Referring to the handbook on-line also gives you
access to the latest information available, easily
identied by the bookmark, associated with this
symbol:
Select one of the following means of access to
view your handbook on-line...
Find your handbook on the CITRoËn website, under "MyCITROËN".
This personal and customisable space allows you to establish direct and special contact with
CITRoËn.
If the "MyCITRoËn" function is not available on the CITRoËn public website for your country, you
can nd your handbook at the following address:
http://service.citroen.com/ddb/
Select:
the language,
the vehicle, its body style,
the print edition of your handbook appropriate for the date of registration of your vehicle.
Scan this code for direct access to your handbook.
We draw your attention to the following...
Reading the detailed sections is essential to
make the most of your vehicle, in complete
safety.
Your vehicle is fitted with only some of the
equipment described in this document,
depending on the trim level, version and the
specifications for the country in which it is sold.
The fitting of electrical equipment or
accessories which are not recommended
by CITROËN may result in a failure of
your vehicle's electronic system. Contact
a CITROËN dealer for information on the
recommended equipment and accessories.
key
safety warning
additional information
CITRoËn has a presence on every continent,
a complete product range,
bringing together technology and a permanent spirit of innovation,
for a modern and creative approach to mobility.
We thank you and congratulate you on your choice.
at the wheel of your new vehicle,
getting to know each system,
each control, each setting,
makes your trips, your journeys
more comfortable and more enjoyable.
contributes to the protection of the environment
refer to the page indicated
Happy motoring!
Contents
overview
Eco-driving
.
.
Monitoring
Instrument panel 10
Indicator and warning lamps 11
Service indicator 20
Distance recorders 22
Setting the date and time 23
Trip computer 24
Monochrome screen C
(Audio system / Bluetooth) 26
access
Remote control key 30
Alarm 34
Doors 36
Boot 37
Windows 39
Comfort
Front seats 40
Rear seats 42
Mirrors 43
Steering wheel adjustment 45
Ventilation 46
Heating 48
Manual air conditioning
Petrol engines 171
Petrol weights 172
Diesel engine 173
Diesel weights 174
Dimensions 175
Identication markings 176
Audio and telematics
Audio system / Bluetooth 177
Audio system 209
Visual search
.
Alphabetical index
.
Overview
Exterior
Under-ination detection
This system automatically checks the pressures of
the tyres when driving and alerts you in the event of
under-inflation.
91
Temporary puncture repair kit
This kit is a complete system consisting of a compressor and
a sealant cartridge, to allow the temporary repair of a tyre.
122
4
Rear parking sensors
This system provides a warning when manoeuvring
backwards by detecting obstacles located behind
the vehicle.
79
Interior
Speed limiter / Cruise control
These two systems allow you to control the
speed of your vehicle according to a value you
have set.
75 / 77
Electronic air conditioning (with display screen)
This system, equipped with a display screen, provides you with optimum
control of temperature and air circulation in the passenger compartment.
Overview
Audio and communication
systems
These systems benefit from the latest
technology: MP3 compatible audio systems,
USB player, Bluetooth hands-free system,
auxiliary inputs, ...
Audio system / Bluetooth
177
Audio system
209
.
50
5
Overview
Instruments and controls
1. Cruise control / speed limiter controls.
2. Steering wheel adjustment control.
3. Lighting and direction indicator stalk.
4. Instrument panel.
5. Driver's airbag and horn.
6. Cigarette lighter / 12 V accessory socket.
USB port / auxiliary socket.
7. Heated seat control.
8. Fuel filler flap release.
Boot lid release lever*.
9. Bonnet release.
10. Fusebox.
11. Headlamp height adjustment.
12. Dynamic Stability Control (ESP/ASR)
button
Boot lid release button*.
Alarm warning lamp.
13. Door mirror adjustment control.
14. Side adjustable and air vent.
15. Front door glass demisting/defrosting vent.
* Depending on version.
6
Instruments and controls
1. Steering lock and ignition switch.
2. Wiper and screenwash / trip computer
control stalk.
3. Central locking button.
4. Open storage.
or
Monochrome screen C
(Audio system / Bluetooth).
5. Adjustable centre air vents.
6. Windscreen demisting/defrosting vent.
7. Passenger's airbag.
8. Glove box.
Passenger's airbag deactivation switch.
9. Hazard warning lamps button.
10. Audio system.
11. Heating / Air conditioning controls.
12. Ashtray / Cup holder.
13. Electric window switches.
14. Gear lever.
15. Parking brake.
Overview
.
