Casio TK-7500, TK-6500, CE-7000, TK-T500, TK-6000 Manual

(CE-T300)

(CE-6000/6100)

ELECTRONIC CASH REGISTER

CE-7000, TK-7000/7500 TK-6000/6500 TK-T500

DEALER'S MANUAL

Version 1.4 June 2001

Eu Di U.K.

CI Canada

Introduction & Contents

This manual is intended to be used as a reference to the CE-7000, TK-7000/7500, TK-6000/6500, CE-6000/6100, CE-T300 and TK-T500 system. It provides details to allow whole understanding of the system capabilities, its operation, and how it can be used to solve many problems within the retail outlet.

This manual consists of the following chapters:

1.Hardware configuration (for installation)

This chapter describes the hardware of these models and their network systems.

2.IPL (initial program loading)

This chapter describes how to download the application program to the terminal.

3.Initialization

This chapter describes how to set up the peripheral devices and the terminals.

4.Programming

This chapter explains actual programming procedure and functions.

5.Manager mode

6.X/Z report

7.Consolidation

8.Application system

9.Tips

10.Appendix:

Printing history

Manual version			Software version
Version 0.1.0 : February 2000		Tentative edition	Version -.-.-
Version 1.0.0 : March 2000			Version 1.0
Version 1.0.1 : May 2000		TK-T500 (CE-T300) added	Version 1.0
Version 1.1.0 : June 2000		Programmable error/guidance message	Version 1.1
Version 1.2.0 : July 2000		Australian GST	Version 1.2
Version 1.3	: August 2000	Improvement of efficiency	Version 1.3
Version 1.4	: June 2001	Modify Euro setup	Version 1.4

Revised points

Version 1.01 :	• Add CE-T300 and TK-T500 features
Version 1.1.0 :	• Error message file and guidance message files are allocatable and programmable.
	If these files are not allocated, the default messages are used.
Version 1.2.0 :	• Australian GST
	• Add an option to print consecutive number range of the day on daily fixed total report.
	• Vacant record search (arrangement program)
Version 1.3 :	• High speed slip printing option is available.
	• Record designation is not necessary for batch maintenance PLU programming.
	• Single item status is not effective after <NORMAL RECEIPT> registration.
Version 1.4 :	• Modify the Euro setup procedure.
	• Increase the maximum number of the scanning PLU items up to 20,000.
	• Increase the maximum number of the records of “character recall” and “scheduler” file.

Version 1.4

2

Introduction & Contents

CE-7000/TK-7000/TK-7500/TK-T500/TK-6000/TK-6500 Dealer's Manual

3

Introduction & Contents
System configuration ........................................................................................	11
Hardware configuration ..............................................................................................	11
General configuration ......................................................................................................................	11
Hardware diagram ...........................................................................................................................	12
Input/output connectors ...................................................................................................................	13
In/online configuration ................................................................................................	14
Peripheral ports and their connectable devices ...............................................................................	14
Inline system ....................................................................................................................................	16
IPL (Initial program loading)..............................................................................	19
Memory map of the terminal .......................................................................................	19
System configuration and procedure ........................................................................	19
Via COM port ...................................................................................................................................	19
Via inline ..........................................................................................................................................	20
Via memory cassette (to send the IPL data to memory cassette) ...................................................	20
Via memory cassette (to send the IPL data to register) ...................................................................	21
To send IPL data to ECR via COM1 port .........................................................................................	21
Initialization ........................................................................................................	23
Machine initialization procedure ................................................................................	23
Flag clear operation .....................................................................................................	25
Init 2 operation .............................................................................................................	26
Entering diag mode .....................................................................................................	26
Password ......................................................................................................................	26
Programming (General explanation) ................................................................	27
Program sub mode (P1 thru P7 mode) ......................................................................	27
Entering the program sub mode ......................................................................................................	27
File allocation (Program 5) ................................................................................	29
File allocation program ...............................................................................................	29
Programming procedure ..................................................................................................................	29
Issuing program reading report of program 5 mode ................................................	33
Issuing procedure ............................................................................................................................	33
Report sample .................................................................................................................................	33
Key allocation (Program 4) ................................................................................	35
Key allocation program ...............................................................................................	35
Programming procedure ..................................................................................................................	35
Configuration of the physical key layout ...................................................................	36
Issuing program reading report of program 4 mode ................................................	38
Issing procedure ..............................................................................................................................	38
Report sample .................................................................................................................................	38
Key function/machine feature (Program 3) ......................................................	39
General function program ...........................................................................................	39
Programming procedure ..................................................................................................................	39
Program data (by address code) .....................................................................................................	39
Department key/flat-PLU key/PLU program (Batch feature programming) ............	57
Programming procedure ..................................................................................................................	57
Program data ...................................................................................................................................	57
Department key/flat-PLU key/PLU/subdepartment program
(Individual feature programming) ..........................................................................	59
Programming procedure ..................................................................................................................	59
Program data (by address code) .....................................................................................................	59

