Citroën C Elyse E 2015 Owner's Manual

Handbook
On-line handbook
Referring to the handbook on-line also gives you access to the latest information available, easily identied by the bookmark, associated with this symbol:
Select one of the following means of access to view your handbook on-line...
Find your handbook on the CITRoËn website, under "MyCITROËN".
This personal and customisable space allows you to establish direct and special contact with
CITRoËn.
If the "MyCITRoËn" function is not available on the CITRoËn public website for your country, you
can nd your handbook at the following address: http://service.citroen.com/ddb/
Select:
the language, the vehicle, its body style, the print edition of your handbook appropriate for the date of registration of your vehicle.
Scan this code for direct access to your handbook.
We draw your attention to the following...
Reading the detailed sections is essential to make the most of your vehicle, in complete safety. Your vehicle is fitted with only some of the equipment described in this document, depending on the trim level, version and the specifications for the country in which it is sold.
The fitting of electrical equipment or accessories which are not recommended by CITROËN may result in a failure of your vehicle's electronic system. Contact a CITROËN dealer for information on the recommended equipment and accessories.
key
safety warning
additional information
CITRoËn has a presence on every continent,
a complete product range, bringing together technology and a permanent spirit of innovation, for a modern and creative approach to mobility. We thank you and congratulate you on your choice.
at the wheel of your new vehicle,
getting to know each system, each control, each setting, makes your trips, your journeys more comfortable and more enjoyable.
contributes to the protection of the environment
refer to the page indicated
Happy motoring!

Contents

overview
Eco-driving
.
.
Monitoring
Instrument panel 10 Indicator and warning lamps 11 Service indicator 20 Distance recorders 22 Setting the date and time 23 Trip computer 24 Monochrome screen C
(Audio system / Bluetooth) 26
access
Remote control key 30 Alarm 34 Doors 36 Boot 37 Windows 39
Comfort
Front seats 40 Rear seats 42 Mirrors 43 Steering wheel adjustment 45 Ventilation 46 Heating 48 Manual air conditioning
(without display screen) 48
Electronic air conditioning
(with display screen) 50 Front demist - defrost 53 Rear screen demist - defrost 54
Fittings
Interior ttings 55 Boot ttings 58
Driving
Driving recommendations 60 Starting-switching off the engine 61 Parking brake 64 Manual gearbox 65 Electronic gearbox 66 Automatic gearbox 70 Gear shift indicator 74 Speed limiter 75 Cruise control 77 Rear parking sensors 79
Visibility
Lighting control 81 Headlamp adjustment 86 Wiper control stalk 87 Courtesy lamps 89
Contents
Safety
Direction indicators 90 Hazard warning lamps 90 Horn 90 Under-ination detection 91 Braking assistance systems 94 Trajectory control systems 95 Front seat belts 96 Airbags 99
Child safety
Child seats 103 Deactivating the passenger's front airbag 106 ISOFIX mountings 112 Child lock 117
Practical information
Fuel tank 118 Misfuel prevention (Diesel) 119 Running out of fuel (Diesel) 121 Temporary puncture
repair kit 122 Changing a wheel 128 Snow chains 135 Changing a bulb 136 Changing a fuse 142 Battery 147 Electrical energy economy mode 150 Changing a wiper blade 151 Towing the vehicle 152 Towing a trailer 154 Very cold climate screen(s) 156 Advice on care and maintenance 157 Accessories 157 Mats 159 Roof bars 160
Checks
Bonnet 162 Petrol engines 163 Diesel engine 164 Checking levels 165 Checks 169
Technical data
Petrol engines 171 Petrol weights 172 Diesel engine 173 Diesel weights 174 Dimensions 175 Identication markings 176
Audio and telematics
Audio system / Bluetooth 177 Audio system 209
Visual search
.
Alphabetical index
.