7
Eco-driving
Eco-driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.
Optimise the use of your gearbox
Control the use of your electrical
equipment
With a manual gearbox, move off gently, change up without waiting and
drive by changing up quite soon.
With an automatic or electronic gearbox, stay in Drive "D" or auto "A",
according to the type of gearbox, without pressing the accelerator pedal
heavily or suddenly.
The gear shift indicator invites you to select the most suitable gear:
once the indication is displayed in the instrument panel, follow the
advice straight away.
For vehicles fitted with an electronic or automatic gearbox, this indicator
only appears in manual mode.
Before moving off, if the passenger compartment is too warm,
ventilate it by opening the windows and air vents before using the air
conditioning.
Above 30 mph (50 km/h), close the windows and leave the air vents
open.
Remember to make use of equipment that can help keep the
temperature in the passenger compartment down (window blinds...).
Switch off the air conditioning as soon as the desired temperature is
attained.
Switch off the demisting and defrosting controls, if not automatic.
Switch off the heated seat as soon as possible.
Switch off the headlamps and foglamp when the level of light does not
require their use.
Drive smoothly
Maintain a safe distance between vehicles, use engine braking rather
than the brake pedal, and press the accelerator progressively. These
practices contribute towards a reduction in fuel consumption and CO
emissions and also helps reduce the background traffic noise.
If your vehicle has cruise control, make use of the system at speeds
above 25 mph (40 km/h) when the traffic is flowing well.
8
Avoid running the engine before moving off, particularly in winter; your
vehicle will warm up much faster while driving.
2
As a passenger, if you avoid connecting your multimedia devices
(film, music, video game...), you will contribute towards limiting the
consumption of electrical energy, and so of fuel.
Disconnect your portable devices before leaving the vehicle.
Eco-driving
.
Limit the causes of excess consumption
Spread loads throughout the vehicle; place the heaviest items in the
bottom of the boot, as close as possible to the rear seats.
Limit the loads carried in the vehicle and reduce wind resistance (roof
bars, roof rack, bicycle carrier, trailer...). Use a roof box in preference.
Remove roof bars and roof racks after use.
At the end of winter, remove snow tyres and refit your summer tyres.
Observe the recommendations on
maintenance
Check the tyre pressures regularly, when cold, referring to the label in
the door aperture, driver's side.
Carry out this check in particular:
- before a long journey,
- at each change of season,
- after a long period out of use.
Don't forget the spare wheel and the tyres on any trailer or caravan.
Have your vehicle serviced regularly (engine oil, oil filter, air filter...) and
observe the schedule of operations recommended by the manufacturer.
When refuelling, do not continue after the 3
avoid any overflow.
At the wheel of your new vehicle, it is only after the first 1 800 miles
(3 000 kilometres) that you will see the fuel consumption settle down to
a consistent average.
rd
cut-off of the nozzle to
9
Monitoring
Instrument panel for petrol - Diesel
10
Dials
1. Rev counter (x 1 000 rpm).
2. Screen.
3. Speedometer (mph or km/h).
4. Reminder of service information
Reset the selected function to zero (trip
distance recorder or service indicator)
Adjust the time.
Screen
A. Electronic or automatic gearbox
information.
Gear shift indicator.
B. Time.
C. Range (miles or km)
or
Trip distance recorder.
D. Fuel gauge.
E. Service indicator (miles or km)
then,
total distance recorder.
These two functions are displayed
successively when switching on the ignition.
F. Speed limiter or cruise control settings.
Monitoring
Indicator and warning lamps
Visual indicators informing the driver that a system is in operation (operation or deactivation indicator lamps) or of the occurrence of a fault
(warning lamp).
When the ignition is switched on
Certain warning lamps come on for a few
seconds when the vehicle's ignition is
switched on.
When the engine is started, these same
warning lamps should go off.
If they remain on, before moving off, refer to the
information on the warning lamp concerned.
Associated warnings
The illumination of certain warning lamps may
be accompanied by an audible signal and a
message in the multifunction screen.
The warning lamps may come on continuously
(fixed) or flash.
Certain warning lamps may come on
in one of two different modes. Only by
relating the type of illumination to the
operating status of the vehicle can it
be ascertained whether the situation is
normal or whether a fault has occurred.