4

Transaction key program ............................................................................................	62
Programming procedure ..................................................................................................................	62
Program data ...................................................................................................................................	62
Clerk program ..............................................................................................................	86
Secret number, drawer, check number programming ......................................................................	86
Clerk detail link programming ..........................................................................................................	86
Clerk other programmings ...............................................................................................................	87
Other programs ............................................................................................................	89
Time range programming ................................................................................................................	89
Table range programming ................................................................................................................	89
Tax table programming ....................................................................................................................	90
Set menu programming ...................................................................................................................	95
Batch X/Z report programming ........................................................................................................	95
Hourly item (time range) programming ............................................................................................	96
Hourly item (link item) programming ................................................................................................	96
Arrangement programming ..............................................................................................................	97
Check print control programming.....................................................................................................	97
Mix & match programming ...............................................................................................................	98
Scheduler programming ..................................................................................................................	99
Bottle link table programming ........................................................................................................	101
Terminal connection table programming ........................................................................................	101
I/O parameter programming ..........................................................................................................	102
Printer connection table programming ...........................................................................................	103
Non PLU table programming .........................................................................................................	104
Scanning PLU maintenance programming .............................................................	105
Batch maintenance PLU programming ..........................................................................................	105
Activation of batch maintenance PLU ............................................................................................	105
Not found PLU maintenance programming ...................................................................................	106
Activation of Not found PLU maintenance .....................................................................................	106
Scanning PLU direct maintenance programming ..........................................................................	107
One touch NLU programming ........................................................................................................	109
Issuing program reading report of program 3 mode ..............................................	110
Issuing procedure ..........................................................................................................................	110
Report sample ...............................................................................................................................	110
Character (Program 2) .....................................................................................	111
Programming descriptors .........................................................................................	111
Programming procedure ................................................................................................................	111
Data ...............................................................................................................................................	111
Programming item/key descriptors..........................................................................	117
Programming procedure ................................................................................................................	117
Data ...............................................................................................................................................	117
Programming item/clerk descriptors by range .......................................................	119
Programming procedure ................................................................................................................	119
Program data .................................................................................................................................	119
By character keyboard ...................................................................................................................	120
Entering characters ...................................................................................................	122
By character code ..........................................................................................................................	122
Editing characters .....................................................................................................	123
Correcting a character just entered ...............................................................................................	123
Correcting a PLU descriptor already set ........................................................................................	123
Correcting a key descriptor already set .........................................................................................	123
Correcting a message descriptor already set ................................................................................	123
Issuing program reading report of program 2 mode ..............................................	124
Issuing procedure ..........................................................................................................................	124
Report sample ...............................................................................................................................	124

Introduction & Contents

CE-7000/TK-7000/TK-7500/TK-T500/TK-6000/TK-6500 Dealer's Manual

5

Introduction & Contents
Unit price/rate (Program 1) ..............................................................................	125
Date/time setting ........................................................................................................	125
Date setting ....................................................................................................................................	125
Time setting ...................................................................................................................................	125
Unit price program .....................................................................................................	125
Programming procedure ................................................................................................................	125
Rate program .............................................................................................................	127
<CURRENCY EXCHANGE> .........................................................................................................	127
<CHECK>, <NEW BALANCE>, <PREMIUM (%+)>, <DISCOUNT (%–)>, <RATE TAX> .............	127
Amount program ........................................................................................................	127
<CASH>, <CHECK>, <NEW BALANCE>, <PLUS (+)>, <MINUS (–)>, <COUPON> ...................	127
Scanning PLU direct maintenance programming ..........................................................................	127
Issuing program reading report of program 1 mode ..............................................	128
Issuing procedure ..........................................................................................................................	128
Report sample ...............................................................................................................................	128
Program reading (Program 6) .........................................................................	129
Issuing program reading report ...............................................................................	129
Issuing procedure ..........................................................................................................................	129
Report code ...................................................................................................................................	129
Report sample ............................................................................................................	130
Fixed total ......................................................................................................................................	130
Transaction key .............................................................................................................................	130
Subdepartment ..............................................................................................................................	130
PLU ................................................................................................................................................	131
Department ....................................................................................................................................	132
Group .............................................................................................................................................	132
Cashier/clerk ..................................................................................................................................	133
Hourly sales ...................................................................................................................................	133
Scanning PLU ................................................................................................................................	133
Table analysis ................................................................................................................................	134
Grand total .....................................................................................................................................	134
General function ............................................................................................................................	134
Special character ...........................................................................................................................	134
Report header ................................................................................................................................	135
Tax table ........................................................................................................................................	135
Set menu table...............................................................................................................................	135
Batch X/Z .......................................................................................................................................	135
Cashier detail link ..........................................................................................................................	136
Hourly item (Item) ..........................................................................................................................	136
Receipt message ...........................................................................................................................	136
Check endorsement .......................................................................................................................	136
Slip/external printer message ........................................................................................................	136
Arrangement table .........................................................................................................................	137
Character recall .............................................................................................................................	137
Non-PLU table ...............................................................................................................................	137
Check print control ........................................................................................................................	137
Mix & match ...................................................................................................................................	137
PLU 2nd @ ....................................................................................................................................	138
Scheduler.......................................................................................................................................	138
Order character ..............................................................................................................................	139
Bottle link table ..............................................................................................................................	139
One touch NLU ..............................................................................................................................	139
Hourly item (Time zone) ................................................................................................................	139
Terminal connection table ..............................................................................................................	139
Printer connection table .................................................................................................................	140
Version 1.1.0