Overview

Exterior
Under-ination detection
This system automatically checks the pressures of the tyres when driving and alerts you in the event of under-inflation.
91
Temporary puncture repair kit
This kit is a complete system consisting of a compressor and a sealant cartridge, to allow the temporary repair of a tyre.
122
4
Rear parking sensors
This system provides a warning when manoeuvring backwards by detecting obstacles located behind the vehicle.
79
Interior
Speed limiter / Cruise control
These two systems allow you to control the speed of your vehicle according to a value you have set.
75 / 77
Electronic air conditioning (with display screen)
This system, equipped with a display screen, provides you with optimum control of temperature and air circulation in the passenger compartment.
Overview
Audio and communication systems
These systems benefit from the latest technology: MP3 compatible audio systems, USB player, Bluetooth hands-free system, auxiliary inputs, ...
Audio system / Bluetooth
177
Audio system
209
.
50
5
Overview
Instruments and controls
1. Cruise control / speed limiter controls.
2. Steering wheel adjustment control.
3. Lighting and direction indicator stalk.
4. Instrument panel.
5. Driver's airbag and horn.
6. Cigarette lighter / 12 V accessory socket.
USB port / auxiliary socket.
7. Heated seat control.
8. Fuel filler flap release.
Boot lid release lever*.
9. Bonnet release.
10. Fusebox.
11. Headlamp height adjustment.
12. Dynamic Stability Control (ESP/ASR)
button
Boot lid release button*. Alarm warning lamp.
13. Door mirror adjustment control.
14. Side adjustable and air vent.
15. Front door glass demisting/defrosting vent.
* Depending on version.
6
Instruments and controls
1. Steering lock and ignition switch.
2. Wiper and screenwash / trip computer
control stalk.
3. Central locking button.
4. Open storage.
or
Monochrome screen C
(Audio system / Bluetooth).
5. Adjustable centre air vents.
6. Windscreen demisting/defrosting vent.
7. Passenger's airbag.
8. Glove box.
Passenger's airbag deactivation switch.
9. Hazard warning lamps button.
10. Audio system.
11. Heating / Air conditioning controls.
12. Ashtray / Cup holder.
13. Electric window switches.
14. Gear lever.
15. Parking brake.
Overview
.
7

Eco-driving

Eco-driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.
Optimise the use of your gearbox
Control the use of your electrical equipment
With a manual gearbox, move off gently, change up without waiting and drive by changing up quite soon.
With an automatic or electronic gearbox, stay in Drive "D" or auto "A", according to the type of gearbox, without pressing the accelerator pedal heavily or suddenly.
The gear shift indicator invites you to select the most suitable gear: once the indication is displayed in the instrument panel, follow the advice straight away. For vehicles fitted with an electronic or automatic gearbox, this indicator only appears in manual mode.
Before moving off, if the passenger compartment is too warm, ventilate it by opening the windows and air vents before using the air conditioning. Above 30 mph (50 km/h), close the windows and leave the air vents open. Remember to make use of equipment that can help keep the temperature in the passenger compartment down (window blinds...). Switch off the air conditioning as soon as the desired temperature is attained. Switch off the demisting and defrosting controls, if not automatic. Switch off the heated seat as soon as possible.
Switch off the headlamps and foglamp when the level of light does not require their use.
Drive smoothly
Maintain a safe distance between vehicles, use engine braking rather than the brake pedal, and press the accelerator progressively. These practices contribute towards a reduction in fuel consumption and CO emissions and also helps reduce the background traffic noise.
If your vehicle has cruise control, make use of the system at speeds above 25 mph (40 km/h) when the traffic is flowing well.
8
Avoid running the engine before moving off, particularly in winter; your vehicle will warm up much faster while driving.
2
As a passenger, if you avoid connecting your multimedia devices (film, music, video game...), you will contribute towards limiting the consumption of electrical energy, and so of fuel. Disconnect your portable devices before leaving the vehicle.
Eco-driving
.
Limit the causes of excess consumption
Spread loads throughout the vehicle; place the heaviest items in the bottom of the boot, as close as possible to the rear seats. Limit the loads carried in the vehicle and reduce wind resistance (roof bars, roof rack, bicycle carrier, trailer...). Use a roof box in preference. Remove roof bars and roof racks after use.
At the end of winter, remove snow tyres and refit your summer tyres.
Observe the recommendations on maintenance
Check the tyre pressures regularly, when cold, referring to the label in the door aperture, driver's side. Carry out this check in particular:
- before a long journey,
- at each change of season,
- after a long period out of use. Don't forget the spare wheel and the tyres on any trailer or caravan.
Have your vehicle serviced regularly (engine oil, oil filter, air filter...) and observe the schedule of operations recommended by the manufacturer.
When refuelling, do not continue after the 3 avoid any overflow.
At the wheel of your new vehicle, it is only after the first 1 800 miles (3 000 kilometres) that you will see the fuel consumption settle down to a consistent average.
rd
cut-off of the nozzle to
9