1
11
Monitoring
Operation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding system has come into operation.
fixed.The brake pedal must be pressed.With an electronic gearbox, press the brake pedal to
flashing.With an electronic gearbox, if you
hold the vehicle on an incline using
the accelerator for too long, the
clutch overheats.
Wait until the warning lamp goes off before starting.
The period of illumination of the warning lamp is
determined by the climatic conditions (up to about
thirty seconds in extreme climatic conditions).
If the engine does not start, switch the ignition off and
then on, wait until the warning lamp goes off again,
then start the engine.
Release the parking brake to switch off the warning
lamp, keeping your foot on the brake pedal.
Observe the safety recommendations.
For further information on the parking brake, refer to
the "Driving" section.
start the engine (lever in position N).
With an automatic gearbox, with the engine running,
press the brake pedal before releasing the parking
brake, to unlock the lever and come out of position P.
If you wish to release the parking brake without
pressing the brake pedal, this warning lamp will
remain on.
Use the brake pedal and/or the parking brake.
1
13
Monitoring
Deactivation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally.
This is may be accompanied by an audible signal and a message in the screen.
is set to the OFF position.
The passenger's front airbag is
deactivated.
You can install a rearward facing
child seat, unless there is a fault with
the operation of the airbags (Airbag
warning lamp on).
Set the control to the ON position to activate the
passenger's front airbag.
In this case, do not fit a child seat in the rearward
facing position.
14
ESP/ASRfixed.The button, located at the bottom
left of the dashboard, is pressed. Its
indicator lamp is on.
The ESP/ASR is deactivated.
ESP: electronic stability programme.
ASR: anti-slip regulation.
Press the button to activate the ESP/ASR. Its indicator
lamp goes off.
The ESP/ASR system is activated automatically when
the vehicle is started.
If deactivated, the system is reactivated automatically
from around 30 mph (50 km/h).
Monitoring
Warning lamps
When the engine is running or the vehicle is being driven, illumination of one of the following warning lamps indicates a fault which requires action on
the part of the driver.
Any fault resulting in the illumination of a warning lamp must be investigated further by reading the associated message in the screen.
If you encounter any problems, contact a CITROËN dealer or a qualified workshop.
The electronic brake force distribution
(EBFD) system has a fault.
system is too high.
The pressure in one or more wheels
is too low.
The system has fault: the tyre
pressures are no longer monitored.
You must stop as soon as it is safe to do so.
Top up with brake fluid listed by CITROËN.
If the problem persists, have the system checked by a
CITROËN dealer or a qualified workshop.
You must stop as soon as it is safe to do so.
Have it checked by a CITROËN dealer or a qualified
workshop.
Stop as soon as it is safe to do so.
Wait until the engine has cooled down before topping
up the level, if necessary.
If the problem persists, contact a CITROËN dealer or
qualified workshop.
Check the pressure of the tyres as soon as possible.
This check should preferably be carried out when the
tyres are cold.
You must reinitialise the system after the adjustment
of one or more tyre pressures and after changing one
or more wheels.
For more information, refer to the "Under-inflation
detection" section.
Check the tyre pressures as soon as possible.
Have the system checked by a CITROËN dealer or a
qualified workshop.
Low fuel levelfixed.When it first comes on there remains
approximately 5 litres of fuel in the
tank.
You must refuel as soon as possible to avoid running
out of fuel.
This warning lamp will come on every time the ignition
is switched on, until a sufficient addition of fuel is
made.
Fuel tank capacity: approximately 50 litres.
Never continue to drive until you run out of fuel as
this could damage the emission control and injection
systems.
18
Engine oil
pressure
Battery chargefixed.The battery charging circuit has a
Door(s) open /
Electric opening
boot lid open
fixed.There is a fault with the engine
fixed if the speed is
below 6 mph (10 km/h).
fixed and accompanied
by an audible signal
if the speed is above
6 mph (10 km/h).
lubrication system.
fault (dirty or loose terminals, slack or
cut alternator belt, ...).
A door or the electric opening boot is
still open.
You must stop as soon it is safe to do so.
Park, switch off the ignition and contact a CITROËN
dealer or a qualified workshop.
The warning lamp should go off when the engine is
started.
If it does not go off, contact a CITROËN dealer or a
qualified workshop.
Driver's seat
belt not fastened
or unfastened /
Front
passenger's seat
belt unfastened
Airbagson temporarily.This lamp comes on for a few
Power steeringfixed.The power steering has a fault.Drive carefully at reduced speed.
fixed or flashing
accompanied by an
increasing audible
signal.
fixed.One of the airbag or seat belt
The driver has not fastened or has
unfastened their seat belt.