6

AT command ..................................................................................................................................	140
Online password ............................................................................................................................	140
I/O parameter .................................................................................................................................	140
Miscellaneous message ............................................................................................................	140-1
Printing guidance message .......................................................................................................	140-1
Error message ...........................................................................................................................	140-1
Registration guidance message ................................................................................................	140-2
X/Z guidance message ..............................................................................................................	140-2
Program guidance message ......................................................................................................	140-2
Auto-program & system utilities (Program 7) ...............................................	141
Auto-programming ....................................................................................................	141
Auto-programming functions..........................................................................................................	141
Auto-programming operation .........................................................................................................	145
Other utilities ..................................................................................................................................	146
Manager operation ...........................................................................................	149
Manager control mode (X1 mode) ............................................................................	149
Entering the manager control mode ..............................................................................................	149
Assign drawers for each clerk ........................................................................................................	149
Stock quantity maintenance (PLU/flat PLU only) ...................................................	150
To add to the actual stock quantity of a PLU/flat PLU....................................................................	150
To subtract from the actual stock quantity of a PLU/flat PLU .........................................................	150
To input the new stock quantity of a PLU/flat PLU .........................................................................	151
Clerk assignment .......................................................................................................	151
To link clerk button/key to interrupt buffers ....................................................................................	151
To link clerk secret numbers to interrupt buffers ............................................................................	151
To link clerk numbers to clerk number keys ...................................................................................	151
Programming for the Euro ........................................................................................	152
Programming for the Australian GST ......................................................................	154
Programming of items in the program 1 mode .......................................................	154
To enter the program 1 mode ........................................................................................................	154
To exit the program 1 mode ...........................................................................................................	154
Read/reset report issuance .............................................................................	155
Preparation for issuing report ..................................................................................	155
Money declaration .........................................................................................................................	155
Password (X2/Z2 mode) ................................................................................................................	155
Issuing read/reset report ..........................................................................................	155
Programmability .............................................................................................................................	156
Issuing procedure ..........................................................................................................................	156
Report sample ...............................................................................................................................	160
Financial report ..............................................................................................................................	160
Individual item/key report ...............................................................................................................	160
Fixed total report ............................................................................................................................	161
Transaction key report ...................................................................................................................	162
Subdepartment report ....................................................................................................................	162
PLU report .....................................................................................................................................	163
PLU stock report ............................................................................................................................	164
Department report ..........................................................................................................................	165
Group report ..................................................................................................................................	166
Clerk report ....................................................................................................................................	167
Hourly sales report.........................................................................................................................	168
Monthly report ................................................................................................................................	168
Table analysis report ......................................................................................................................	169
Hourly item report ..........................................................................................................................	169
Open check report .........................................................................................................................	170
Scanning PLU report .....................................................................................................................	170
	Version 1.4

Introduction & Contents

CE-7000/TK-7000/TK-7500/TK-T500/TK-6000/TK-6500 Dealer's Manual

7

Introduction & Contents
Not found PLU report .....................................................................................................................	172
Mix & match report.........................................................................................................................	172
File reset ........................................................................................................................................	173
Consolidation ...................................................................................................	175
X/Z consolidation .......................................................................................................	175
X consolidation processing ............................................................................................................	175
Z consolidation processing (except for scanning PLU) ..................................................................	176
Z consolidation processing (for scanning PLU) .............................................................................	176
Scanning PLU maintenance by consolidating the not found PLU file ............................................	177
Standalone Z consolidation processing (except for scanning PLU) ..............................................	177
X/Z consolidation execution .....................................................................................	178
Consolidate terminal by terminal ...................................................................................................	178
Consolidate by group No./all terminal ............................................................................................	178
Consolidate individual clerk report by group No./all terminal .........................................................	179
Execute file reset command to all terminal ....................................................................................	179
X/Z consolidation report sample ..............................................................................	180
Z consolidation...............................................................................................................................	180
X consolidation ..............................................................................................................................	180
Application systems ........................................................................................	181
Scanning PLU ............................................................................................................	181
System configuration of the scanning PLU system .......................................................................	181
Barcode system .............................................................................................................................	181
PLU maintenance ..........................................................................................................................	182
Scanning PLU registration .............................................................................................................	183
Mix & match discount .....................................................................................................................	185
Printing on the external printers ..............................................................................	187
System configuration of the external printer system ......................................................................	187
Backup system ..............................................................................................................................	187
Printing control options for order ....................................................................................................	188
Tips ....................................................................................................................	189
Future order ...............................................................................................................	189
Usage ............................................................................................................................................	189
Preparation ....................................................................................................................................	189
Eat-in/takeout .............................................................................................................	189
Automatic execution of Euro switchover by arrangement and scheduler ...........	190
Appendix: Calculation method .......................................................................	191
Fixed total file.............................................................................................................	191
Appendix: Font code tables ............................................................................	193
Standard font set (default) ........................................................................................	193
Multilingual + Euro (Windows code page 858) ..............................................................................	193
Special font set ..........................................................................................................	194
Slavic (Windows code page 852) ..................................................................................................	194
Greek .............................................................................................................................................	194
Cyrillic (Windows code page 866) .................................................................................................	195
Baltic ..............................................................................................................................................	195
Arabic.............................................................................................................................................	196
Appendix: Peripheral device configuration ...................................................	197
UP-350.........................................................................................................................	197
UP-250.........................................................................................................................	197
SP-1300 .......................................................................................................................	198
Quick scan 6000.........................................................................................................	198
NCI 6710......................................................................................................................	198
Version 1.4