Monitoring

Instrument panel for petrol - Diesel
10
Dials
1. Rev counter (x 1 000 rpm).
2. Screen.
3. Speedometer (mph or km/h).
4. Reminder of service information
Reset the selected function to zero (trip
distance recorder or service indicator)
Adjust the time.
Screen
A. Electronic or automatic gearbox
information.
Gear shift indicator.
B. Time. C. Range (miles or km)
or
Trip distance recorder.
D. Fuel gauge. E. Service indicator (miles or km)
then,
total distance recorder. These two functions are displayed
successively when switching on the ignition.
F. Speed limiter or cruise control settings.
Monitoring

Indicator and warning lamps

Visual indicators informing the driver that a system is in operation (operation or deactivation indicator lamps) or of the occurrence of a fault (warning lamp).
When the ignition is switched on
Certain warning lamps come on for a few seconds when the vehicle's ignition is switched on. When the engine is started, these same warning lamps should go off. If they remain on, before moving off, refer to the information on the warning lamp concerned.
Associated warnings
The illumination of certain warning lamps may be accompanied by an audible signal and a message in the multifunction screen. The warning lamps may come on continuously (fixed) or flash.
Certain warning lamps may come on in one of two different modes. Only by relating the type of illumination to the operating status of the vehicle can it be ascertained whether the situation is normal or whether a fault has occurred.
1
11
Monitoring
Operation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding system has come into operation.
Warning / indicator lamp State Cause Action / Observations
Left-hand direction indicator
Right-hand direction indicator
Dipped beam headlamps
flashing with buzzer. The lighting stalk is pushed down.
flashing with buzzer. The lighting stalk is pushed up.
fixed. The lighting stalk is in the "Dipped
beam headlamps" position.
12
Main beam headlamps
Front foglamps fixed. The front foglamps are switched on
Rear foglamp fixed. The rear foglamp is switched on
For more information on the lighting controls, refer to the "Visibility" section.
fixed. The lighting stalk is pulled towards
you.
using the ring on the lighting control stalk.
using the ring on the lighting control stalk.
Pull the stalk to return to dipped beam headlamps.
Turn the ring on the lighting control stalk rearward twice to switch off the front foglamps.
Turn the ring on the lighting control stalk to the rear to switch off the rear foglamp.
Monitoring
Warning / indicator lamp State Cause Action / Observations
Diesel engine
pre-heating
Parking brake
Foot on the
brake pedal
fixed. The key is at position 2 (ignition on) in
the ignition switch.
fixed. The parking brake is applied or not
properly released.
fixed. The brake pedal must be pressed. With an electronic gearbox, press the brake pedal to
flashing. With an electronic gearbox, if you
hold the vehicle on an incline using the accelerator for too long, the clutch overheats.
Wait until the warning lamp goes off before starting. The period of illumination of the warning lamp is determined by the climatic conditions (up to about thirty seconds in extreme climatic conditions). If the engine does not start, switch the ignition off and then on, wait until the warning lamp goes off again, then start the engine.
Release the parking brake to switch off the warning lamp, keeping your foot on the brake pedal. Observe the safety recommendations. For further information on the parking brake, refer to the "Driving" section.
start the engine (lever in position N). With an automatic gearbox, with the engine running, press the brake pedal before releasing the parking brake, to unlock the lever and come out of position P. If you wish to release the parking brake without pressing the brake pedal, this warning lamp will remain on.
Use the brake pedal and/or the parking brake.
1
13
Monitoring
Deactivation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally. This is may be accompanied by an audible signal and a message in the screen.
Warning / indicator lamp State Cause Action / Observations
Passenger's
airbag system
fixed. The control, located in the glove box,
is set to the OFF position. The passenger's front airbag is deactivated. You can install a rearward facing child seat, unless there is a fault with the operation of the airbags (Airbag warning lamp on).
Set the control to the ON position to activate the
passenger's front airbag. In this case, do not fit a child seat in the rearward facing position.
14
ESP/ASR fixed. The button, located at the bottom
left of the dashboard, is pressed. Its indicator lamp is on. The ESP/ASR is deactivated. ESP: electronic stability programme. ASR: anti-slip regulation.
Press the button to activate the ESP/ASR. Its indicator lamp goes off. The ESP/ASR system is activated automatically when the vehicle is started. If deactivated, the system is reactivated automatically from around 30 mph (50 km/h).
Monitoring
Warning lamps
When the engine is running or the vehicle is being driven, illumination of one of the following warning lamps indicates a fault which requires action on the part of the driver. Any fault resulting in the illumination of a warning lamp must be investigated further by reading the associated message in the screen. If you encounter any problems, contact a CITROËN dealer or a qualified workshop.
Warning / indicator lamp State Cause Action / Observations
STOP fixed, associated with
another warning lamp.
Service on temporarily. Minor faults have occurred for which
fixed. Major faults have occurred for which