The front passenger has unfastened
their seat belt.
seconds when you turn on the
ignition, then goes off.
pretensioner systems has a fault.
Pull the strap then insert the tongue in the buckle.
This lamp should go off when the engine is started.
If it does not go off, contact a CITROËN dealer or a
qualified workshop.
Have it checked by a CITROËN dealer or a qualified
workshop.
Have it checked by a CITROËN dealer or a qualified
workshop.
1
19
Monitoring
Service indicator
System which informs the driver when the
next service is due, in accordance with the
manufacturer's servicing schedule.
The point at which the service is due is
calculated from the last indicator zero reset. It
is determined by two parameters:
- the distance travelled,
- the time elapsed since the last service.
More than 1800 miles (3000 km)
remain before the next service is due
When the ignition is switched on, no service
information appears in the screen.
Between 600 miles (1 000 km)
and 1800 miles (3 000 km) remain
before the next service is due
For a few seconds after the ignition is switched
on, the spanner symbolising the service
operations comes on. The distance recorder
display line indicates the distance remaining
before the next service is due.
Example: 1 700 miles (2 800 km) remain
before the next service is due.
For a few seconds after the ignition is switched
on, the screen indicates:
A few seconds after the ignition is switched on,
the spanner goes off; the distance recorder
resumes its normal operation. The screen then
indicates the total and trip distances.
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 560 miles (900 km) remain before
the next service is due.
For a few seconds after the ignition is switched
on, the display indicates:
A few seconds after the ignition is switched
on, the distance recorder resumes its normal
operation. The spanner remains on to
indicate that a service must be carried out
soon.
20
Service overdue
For a few seconds after the ignition is switched
on,the spanner flashes to indicate that the
service must be carried out as soon as possible.
Example: the service is overdue by 180 miles
(300 km).
For a few seconds after the ignition is switched
on, the display indicates:
Service indicator
zero reset
Monitoring
1
Retrieving the service
information
You can access the service information at
any time.
F Press the trip distance recorder zero reset
button.
The service information is displayed for a
few seconds, then disappears.
A few seconds after the ignition is switched
on, the distance recorder resumes its normal
operation. The spanner remains on.
The distance remaining may be
weighted by the time factor, depending
on the driver's driving habits.
Therefore, the spanner may also come
on if you have exceeded the period
since the last service, indicated in the
manufacturer's service schedule.
After each service, the service indicator must
be reset to zero.
The procedure for resetting to zero is as
follows:
F switch off the ignition,
F press and hold the trip distance recorder
zero reset button,
F switch on the ignition; the distance recorder
display begins a countdown,
F when the display indicates "=0", release
the button; the spanner disappears.
Following this operation, if you wish to
disconnect the battery, lock the vehicle
and wait at least five minutes for the
zero reset to be taken into account.
21
Monitoring
Distance recorders
Total distance recorder
System which measures the total distance
travelled by the vehicle during its life.
The total and trip distances are displayed for
thirty seconds when the ignition is switched off,
when the driver's door is opened and when the
vehicle is locked or unlocked.
Trip distance recorder
System which measures a distance travelled
during a day or other period since it was reset
to zero by the driver.
F With the ignition on, press the button until
zeros appear.
22
Monitoring
Setting the date and time
Instrument panelAudio system / Bluetooth
Use the left-hand button on the instrument
panel to carry out the operations in the
following order:
F press the button for more than
two seconds: the minutes flash,
F press the button to increase the minutes,
F press the button for more than
two seconds: the hours flash,
F press the button to increase the hours,
F press the button for more than
two seconds: 24H or 12H is displayed,
F press the button to select 24H or 12H,
F press the button for more than two seconds
to complete the adjustments.
After approximately 30 seconds without any
action, the screen returns to the normal display.
Use the audio system buttons to carry out the
operations in the following order:
F press the "MENU" button,
F using the arrows, select the
"Personalisation - Configuration" menu
then confirm by pressing the control knob,
1
F using the arrows, select the "Screen
configuration" menu then confirm,
F using the arrows, select the "Set date and
time" menu then confirm,
F select the setting then confirm,
F modify the setting then confirm again to
register the modification,
F adjust the settings one by one, confirming
each time,
F select the "OK" tab in the screen then
confirm to exit the "Set date and time"
menu.