8

Appendix: File record format ..........................................................................	199
Fixed total file.............................................................................................................	199
Fixed total (daily) ...........................................................................................................................	199
Fixed total (periodic/consolidation) ................................................................................................	199
Transaction key file ...................................................................................................	200
Transaction key (daily) ...................................................................................................................	200
Transaction key (periodic/consolidation) .......................................................................................	200
Subdepartment file ....................................................................................................	200
Subdepartment (daily) ...................................................................................................................	200
Subdepartment (periodic/consolidation) ........................................................................................	200
PLU file .......................................................................................................................	201
PLU (daily) .....................................................................................................................................	201
PLU (periodic/consolidation) ..........................................................................................................	201
PLU 2nd unit price (program) ........................................................................................................	201
Department file ..........................................................................................................	202
Department (daily) .........................................................................................................................	202
Department (periodic/consolidation) ..............................................................................................	202
Group file ....................................................................................................................	203
Group (daily) ..................................................................................................................................	203
Group (periodic/consolidation) .......................................................................................................	203
Clerk file......................................................................................................................	204
Clerk (programming) ......................................................................................................................	204
Clerk detail (daily, periodic/consolidation) ......................................................................................	204
Clerk detail link (program) ..............................................................................................................	204
Hourly sales file .........................................................................................................	205
Hourly sales (daily) ........................................................................................................................	205
Hourly sales (periodic/consolidation) ............................................................................................	205
Monthly sales file .......................................................................................................	205
Monthly sales (daily, periodic/consolidation) ..................................................................................	205
Scanning PLU files ....................................................................................................	206
Scanning PLU file (daily) ...............................................................................................................	206
Not found PLU file (daily) ...............................................................................................................	206
Non PLU table file (program) .........................................................................................................	206
Batch maintenance PLU file (program) ..........................................................................................	206
Direct maintenance PLU file (program) .........................................................................................	206
Not found PLU maintenance file (program) ...................................................................................	206
One touch NLU table file ................................................................................................................	207
Mix & match file .........................................................................................................	207
Mix & match file (daily)...................................................................................................................	207
Mix & match file (periodic/consolidation) .......................................................................................	207
Bottle link table file ....................................................................................................	207
Bottle link table file (program) ........................................................................................................	207
Table analysis file ......................................................................................................	208
Table analysis (daily) .....................................................................................................................	208
Table analysis (periodic/consolidation) ..........................................................................................	208
Grand total file ...........................................................................................................	208
Grand total (daily) ..........................................................................................................................	208
Grand total (consolidation).............................................................................................................	208
Hourly item file ...........................................................................................................	209
Hourly item sales file ......................................................................................................................	209
Hourly item link file.........................................................................................................................	209
Hourly item time range file .............................................................................................................	209
General control file ....................................................................................................	210
General control ..............................................................................................................................	210
	Version 1.1.0
CE-7000/TK-7000/TK-7500/TK-T500/TK-6000/TK-6500 Dealer's Manual	9

Introduction & Contents

Introduction & Contents
Special character file .................................................................................................	211
Special character ...........................................................................................................................	211
Report header file ......................................................................................................	212
Report header ................................................................................................................................	212
Tax table file ...............................................................................................................	212
Tax table ........................................................................................................................................	212
Set menu table file .....................................................................................................	212
Set menu table ...............................................................................................................................	212
Batch X/Z file ..............................................................................................................	213
Batch X/Z .......................................................................................................................................	213
Receipt message file .................................................................................................	213
Receipt message ...........................................................................................................................	213
Check endorsement message file ............................................................................	213
Check endorsement message .......................................................................................................	213
Slip/external printer message file ............................................................................	213
Slip/external printer message ........................................................................................................	213
Arrangement file ........................................................................................................	214
Arrangement file ............................................................................................................................	214
Character recall file ...................................................................................................	214
Character recall .............................................................................................................................	214
Check print file ...........................................................................................................	214
Check print .....................................................................................................................................	214
Scheduler file .............................................................................................................	214
Scheduler .......................................................................................................................................	214
Order character file ....................................................................................................	214
Order character ..............................................................................................................................	214
System files ................................................................................................................	215
Character key table file ..................................................................................................................	215
Key table file ..................................................................................................................................	216
Terminal connection table file ........................................................................................................	217
Printer connection table .................................................................................................................	217
Operation start date file .................................................................................................................	217
Initialize code file ...........................................................................................................................	217
AT command file ............................................................................................................................	217
Online password file ......................................................................................................................	218
I/O parameter table file ..................................................................................................................	218
System error log file .......................................................................................................................	218
Graphic image files....................................................................................................	218
Graphic logo file .............................................................................................................................	218
Watermark print file ........................................................................................................................	218
Guidance message files .........................................................................................	218-1
Error message file ......................................................................................................................	218-1
Guidance message file ..............................................................................................................	218-5
Appendix: Compulsory ....................................................................................	219
Appendix: Error code .......................................................................................	221
Index .................................................................................................................	225

Version 1.1.0

10

System configuration

Hardware configuration

General configuration

1Operator display

7

	2Customer display (Pop-up)
	3Stroke keyboard
	4Touch keyboard	8
	5Sheet holder
	6Memory cassette door
	(except for CE-6000/6100, CE-T300, TK-T500)
	7Printer cover
	8Printer sub cover
	9Mode switch

6

TK-6000/7000/T500 2

7

1

8

9

3

4, 5

7

8

6

6

CE-6000/6100/7000/T300

2

1

9

3

TK-6500/7500

2

1

9

4

Version 1.0.1

System configuration

CE-7000/TK-7000/TK-7500/TK-T500/TK-6000/TK-6500 Dealer's Manual

11

System configuration

Hardware diagram

CE-7000, TK-7000/7500, TK-T500

Pop up display Main display

Power supply

Note: Shadowed device and dot line indicate option devices.

*1 Refer to the in/online configuration

*2 Drawer 2 i/f (option: U.S and Canada, standard: other area)

Keyboard

*1

RS-

Flash

Flash

232C

Memory

Memory

RAM

RAM

RAM

RAM

COM2

CPU

RAM-610-10LL

RAM-610-10LL

DC24V

2MB

512KB

128KB

128KB

512KB

512KB

*1

Power

supply

RS-

Drawer

Drawer

Drawer

RS-

Clerk

*1

232C

Inline

1 i/f

2 i/f

3~4 i/f

232C

key

Memory cassette

COM1

i/f

(RAC-9)

COM3

*1

*2

*1

Clerk key

Clerk keys

Drawer

(Only for German model)

Drawer

Drawer

Drawer

TK-6000/6500

Pop up display Main display

Power supply

Note: Shadowed device and dot line indicate option devices.