It is associated with the engine oil pressure or the engine coolant temperature.
there is no specific warning lamp.
there is no specific warning lamp.
Stop as soon as it is safe to do so. Park, switch off the ignition and call a CITROËN dealer or qualified workshop.
Identify the fault by reading the message shown in the screen, such as, for example:
- saturation of the particle emissions filter (Diesel).
- the power steering,
- a minor electrical fault.
- ... For any other faults, contact a CITROËN dealer or a qualified workshop.
Identify the fault by reading the message shown in the screen and then contact a CITROËN dealer or qualified workshop.
1
15
Monitoring
Warning / indicator lamp State Cause Action / Observations
Braking fixed. The brake fluid level has dropped
+ fixed, associated
Maximum coolant temperature
Under-inflation fixed, accompanied by
+ flashing then fixed,
with the ABS warning lamp.
fixed red. The temperature of the cooling
an audible signal and a message.
accompanied by the Service warning lamp.
significantly.
The electronic brake force distribution (EBFD) system has a fault.
system is too high.
The pressure in one or more wheels is too low.
The system has fault: the tyre pressures are no longer monitored.
You must stop as soon as it is safe to do so. Top up with brake fluid listed by CITROËN. If the problem persists, have the system checked by a CITROËN dealer or a qualified workshop.
You must stop as soon as it is safe to do so. Have it checked by a CITROËN dealer or a qualified workshop.
Stop as soon as it is safe to do so. Wait until the engine has cooled down before topping up the level, if necessary. If the problem persists, contact a CITROËN dealer or qualified workshop.
Check the pressure of the tyres as soon as possible. This check should preferably be carried out when the tyres are cold. You must reinitialise the system after the adjustment of one or more tyre pressures and after changing one or more wheels. For more information, refer to the "Under-inflation detection" section.
Check the tyre pressures as soon as possible. Have the system checked by a CITROËN dealer or a qualified workshop.
16
Monitoring
Warning / indicator lamp State Cause Action / Observations
Anti-lock Braking System (ABS)
Dynamic stability control (ESP/ASR)
Engine
autodiagnosis system
Engine fault fixed, orange. The engine has a minor fault. Contact a CITROËN dealer or a qualified workshop as
fixed. The anti-lock braking system has a
fault.
flashing. The ESP/ASR regulation is active. The system optimises traction and improves the
fixed. Unless it has been deactivated
(button pressed and its indicator lamp on) the ESP/ASR system has a fault.
fixed. The emission control system has a
fault.
flashing. The engine management system has
a fault.
fixed, red. The engine has a major fault causing
a breakdown.
The vehicle retains conventional braking. Drive carefully at reduced speed and contact a CITROËN dealer or a qualified workshop without delay.
directional stability of the vehicle.
Have it checked by a CITROËN dealer or a qualified workshop.
The warning lamp should go off when the engine is started. If it does not go off, contact a CITROËN dealer or qualified workshop without delay.
Risk of destruction of the catalytic converter. Have it checked by a CITROËN dealer or a qualified workshop.
soon as possible.
You must stop as soon as it is safe to do so. Park, switch off the ignition and contact a CITROËN dealer or qualified workshop.
1
17
Monitoring
Warning / indicator lamp State Cause Action / Observations
Low fuel level fixed. When it first comes on there remains
approximately 5 litres of fuel in the
tank.
You must refuel as soon as possible to avoid running out of fuel. This warning lamp will come on every time the ignition is switched on, until a sufficient addition of fuel is made. Fuel tank capacity: approximately 50 litres. Never continue to drive until you run out of fuel as this could damage the emission control and injection systems.
18
Engine oil pressure
Battery charge fixed. The battery charging circuit has a
Door(s) open / Electric opening boot lid open
fixed. There is a fault with the engine
fixed if the speed is below 6 mph (10 km/h).
fixed and accompanied by an audible signal if the speed is above 6 mph (10 km/h).
lubrication system.
fault (dirty or loose terminals, slack or cut alternator belt, ...).
A door or the electric opening boot is still open.
You must stop as soon it is safe to do so. Park, switch off the ignition and contact a CITROËN dealer or a qualified workshop.
The warning lamp should go off when the engine is started. If it does not go off, contact a CITROËN dealer or a qualified workshop.
Close the door or boot.
Monitoring
Warning / indicator lamp State Cause Action / Observations
Driver's seat belt not fastened or unfastened / Front passenger's seat belt unfastened
Airbags on temporarily. This lamp comes on for a few
Power steering fixed. The power steering has a fault. Drive carefully at reduced speed.
fixed or flashing accompanied by an increasing audible signal.
fixed. One of the airbag or seat belt
The driver has not fastened or has unfastened their seat belt. The front passenger has unfastened their seat belt.
seconds when you turn on the ignition, then goes off.
pretensioner systems has a fault.
Pull the strap then insert the tongue in the buckle.
This lamp should go off when the engine is started. If it does not go off, contact a CITROËN dealer or a qualified workshop.
Have it checked by a CITROËN dealer or a qualified workshop.
Have it checked by a CITROËN dealer or a qualified workshop.
1
19
Monitoring

