CONTENTS
4 Congratulations
5 About your espresso machine
6 Catler recommends safety rst
8 Know your Espresso Machine ES 8010
10 Assembling your Espresso Machine ES 8010
12 Operating your Espresso Machine ES 8010
17 How to froth milk for a cappuccino or Latté
20 Using the hot water function
21 Co ee making tips
24 Care and cleaning
28 Trouble shooting guide
32 Co ees to try
R1 Recipes
CONTENTS
33
Congratulations
on the purchase of your new Espresso Machine ES 8010
4
4
CONGRATULATIONS
From its heavy-duty housing and professional-grade functionality through to its
superior and easy operation, Espresso Machine ES 8010 was designed for the true
co ee connoisseur.
In developing this booklet, our goal was to provide you with the fundamental point
from which you can start to discover the incredible versatility of your Espresso
Machine; the Espresso Machine that delivers simply superior co ee. Our hope is that
with each page, you gain increasing pleasure from your Espresso Machine and its
ability to help you create a wonderfully broad range of avour-rich co ees.
We would just like to say thank you and…
enjoy.
CONGRATULATIONS
55
CATLER RECOMMENDS SAFETY FIRST
We at Catler are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer foremost in mind.
In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions:
IMPORTANT SAFEGUARDS FOR YOUR ESPRESSO MACHINE ES 8010 AND FOR ALL ELECTRICAL APPLIANCES
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure
that they will not play with the appliance.
• Carefully read all instructions before
operating and save for future reference.
• Do not place the Espresso Machine near the
edge of a bench or table during operation.
Ensure the surface is level, clean and free of
water.
• Remove any promotional stickers before
using the Espresso Machine for the rst time.
• Do not place the Espresso Machine on or
near a hot gas or electric burner, or where it
could touch a heated oven.
• Always make sure the Espresso Machine is
properly assembled before connecting to
power outlet and operating.
• Use only cold water in the water tank. Do
not use any other liquid.
• Never use the Espresso Machine without
water in the water tank.
• Warning: Do not remove the Water Tank
while the Espresso Machine is in use.
• Ensure the lter holder is rmly inserted and
secured into the brewing head before using
the machine.
• Never remove the lter holder during the
brewing operation as the machine is under
pressure.
• Do not leave the Espresso Machine
unattended when in use.
• Do not touch hot surfaces. Allow the
Espresso Machine to cool down before
moving or cleaning any parts.
• Do not place anything, other than cups for
warming, on top of the Espresso Machine.
• Always switch the Espresso Machine o ,
then switch o at the power outlet and
then unplug if appliance is to be left
unattended, if not in use, before cleaning,
before attempting to move the appliance,
disassembling, assembling and when
storing the appliance.
• Keep the appliance and accessories clean.
Follow the cleaning instructions provided in
this book.
• Unwind the cord before use.
• To protect against electric shock, do not
immerse cord, plug or appliance in water or
any other liquid.
• Do not let the cord hang over the edge of
a table or counter, touch hot surfaces, or
become knotted.
• It is recommended to inspect the appliance
regularly. Do not use the appliance if power
supply cord, plug or appliance becomes
damaged in anyway. Return the entire
appliance to the nearest authorised Catler
service centre for examination and/or repair.
• Any maintenance other than cleaning
should be performed at an authorised Catler
Service Centre.
• This appliance is for household use only. Do
not use this appliance for anything other
than its intended use. Do not use in moving
vehicles or boats. Do not use outdoors.
• The installation of a residual current
device (safety switch) is recommended to
provide additional safety protection when
using electrical appliances. It is advisable
that a safety switch with a rated residual
operating current not exceeding 30mA be
installed in the electrical circuit supplying
the appliance. See your electrician for
professional advice.
6
CATLER RECOMMENDS SAFETY FIRST
KNOW YOUR ESPRESSO MACHINE ES 8010
Extra large cup warming plate
15 bar pump
Italian designed and made
Solid chromed brass
lter holder
Removable 2.2 litre water tank
can be lled from the front
of the machine
Extra large cup height
for co ee mugs
Removable 1 litre drip
tray and grid
Hot water button
press while the Selector Control is
turned to ‘Steam’ to utilise hot water
function (
Steam button
will illuminate to indicate that the
steam function is selected
Brew Head
for easy tment of the lter holder
1 and 2 cup dual wall stainless
steel lters (not shown)
Pre-brew function:
for optimum co ee extraction
pressure
).
8
KNOW YOUR ESPRESSO MACHINE ES 8010
Auto purge function:
for optimum co ee extraction
temperature
Power On/O button
surround illuminates when the
button is pressed
‘Heating’ light
illuminates in red
Thermoblock heating system
ensures co ee is extracted at the
correct temperature
Advanced dual wall
crema system
for the perfect crema
External viewing back-lit
water window
Drip tray full indicator
Storage tray – located behind
the drip tray for storage
of accessories
Selector Control
for Espresso
, Standby (I)
and Steam
Swivel steam wand with
stainless steel frothing
attachment – easily adjusted to
perfect position for frothing milk
Accessories (not shown in picture)
Custom designed stainless steel
frothing jug
Custom designed measuring/
tamping spoon
Custom designed cleaning tool
KNOW YOUR ESPRESSO MACHINE ES 8010
99
ASSEMBLING YOUR ESPRESSO MACHINE ES 8010
Your Espresso Machine will have the Drip Tray,
Storage Tray and Water Tank in place when you
unpack it from the box.
The Storage Tray is located at the base of the
machine against the back wall. The Drip Tray
is located in the base of the machine in front
of the Storage Tray. The Water Tank is located
over the Drip Tray, in the front opening of the
machine.
The 2 stainless steel Filters, Cleaning Tool,
Measuring/tamping Spoon, Filter Holder and
Frothing Jug will all be packed inside the
foam packaging. Ensure you have located all
parts and accessories before throwing out the
packaging.
The Storage Tray is a convenient location to
store the Cleaning Tool, stainless steel lters
and Measuring/tamping Spoon when not in
use, so they are not misplaced.
Remove the Drip Tray, Water Tank and Storage
Tray and wash all parts and accessories in
warm, soapy water using a non-abrasive
washing liquid. Rinse and dry thoroughly.
NOTE:
Do not clean any of the parts or
accessories in the dishwasher
TO REASSEMBLE: STEP 1
Insert the Storage Tray into the base of the
machine and slide in towards the back wall. This
is a convenient location to store the Cleaning
Tool, stainless steel Filters and Measuring/
tamping Spoon when not in use, so they are
not misplaced.
10
ASSEMBLING YOUR ESPRESSO MACHINE ES 8010
Before rst use: It is recommended to complete
a water brewing operation without ground
co ee before brewing your rst espresso co ee
to ensure that all internal piping has been
preheated (follow Steps 1 and 4 in Operating
your Espresso Machine – Pages 13 and 15).
STEP 2
Place the Drip Tray full Indicator into the the
Drip Tray and then place the stainless steel grid
on top. Slide the Drip Tray into the base of the
machine in front of the Storage Tray.
STEP 3
Slide the Water Tank over the Drip Tray and
into the front opening of the machine and into
position above the Storage Tray. Ensure the
Water Tank aligns ush with the sides of the
machine.
ASSEMBLING YOUR ESPRESSO MACHINE ES 8010
1111
Operating
SESTAVENÍ VAŠEHO ESPRESSA ES 8010
1212