*1 Refer to the in/online configuration

*2 Drawer 2 i/f (option: U.S and Canada, standard: other area)

Keyboard

*1

RS-

Flash

232C

Memory

RAM

RAM

RAM

COM2

CPU

RAM-610-10LL

DC24V

2MB

128KB

128KB

512KB

*1

Power

supply

Drawer

Drawer

RS-

Clerk

Inline

1 i/f

2 i/f

232C

key

Memory cassette

COM1

i/f

(RAC-9)

*1

*2

*1

Clerk key

Clerk keys

(Only for German model)

Drawer

Drawer

Version 1.4

12

CE-6000/6100, CE-T300

Pop up display Main display

Power supply

Note: Shadowed device and dot line indicate option devices.

*1 Refer to the in/online configuration

*2 Drawer 2 i/f (option: U.S and Canada, standard: other area)

Keyboard

Flash

RAM

RAM

Memory

CPU

512KB

2MB

128KB

(only for

T300)

Drawer

Drawer

RS-

Clerk

1 i/f

2 i/f

232C

key

Memory cassette

COM1

i/f

(RAC-9)(only for T300)

*2

*1

Clerk key

Clerk keys

(Only for German model)

Drawer

Drawer

Input/output connectors

System configuration

COM1

	COM4		COM5	Inline
	COM2	POWER	COM3
			DRW
			-
			DRW
			2	-
				1

	Illustration is based on CE-7000, TK-7000/7500 Eu model.	Power supply	Drawer
		for Slip printer

Version 1.4

CE-7000/TK-7000/TK-7500/TK-T500/TK-6000/TK-6500 Dealer's Manual

13

System configuration

In/online configuration

Peripheral ports and their connectable devices

	Model	Device	Inline port	Drawer			COM port
				port		COM 1	COM 2	COM 3
		MODEM/PC					Not	Not
	CE-6000/6100						available	available
	CE-T300	Drawer		1. Max 2
		MODEM/PC						Not
								available
		External printer						Not
		(Max. 2 printers,
								available
		except slip)
	TK-6000/6500	Slip printer						Not
								available
		Inline (option)
		Drawer		1. Max 2
		MODEM/PC
		External printer
		(Max. 2 printers,
		except slip)
		Slip printer
	CE-7000, TK-7000/7500
		Scanner
	TK-T500
		Scale
		Inline
		Drawer		1. Max 4
	: can connect
Available device/cable list
External printer:		UP-350, UP-250
Printer cable:		PRT-CB-8A(3m) or PRT-CB-8B(5m)
Power supply:		PS-170 and AC-170 (if necessary)
Slip printer:		SP-1300
Printer cable:		PRT-CB-8C
Scale:		NCI Model 6710
Scanner (Hand-held):		HHS-15
Scanner (LASER):		PSC Quick Scan 6000
Scanner (Fixed)		PSC HS1250
MODEM:		US Robotics SPORTS STAR 56.4kbps
PC cable:		PRL-CB-2

Version 1.0.1

14

Steps to define COM port/peripheral devices

for CE-7000, TK-7000/7500, TK-T500

START

No

Connect Modem or PC?

Yes

Connect it to COM1 port.

No

Connect a scanner?

Yes

Connect it to COM2 port.

No

Connect a scale?

Yes

Connect it to COM3 port.

No

Connect a slip printer?

Yes

Connect it to free COM2 or COM3 port.

No

Connect external printer(s)?

Yes

Connect it (them) to free COM port(s).

END

for TK-6000/6500

START

No

Connect Modem or PC?

Yes

Connect it to COM1 port.

No

Connect a slip printer?

Yes

Connect it to COM2 port.

No

Connect external printer(s)?

Yes

Connect it (them) to free COM port(s).

END

After connecting peripheral devices, programming of I/O parameter table, printer connection table are necessary.

Version 1.0.1

System configuration

CE-7000/TK-7000/TK-7500/TK-T500/TK-6000/TK-6500 Dealer's Manual

15

System configuration

Inline system

Non scanning system (for TK-6000/6500, CE-7000, TK-7000/7500, TK-T500)

PC or MODEM	Inline	Max. 32 terminals

Master

Satellite 1

Satellite 31

Scanning system (for CE-7000, TK-7000/7500, TK-T500)

PC or MODEM	Inline	Max. 4 terminals

Master

Satellite 1

Satellite 3

Inline cable

1p × 0.5mm2 CASIO-IPEV-SLA

Inline cable length and baud rate

baud rate	max. terminals	cable length
312.5 kbps	20 terminals	430m
156.25 kbps	32 terminals	890m

Version 1.0.1

16

Inline connector

for trunk line end

for other part

To terminal

To terminal

RED

RED

BLACK

Terminator (resistor)

RED

RED

BLACK

RED

BLACK

BLACK

Copper tape

Trunk line

Trunk line	Copper tape

Trunk line

System configuration

CE-7000/TK-7000/TK-7500/TK-T500/TK-6000/TK-6500 Dealer's Manual

17

System configuration

18

IPL (Initial program loading)

IPL should be made before initializing when the application program has been modified.

Memory map of the terminal

The application programs are downloaded from PC (via COM port)/other terminal (via inline or COM port)/Memory cassette to the internal flash memory.

Memory cassette

backup data program data

RAM

totalizer/counter, work area

Flash memory (internal) backup data

application programs

application programs

IPL

ROM

bios, program loader some diagnosis

System configuration and procedure

Via COM port

COM1 port

PC

Operation

1.Turn OFF the register.

2.While holding down <JOURNAL FEED>, turn the mode switch to PGM.

3.Release <JOURNAL FEED>.

4.Enter “44449999” and press <SUBTOTAL>.