Service indicator

System which informs the driver when the next service is due, in accordance with the manufacturer's servicing schedule. The point at which the service is due is calculated from the last indicator zero reset. It is determined by two parameters:
- the distance travelled,
- the time elapsed since the last service.
More than 1800 miles (3000 km) remain before the next service is due
When the ignition is switched on, no service information appears in the screen.
Between 600 miles (1 000 km) and 1800 miles (3 000 km) remain before the next service is due
For a few seconds after the ignition is switched on, the spanner symbolising the service operations comes on. The distance recorder display line indicates the distance remaining before the next service is due. Example: 1 700 miles (2 800 km) remain before the next service is due. For a few seconds after the ignition is switched on, the screen indicates:
A few seconds after the ignition is switched on, the spanner goes off; the distance recorder resumes its normal operation. The screen then indicates the total and trip distances.
Less than 600 miles (1 000 km) remain before the next service is due
Example: 560 miles (900 km) remain before
the next service is due. For a few seconds after the ignition is switched on, the display indicates:
A few seconds after the ignition is switched on, the distance recorder resumes its normal operation. The spanner remains on to indicate that a service must be carried out soon.
20
Service overdue
For a few seconds after the ignition is switched on,the spanner flashes to indicate that the service must be carried out as soon as possible. Example: the service is overdue by 180 miles (300 km). For a few seconds after the ignition is switched on, the display indicates:
Service indicator zero reset
Monitoring
1
Retrieving the service information
You can access the service information at any time. F Press the trip distance recorder zero reset
button.
The service information is displayed for a
few seconds, then disappears.
A few seconds after the ignition is switched on, the distance recorder resumes its normal operation. The spanner remains on.
The distance remaining may be weighted by the time factor, depending on the driver's driving habits. Therefore, the spanner may also come on if you have exceeded the period since the last service, indicated in the manufacturer's service schedule.
After each service, the service indicator must be reset to zero. The procedure for resetting to zero is as follows:
F switch off the ignition, F press and hold the trip distance recorder
zero reset button,
F switch on the ignition; the distance recorder
display begins a countdown,
F when the display indicates "=0", release
the button; the spanner disappears.
Following this operation, if you wish to disconnect the battery, lock the vehicle and wait at least five minutes for the zero reset to be taken into account.
21
Monitoring

Distance recorders

Total distance recorder
System which measures the total distance travelled by the vehicle during its life. The total and trip distances are displayed for thirty seconds when the ignition is switched off, when the driver's door is opened and when the vehicle is locked or unlocked.
Trip distance recorder
System which measures a distance travelled during a day or other period since it was reset to zero by the driver. F With the ignition on, press the button until
zeros appear.
22
Monitoring

Setting the date and time

Instrument panel Audio system / Bluetooth
Use the left-hand button on the instrument
panel to carry out the operations in the
following order: F press the button for more than
two seconds: the minutes flash,
F press the button to increase the minutes, F press the button for more than
two seconds: the hours flash,
F press the button to increase the hours, F press the button for more than
two seconds: 24H or 12H is displayed,
F press the button to select 24H or 12H, F press the button for more than two seconds
to complete the adjustments. After approximately 30 seconds without any action, the screen returns to the normal display.
Use the audio system buttons to carry out the operations in the following order:
F press the "MENU" button,
F using the arrows, select the
"Personalisation - Configuration" menu then confirm by pressing the control knob,
1
F using the arrows, select the "Screen
configuration" menu then confirm,
F using the arrows, select the "Set date and
time" menu then confirm,
F select the setting then confirm, F modify the setting then confirm again to
register the modification,
F adjust the settings one by one, confirming
each time,
F select the "OK" tab in the screen then
confirm to exit the "Set date and time" menu.
23
Monitoring

