CENTRAL BRASS 0054 Installation Manual

Service Sink Faucet

Rigid Pail Hook Spout

Compression Stem Assemblies

Replaceable Seats

0054 Series

Service Sink Faucet with Wall Brace

and Vacuum Breaker

CENTRAL BRASS MFG CO

2950 East 55th Street, Cleveland, Ohio 44127

Phone: [phone] Fax: [phone] Email: sales @CentralBrass.com

022703 I-0054

www.CentralBrass.com

CENTRAL BRASS

INSTALLATION INSTRUCTIONS

"U" Flange Shown

ROUGH-IN Instructions

1. Install supply lines and provide supports.

2. Install wood framing for mounting spout support flange.
Be sure framing is

secure and properly located.

3. Install finished wall.

FAUCET Installation

1. Install flange arms to supply pipes and adjust location
to match 8-inch center connection to faucet.

2. Mount faucet to flange arms and tighten coupling nuts
and flanges.

3. Attach support rod to spout use adjustment to assure
spout is properly supported. Install support wall
bracket with screws provided.

4. (For items with Intergal stops) Adjust intergal stop
to meter maximum flow.

CENTRAL BRASS MFG CO

2950 East 55th Street, Cleveland, Ohio 44127

Phone: [phone] Fax: [phone] Email: sales @CentralBrass.com

022703 I-0054

www.CentralBrass.com