5.Enter “0” (communication speed: 38400bps) and press <SUBTOTAL>.

6.Start the IPL program of the PC.

IPL

CE-7000/TK-7000/TK-7500/TK-T500/TK-6000/TK-6500 Dealer's Manual

19

IPL (Initial Program Loading)

Via inline

Inline

Max. 32 terminals

Master

Satellite 1

Satellite 31

Operation (satellite)

1.Turn OFF the all of the satellite register(s).

2.While holding down <JOURNAL FEED>, turn the mode switch to PGM.

3.Release <JOURNAL FEED>.

4.Enter “44449999” and press <SUBTOTAL>.

5.Enter “D 4D3D2D1” and press <SUBTOTAL>.

D4D3: 2-digit of machine ID for IPL D2: Always “1”.

D1: 1-digit of baud rate designation, “0” means 156k bps, “1” means 312k bps. 6. Follow step 2 ~ 5 for all satellites to be IPL.

Operation (master)

1.Turn to PGM mode.

2.Enter “7” and press <SUBTOTAL>.

3.Enter “150” and press <SUBTOTAL>.

4.Enter “49” and press <CASH>.

(In case of quitting, press <SUBTOTAL> instead of <CASH>.)

Via memory cassette (to send the IPL data to memory cassette)

Memory cassette

9-RAC

Operation

Memory cassette

RAC-9

(CE-T300, TK-T500)

Memory cassette

Write protect switch

1.Turn OFF the register.

2.Open the memory cassette door/printer subcover (CE-T300, TK-T500) and insert the memory cassette securely. (Please check that the memory cassette is vacant. Refer to the “System utility chapter (P7)”.)

3.Turn to PGM mode.

4.Enter “7” and press <SUBTOTAL>.

5.Enter “170” and press <SUBTOTAL>.

6.Enter “49” and press <CASH>.

(In case of quitting, press <SUBTOTAL> instead of <CASH>.) 7. Turn OFF the register and pull out the memory cassette.

(For avoiding erasing the IPL data, please turn on the write protect switch of the memory cassette.)

Version 1.0.1

20

Via memory cassette (to send the IPL data to register)

Memory cassette

9-RAC

Operation

Memory cassette

RAC-9

IPL

(CE-T300, TK-T500)

1.Turn OFF the register.

2.Open the memory cassette door/printer subcover (CE-T300, TK-T500) and insert the memory cassette securely.

3.While holding down <JOURNAL FEED>, turn the mode switch to PGM.

3.Release <JOURNAL FEED>.

4.Enter “44449999” and press <SUBTOTAL>.

5.Enter “20” and press <SUBTOTAL>.

To send IPL data to ECR via COM1 port

Operation (register)

1.Turn to PGM mode.

2.Enter “7” and press <SUBTOTAL>.

3.Enter “180” and press <SUBTOTAL>.

4.Enter “49” and press <CASH>.

(In case of quitting, press <SUBTOTAL> instead of <CASH>.) (Communication speed is fixed; 38400 bps.)

Version 1.0.1

CE-7000/TK-7000/TK-7500/TK-T500/TK-6000/TK-6500 Dealer's Manual

21

IPL (Initial Program Loading)

22

Initialization

Machine initialization procedure

For CE-7000, TK-7000/7500, TK-6000/6500, TK-T500

Note: If your register has the clerk lock, be sure to pull out the clerk key.

1. Plug the power cord into an AC outlet.

REG2	X1
REG1	Z1

2.	Set the mode switch to OFF position.	OFF	X2/Z2
		RF
			PGM	REG2	X1
3.	While holding down j, set the mode switch to PGM.			REG1	Z1
			RECEIPT JOURNAL	OFF	X2/Z2
4.	Release j.			RF
				PGM
	You should see “0000000000” on the display.
	If 10 zeros are not shown or another character are shown,		RECEIPT	JOURNAL
	immediately set the mode switch to OFF and restart from
			FEED	FEED
	the beginning of this procedure.
5.	Enter 11-digit program code from the worksheet.
6.	Press sto register the program code.		D11 D10 ~ D2 D1 s
			(refer to Initialize 1)

(Wait until beep twice.)

7.In case of installing inline system,

enter 3-digit program code from the worksheet.

(For TK-6000/6500 without inline option, do NOT enter any value.)

D3 D2 D1 s

(refer to Initialize 2)

8. Press sto register the program code.

After completion of initialization and program loading, initialization receipt is issued.

Please turn on and initialize the registers in order, if your registers are connected with inline. The ID number of registers are defined automatically.

(Do NOT turn off the register(s) until all register has been initialized.)

Version 1.0.1

Initialization

CE-7000/TK-7000/TK-7500/TK-T500/TK-6000/TK-6500 Dealer's Manual

23

Initialization

Only for CE-6000/6100, CE-T300

Note: If your register has the clerk lock, be sure to pull out the clerk key.

1. Plug the power cord into an AC outlet.

2.Set the mode switch to OFF position.

3.While holding down j, set the mode switch to PGM.

REG2 X1

REG1 Z1

OFF X2/Z2

RF

PGM	REG2	X1
	REG1	Z1
RECEIPT	JOURNAL
	OFF	X2/Z2

RF

4. Release j.

You should see “0000000000” on the display.

If 10 zeros are not shown or another character are shown, immediately set the mode switch to OFF and restart from the beginning of this procedure.