Trip computer

System that gives you information on the current journey (range, fuel consumption…).
Screen in instrument panel
24
Monochrome screen C
Information displays
F Press the button, located at the end of the
wiper stalk, to display the various items of trip computer information in succession.
The trip computer provides the following
information:
- range,
- current fuel consumption,
- distance travelled,
- average fuel consumption,
- average speed.
F The next press then returns you to the
normal display.
Zero reset
F Press the control for more than
two seconds to reset to zero the distance travelled, the average fuel consumption and the average speed.
Trip computer, a few definitions
Range
(km) The number of kilometres which can be covered with the fuel remaining in the tank. Related to the average fuel consumption over the last few kilometres travelled.
This value may vary following a change in the style of driving or the relief, resulting in a significant change in the current fuel consumption.
When the range falls below 30 km, dashes are displayed. After filling with at least 5 litres of fuel, the range is recalculated and is displayed when it exceeds 100 km.
Current fuel consumption
(l/100 km or km/l) Calculated during the last few seconds.
This function is only displayed from 30 km/h.
Average fuel consumption
(l/100 km or km/l) Calculated since the last trip reset.
Monitoring
1
Distance travelled
(km) Calculated since the last trip reset.
If dashes are displayed continuously while driving in place of the digits, contact a CITROËN dealer or a qualified workshop.
Average speed
(km/h) Calculated since the last trip reset.
25
Monitoring

Monochrome screen C (Audio system / Bluetooth)

Displays in the screen Controls
This displays the following information:
- time,
- date,
- ambient temperature (this flashes if there is a risk of ice),
- status of doors and boot,
- parking sensors,
- audio sources (radio, CD, USB port, jack socket...),
- trip computer (refer to the "Instruments and controls" section).
Warning or information messages may appear temporarily. These can be cleared by pressing the "BACK" button.
From your Audio system / Bluetooth control panel, you can press:
F the "MENU" button to gain access to the
main menu,
F the "MODE" button to select the display
of information in "Full screen" or "New window" mode,
F the "7" or "8" buttons to navigate in a list, F press the central button to confirm,
or
F the "BACK" button to abandon the
operation in progress or go back up one level in the menu.
Main menu
F Press the "MENU" button to gain access
to the main menu:
- "Multimedia",
- "Telephone",
- "Trip computer",
- "Bluetooth connection",
- "Personalisation-configuration",
F Press the "7" or "8" buttons to select the
menu required, then confirm by pressing the centre button.
26
Monitoring
1
"Multimedia" menu
With the Audio system / Bluetooth switched on, once this menu has been selected you can activate or deactivate the functions linked with use of the radio, CD or the MP3 player (USB port / jack socket). For more information on the "Multimedia" application, refer to the Audio system / Bluetooth part of the "Audio and Telematics" section.
"Telephone" menu
With the Audio system / Bluetooth switched on, once this menu has been selected you can make a call and refer to the different telephone contacts lists. For more information on the "Telephone" application, refer to the Audio system / Bluetooth part of the "Audio and Telematics" section.
"Trip computer" menu
Once this menu has been selected, you can consult information concerning the status of the vehicle.
Alert log
This summarises the status and alert messages of the functions, displaying them in succession in the multifunction screen.
F Press the "MENU" button to gain access
to the general menu.
F Press the double arrows, then the centre
button to select the "Trip computer"
menu.
F In the "Trip computer" menu, select the
"Alert log" line and confirm.
27
Monitoring
"Bluetooth connection" menu
With the Audio system / Bluetooth switched on, once this menu has been selected you can connect or disconnect a Bluetooth device (telephone, media player) and define the connection mode (hands-free kit, playing audio files). For more information on the "Bluetooth connection" application, refer to the Audio system / Bluetooth part of the "Audio and Telematics" section.
"Personalisation­Configuration" menu
Once this menu has been selected, you can gain access to the following functions:
- "Define the vehicle parameters",
- "Choice of language",
- "Display configuration".
Dene the vehicle parameters
Once this menu has been selected, you can activate or deactivate the following equipment, classified by category:
- "Driving assistance",
- "Driving lighting",
- "Comfort lighting".
28
Loading...
+ 255 hidden pages