23
Monitoring
Trip computer
System that gives you information on the current journey (range, fuel consumption…).
Screen in instrument panel
24
Monochrome screen C
Information displays
F Press the button, located at the end of the
wiper stalk, to display the various items of
trip computer information in succession.
The trip computer provides the following
information:
- range,
- current fuel consumption,
- distance travelled,
- average fuel consumption,
- average speed.
F The next press then returns you to the
normal display.
Zero reset
F Press the control for more than
two seconds to reset to zero the distance
travelled, the average fuel consumption
and the average speed.
Trip computer, a few definitions
Range
(km)
The number of kilometres which
can be covered with the fuel
remaining in the tank. Related
to the average fuel consumption
over the last few kilometres
travelled.
This value may vary following a change
in the style of driving or the relief,
resulting in a significant change in the
current fuel consumption.
When the range falls below 30 km, dashes are
displayed. After filling with at least 5 litres of
fuel, the range is recalculated and is displayed
when it exceeds 100 km.
Current fuel consumption
(l/100 km or km/l)
Calculated during the last
few seconds.
This function is only displayed from
30 km/h.
Average fuel consumption
(l/100 km or km/l)
Calculated since the last trip reset.
Monitoring
1
Distance travelled
(km)
Calculated since the last trip
reset.
If dashes are displayed continuously
while driving in place of the digits,
contact a CITROËN dealer or a
qualified workshop.
Average speed
(km/h)
Calculated since the last trip reset.
25
Monitoring
Monochrome screen C (Audio system / Bluetooth)
Displays in the screenControls
This displays the following information:
- time,
- date,
- ambient temperature (this flashes if there is
a risk of ice),
- status of doors and boot,
- parking sensors,
- audio sources (radio, CD, USB port,
jack socket...),
- trip computer (refer to the "Instruments and
controls" section).
Warning or information messages may appear
temporarily. These can be cleared by pressing
the "BACK" button.
From your Audio system / Bluetooth control
panel, you can press:
F the "MENU" button to gain access to the
main menu,
F the "MODE" button to select the display
of information in "Full screen" or "New
window" mode,
F the "7" or "8" buttons to navigate in a list,
F press the central button to confirm,
or
F the "BACK" button to abandon the
operation in progress or go back up one
level in the menu.
Main menu
F Press the "MENU" button to gain access
to the main menu:
- "Multimedia",
- "Telephone",
- "Trip computer",
- "Bluetooth connection",
- "Personalisation-configuration",
F Press the "7" or "8" buttons to select the
menu required, then confirm by pressing
the centre button.
26
Monitoring
1
"Multimedia" menu
With the Audio system / Bluetooth switched
on, once this menu has been selected you can
activate or deactivate the functions linked with
use of the radio, CD or the MP3 player (USB
port / jack socket).
For more information on the "Multimedia"
application, refer to the Audio system /
Bluetooth part of the "Audio and Telematics"
section.
"Telephone" menu
With the Audio system / Bluetooth switched
on, once this menu has been selected you can
make a call and refer to the different telephone
contacts lists.
For more information on the "Telephone"
application, refer to the Audio system /
Bluetooth part of the "Audio and Telematics"
section.
"Trip computer" menu
Once this menu has been selected, you can
consult information concerning the status of the
vehicle.
Alert log
This summarises the status and alert
messages of the functions, displaying them in
succession in the multifunction screen.
F Press the "MENU" button to gain access
to the general menu.
F Press the double arrows, then the centre
button to select the "Trip computer"
menu.
F In the "Trip computer" menu, select the
"Alert log" line and confirm.
27
Monitoring
"Bluetooth
connection" menu
With the Audio system / Bluetooth switched
on, once this menu has been selected you
can connect or disconnect a Bluetooth device
(telephone, media player) and define the
connection mode (hands-free kit, playing audio
files).
For more information on the "Bluetooth
connection" application, refer to the Audio
system / Bluetooth part of the "Audio and
Telematics" section.
"PersonalisationConfiguration" menu
Once this menu has been selected, you can
gain access to the following functions:
- "Define the vehicle parameters",
- "Choice of language",
- "Display configuration".
Dene the vehicle parameters
Once this menu has been selected, you can
activate or deactivate the following equipment,
classified by category:
- "Driving assistance",
- "Driving lighting",
- "Comfort lighting".
28
Loading...
+ 255 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.