PGM

RECEIPT JOURNAL

FEED FEED

5. Enter 11-digit program code from the worksheet.

6. Press sto register the program code.			D11 D10 ~ D2 D1 s
			(refer to Initialize 1)
		After completion of initialization and program
		loading, initialization receipt is issued.
Worksheet (Initialize 1)
	Description		Choice		Program code
	Print password of PGM mode, when flag clear operation is performed.		Yes = 0		:
			No = 4		D11
	Password in PGM3 ~ 7 mode		Significant		::::
			numbers		D10 D9 D8 D7
	Messages and descriptors are written in		Significant		:
	English = 0, French = 1, Spanish = 2, German = 4		number		D6
	Model for
	U.S. or Canada (Date order: month/day/year) = 2,		Significant		:
	German (Date order: day/month/year) = 4,
			number		D5
	Other area (~00, Date order: day/month/year) = 1,
	Other area (0, Date order: day/month/year) = 3
	Fixed value:
	CE-7000: 15, 20, 30 (dependent upon number of department keys)		Significant		::
	TK-7000, TK-7500, TK-6500, TK-T500: 08
			numbers		D4 D3
	TK-6000: 04 or 08
	CE-6000/6100, CE-T300: 15
	Use	a	1 = 0
	1 clerk switch (clerk push switch)/
			2 = 1		:
	2 clerk lock/key or clerk secret number key *
					(a+b)
	Initialization pattern:
		b	1 = 0		D2
	(only effective for CE-7000, TK-7000, TK-7500, TK-T500)
			2 = 2
	1 For scanning/2 For check tracking
	Use Euro only.		No = 0		:
			Yes = 1		D1

* When you select this option “Use clerk secret code key”, and your register doesn’t have this key on the default keyboard, be sure to allocate <CLERK-#> (clerk secret number key) just after the initialization.

(Do NOT turn to OFF before allocating this key.)

Version 1.0.1

24

Worksheet (Initialize 2)

Description	Choice	Program code
Inline baud rate	156kbps = 0	:
	312kbps = 1	D3
Inline physical I.D. (01 ~ 32)	Significant	::
	numbers	D2 D1

Note:

Please check the receipt after initialization operation (machine initialization, flag clear operation and init2) that the machine

number is printed properly.
If error codes are printed on it, check the hardware and retry the operation.
(For TK-6000/6500 without I/O-PB-14, the error “ 0004-98						2000” is always printed.)
	INIT 03-04-2000 11:58			—	Mode symbol/date/time
	C01	MC#01	000001	—	Clerk descriptor/Mc-No./consecutive No.
	INIT			—	INIT symbol
	(C) 2000 by CASIO
	COMPUTER CO.,LTD.			—	Copyright
	All rights reserved.
	TK-6000/6500 STD			—	Model name
	No.	:nnnn		—	ROM version
	LABEL	:nnnnnn		—	ROM label
	No.	:nnnn		—	ROM version
	LABEL	:nnnnnn		—	ROM label
	INIT	:nnnnnnnnnnnnnn		—	Initialization code
	0004-98		2000—		I/O parameter table record No./error code

Initialization

Flag clear operation

1.Plug the power code into an AC outlet.

2.Set the mode switch to OFF position.

3.While holding down f, set the mode switch to PGM.

4.Release f.

You should see “FFFFFFFFFF” on the display.

If 10 Fs are not shown or another character are shown, immediately set the mode switch to OFF and restart from the beginning of this procedure.

REG2 X1

REG1 Z1

OFF X2/Z2

RF

PGM	REG2	X1
	REG1	Z1
JOURNAL	OFF	X2/Z2
FEED
	RF
	PGM
RECEIPT	JOURNAL
FEED	FEED

5. Press sto complete.

After completion of flag clear, receipt is issued.

CE-7000/TK-7000/TK-7500/TK-T500/TK-6000/TK-6500 Dealer's Manual

25

Initialization

Init 2 operation

1.Plug the power code into an AC outlet.

2.Set the mode switch to OFF position.

3.While holding down f, set the mode switch to PGM.

4.Release f.

You should see “FFFFFFFFFF” on the display.

If 10 Fs are not shown or another character are shown, immediately set the mode switch to OFF and restart from the beginning of this procedure.

REG2 X1

REG1 Z1

OFF X2/Z2

RF

PGM	REG2	X1
	REG1	Z1
JOURNAL	OFF	X2/Z2
FEED
	RF
	PGM
RECEIPT	JOURNAL
FEED	FEED

5. Enter “8888888888” and press kto complete.

After completion of flag clear, receipt is issued.

Entering diag mode

1.Plug the power cord into an AC outlet.

2.Set the mode switch to OFF position.

3.While holding down j, set the mode switch to PGM.

4.Release j.

5.Enter “99990000” and press sto enter the diagnosis.

REG2 X1

REG1 Z1

OFF X2/Z2

RF

PGM	REG2	X1
	REG1	Z1
RECEIPT JOURNAL	OFF	X2/Z2
	RF
	PGM
RECEIPT	JOURNAL
FEED	FEED

Password

During initialize operation, you can program the password for PGM 3 ~ 7. If it is set, every time you enter PGM 3 ~ 7 mode, you must input this password by the following procedure.

1.Press <#-1> (normally a).

2.Enter password.

3.Press <#-2> (normally s).

Otherwise, you can do nothing in the PGM 3 ~ 7 mode.

26

Programming (General explanation)

Program sub mode (P1 thru P7 mode)

Program mode contains seven sub modes listed below. When you change the mode switch to PGM mode, the register is always in the PGM 1 mode. In case of using other mode, enter the sub mode number (2 ~ 7) and press <SUBTOTAL>.

