

:

APXLINK

I

NTRODUCTION

:

Congratulations on your purchase of a Clarion Heatsink Link for APX amplifiers. The APXLINK allows you to attach any two APX
amplifier together for a sophisticated amplifier look. The APXLINK also covers amplifier connections and RCAcable connectors for a clean
amplifier style with little or no effort. The APXLINK is designed to install easily and quickly. Read the following installation procedure
carefully for best results.

S

PACERINSTALLATION

:

1. Using the spacer and mounting brackets as a guide, attach your amplifiers to the mounting surface.

Clarion Corporation of America, 661 West Redondo Beach Blvd.
Gardena, CA 90247-4201 Phone: [phone] FAX: [phone]
Clarion Canada, Inc., 2239 Winston Park Drive, Oakville,
Ontario L6H 5R1, Canada Phone: [phone] FAX: [phone]

2. Remove the mounting screws from the amp mounting holes that are between the two amplifiers. Place the spacer brackets over the
mounting holes with the uprights to the outside, and replace the amplifier mounting screws.

3. Carefully set the spacer down between the two amplifiers, and secure it with two screws into the mounting brackets.

NOTE: Leave the amp mounting screws snug (not tight) until the spacer is secure. This will allow you to slide the ampli-

fiers slightly to get the closest possible joints.

2000-APXLINK Rev. 0 (5/00)

Clarion Corporation of America

661 West Redondo Beach Blvd

Gardena, CA 90247

800-Go-Clarion

www.clarion-usa.com

©2000 Clarion Corporation, Gardena, CA

OWNER’S MANUAL/INSTALLATION GUIDE