•PGM1: unit price, rate, date, time, scanning PLU unit price maintenance

•PGM2: descriptor, name, message

•PGM3: machine feature (general function, clerk, etc.), key feature (department, transaction), scanning PLU maintenance

•PGM4: key allocation

•PGM5: file allocation

•PGM6: program reading

•PGM7: auto-program, system utility

Entering the program sub mode

Procedure (for PGM 1, 2 mode)

PGM

661s

::::

6s

6a

6 PGM1

Mode switch

Password (4-digit)

62s

::::

6s

6a

6 PGM2

Password (4-digit)

1.Enter password for PGM 1, 2 mode. If the register has no password for the PGM1 and 2 mode, you need not to enter it.

2.Press <SUBTOTAL>. An error occurs if you try to enter the PGM1 or 2 mode without inputting a password (when one is programmed), or if the password you input does not match the one programmed for the register.

To avoid repetition, the above operation is abbreviated to the following for all of the other procedure in this manual. This password is defined by the address code 02 of the general function program.

Procedure (for PGM 3 ~ 7 mode)

Programming

PGM	63~ 7s			::::			6s
		6a						6 PGM 3 ~ 7
Mode switch				Password (4-digit)

1.Enter password for PGM 3 ~ 7 mode. If the register has no password for the PGM 3 ~ 7 mode, you need not to enter it.

2.Press <SUBTOTAL>. An error occurs if you try to enter the PGM 3 ~ 7 mode without inputting a password (when one is programmed), or if the password you input does not match the one programmed for the register.

To avoid repetition, the above operation is abbreviated to the following for all of the other procedure in this manual. This password is defined during initialization operation.

CE-7000/TK-7000/TK-7500/TK-T500/TK-6000/TK-6500 Dealer's Manual

27

Programming (General explanation)

28

File allocation (Program 5)

File allocation program

Programming procedure

PGM 65s6 : ::s6 :~ :a6 s

Mode switch

File record number (see next pages.)

File attribution code (see below.)

File number (see next pages.)

File attribu-

Consolidation file

tion code

Daily sales

Periodic 1

Periodic 2

Daily sales

Periodic 1

Periodic 2

0

1

2

3

4

5

Version 1.2.0

Program 5

CE-7000/TK-7000/TK-7500/TK-T500/TK-6000/TK-6500 Dealer's Manual

29

File allocation programming (P5)

File number list

File	File description	Record	Max. No.		Description	Attribu-	Allocat-
No.		length	of records			tion	able
System files
---	Consecutive number work	6	1			Work	No
091	Terminal connection table	10	32			Program	Yes
093	Printer connection	3	7			Program	Yes
---	Start date	4	1			Buffer	No
---	Initialize code	7	1			Program	No
096	AT command	62	2			Program	Yes
097	Online password	8	1			Program	Yes
---	I/O parameter	8	*1			Program	No
099	System error log	11	99			Buffer	Yes
Function and total files
001	Fixed totalizer	22	97			Pgm/Sale	No
---	(periodic total 1)	10	97			Sales	Yes
---	(periodic total 2)	10	97			Sales	Yes
---	(daily consolidation)	10	97	*A		Sales	Yes
---	(periodic 1 consolidation)	10	97	*A		Sales	Yes
---	(periodic 2 consolidation)	10	97	*A		Sales	Yes
002	Transaction key	35	999			Pgm/Sale	Yes
---	(periodic total 1)	10	999			Sales	Yes
---	(periodic total 2)	10	999			Sales	Yes
---	(daily consolidation)	10	999	*A		Sales	Yes
---	(periodic 1 consolidation)	10	999	*A		Sales	Yes
---	(periodic 2 consolidation)	10	999	*A		Sales	Yes
003	Subdepartment	30	99	*A		Pgm/Sale	Yes
---	(periodic total 1)	15	99	*A		Sales	Yes
---	(periodic total 2)	15	99	*A		Sales	Yes
---	(daily consolidation)	15	99	*A		Sales	Yes
---	(periodic 1 consolidation)	15	99	*A		Sales	Yes
---	(periodic 2 consolidation)	15	99	*A		Sales	Yes
004	PLU	*2	9999			Pgm/Sale	Yes
---	(periodic total 1)	*3	9999			Sales	Yes
---	(periodic total 2)	*3	9999			Sales	Yes
---	(daily consolidation)	*4	9999	*A		Sales	Yes
---	(periodic 1 consolidation)	*4	9999	*A		Sales	Yes
---	(periodic 2 consolidation)	*4	9999	*A		Sales	Yes
005	Department	*5	99			Pgm/Sale	Yes
---	(periodic total 1)	*6	99			Sales	Yes
---	(periodic total 2)	*6	99			Sales	Yes
---	(daily consolidation)	*7	99	*A		Sales	Yes
---	(periodic 1 consolidation)	*7	99	*A		Sales	Yes
---	(periodic 2 consolidation)	*7	99	*A		Sales	Yes

*1 1 (CE-6000/6100, CE-T300), 4 (TK-6000/6500, CE-7000, TK-7000/7500, TK-T500)

*2 51 (CE-6000/6100, CE-T300), 55 (TK-6000/6500), 78 (CE-7000, TK-7000/7500, TK-T500) *3 10 (CE-6000/6100, CE-T300, TK-6000/6500), 30 (CE-7000, TK-7000/7500, TK-T500)

*4 10 (TK-6000/6500), 30 (CE-7000, TK-7000/7500, TK-T500)

*5 45 (CE-6000/6100, CE-T300), 49 (TK-6000/6500), 64 (CE-7000, TK-7000/7500, TK-T500) *6 10 (CE-6000/6100, CE-T300, TK-6000/6500), 25 (CE-7000, TK-7000/7500, TK-T500)

*7 10 (TK-6000/6500), 25 (CE-7000, TK-7000/7500, TK-T500)

*A Except for CE-6000/6100, CE-T300

*B Only for CE-7000, TK-7000/7500, TK-T500

Version 1.0.1

30