Safety Precautions
Before trying to use the Digital Keyboard, be sure to read the separate “Safety Precautions”.
GUÍA DEL USUARIO
Guarde toda la información para futuras consultas.
Precauciones de seguridad
Antes de intentar usar el teclado digital, asegúrese de leer las “Precauciones de seguridad” separadas.
EnglishEspañol
About Music Score data
You can use a computer to download music score data from the CASIO Website. For more information, visit the
URL below.
http://world.casio.com/
Acerca de los datos de partituras
Puede utilizar un ordenador (computadora) para descargar los datos de partituras desde el sitio web de CASIO.
Para obtener más información, visite la siguiente URL.
http://world.casio.com/
CTK1500-ES-1A
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
Declaration of Conformity According to EU Directive
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTICE
Model Number: CTK-1500/CTK-1550
Trade Name: CASIO COMPUTER CO., LTD.
Responsible party: CASIO AMERICA, INC.
Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Important!
Please note the following important information before using this product.
• Before using the optional AD-E95100L Adaptor to power the unit, be sure to check the AC Adaptor for any damage first.
Carefully check the power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC
adaptor that is seriously damaged.
• Never attempt to recharge batteries.
• Do not use rechargeable batteries.
• Never mix old batteries with new ones.
• Use recommended batteries or equivalent types.
• Always make sure that positive (+) and negative (–) poles are facing correctly as indicated near the battery compartment.
• Replace batteries as soon as possible after any sign they are getting weak.
• Do not short-circuit the battery terminals.
• The product is not intended for children under 3 years.
• Use only CASIO AD-E95100L adaptor.
• The AC adaptor is not a toy.
• Be sure to disconnect the AC adaptor before cleaning the product.
Manufacturer:
CASIO COMPUTER CO., LTD.
Declaration of Conformity
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Responsible within the European Union:
Casio Europe GmbH
Casio-Platz 1, 22848 Norderstedt, Germany
www.casio-europe.com
●Any reproduction of the contents of this manual, either in part or its entirety, is prohibited. Except for your own, personal
use, any other use of the contents of this manual without the consent of CASIO is prohibited under copyright laws.
●INNO EVENT SHALL CASIO BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE
USE OF OR INABILITY TO USE THIS MANUAL OR PRODUCT, EVEN IF CASIO HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
●The contents of this manual are subject to change without notice.
●The actual appearance of the product may be different from that shown in the illustrations in this User’s Guide.
●Company and product names used in this manual may be registered trademarks of others.
cl DC 9.5V terminal ☞EN-7cm PHONES/OUTPUT jack ☞EN-8, 17
bl LESSON LITE button ☞EN-14
bm FUNCTION button ☞EN-4
bn TEMPO buttons ☞EN-11, 13
bo Speakers
bp Song Bank list
bq Rhythm list
br Display
bs Tone list
bt Dance Music Track list
ck Dance Music tone
English
■ Display
4
123
5
6
7
bk98
* N:Normal, F:Fill-in
Number, setting name/status display
Indicators
Volume, Tempo, measure
N F (Auto Accompaniment Types) indicators*
Acc (Auto Accompaniment) indicator
Dance Music Mode indicator
Beat display
Chord name
Pattern phrase keyboard/chord keyboard
Part, fingering display
EN-3
General Guide
Timeout
If you do not perform any operation for a while configuring
settings, the display will return to the previous screen
automatically.
Using the 10-key Pad (9)
Use the number buttons and the [–] and [+] keys to change
displayed numbers and settings.
Number Buttons
Use the number buttons to enter numbers and values.
• Enter the same number of digits as the currently displayed
value.
Example:
To enter tone number 004, input 0 3 0 3 4.
• Negative values cannot be input using the number buttons.
Use [+] (increase) and [–] (decrease) instead.
[–] and [+] Keys
You can use the [+] (increase) and [–] (decrease) keys to
change the displayed number or value.
• Holding down either key scrolls the displayed setting.
• Pressing both keys at the same time will revert to the initial
default setting or the recommended setting.
Using the FUNCTION Button (bm)
Use this button to change the volume level and pitch, and to configure other settings.
1.
Press bm FUNCTION.
2.
Next, press bm FUNCTION the number of times required to select the setting youwant to change.
Each press of bm FUNCTION cycles through the available parameters.
• You can also scroll back through settings by holding down bm FUNCTION and pressing bn TEMPOw.
bm key
presses
1TransposeTrans.Changes (transposes) overall instrument tuning by semitone units.
2Accompaniment
3Song VolumeSong VolChanges the song playback volume.
4Dance Music
ParameterDisplayDescription
–12 to +12 (semitone units, one octave up/down)
AcompVol Changes the Auto Accompaniment volume.
Volume
DM Vol.Changes the dance music song playback volume.
Volume
EN-4
General Guide
bm key
presses
5Dance Music
6Dance Music
7Dance Music
8Voice Fingering
9Note GuideNoteGuidEnables or disables Note Guide, which sounds each note you need to play
10Performance
11TuningTuneMakes slight adjustments to the overall pitch. Use this feature to adjustment
ParameterDisplayDescription
Sync Type
Tempo Setting
Tone Setting
Guide
Evaluation
DM SyncSets the timing of dance music syncing.
1: No misalignment of phrase playback between each part, regardless of pattern
phrase switch timing.
2: Start pattern phrase playback to match timing of the pattern switching
keyboard key. If there is misalignment with the playback timing of the pattern
phrase between parts, alignment will be adjusted automatically measure-bymeasure as playback proceeds.
DM Tempo Specifies whether or not the performance tempo changes to the value that is
preset for each pattern.
on: When the pattern is switched, the performance tempo changes to the tempo
suggested for the selected pattern. Since the tempo changes, melody can be
completely changed.
oFF: Even if the pattern is switched, the performance tempo remains at its
current setting, without changing.
Tempo does not change suddenly, which enables natural pattern connection.
DM ToneSpecifies whether or not the keyboard tone changes to the tone that is preset for
each pattern.
on: When the pattern is switched, the tone changes to the tone suggested for the
selected pattern. Select this setting when you want to change the performance
tone whenever the pattern changes.
oFF: Even if the pattern is switched, the tone remains at its current setting,
without changing. Select this setting when you want the same tone to play even
if the pattern changes.
SpeakEnables or disables Voice Fingering Guide, which uses a voice to tell you which
finger to use to play each note during Lesson Lite.
on: Voice Fingering Guide enabled.
oFF: Voice Fingering Guide disabled.
during a Lesson Lite.
on: Note Guide enabled.
oFF: Note Guide disabled.
ScoringEnables or disables Performance Evaluation, which displays scores for your
Lesson Lite results.
on: Performance Evaluation enabled.
oFF: Performance Evaluation disabled.
Digital Keyboard tuning to another musical instrument or to playback from a
CD. This setting is the frequency of A4 (A above middle C). See the notes under
“IMPORTANT!” below.
415.5 to 465.9 Hz (Initial Default: 440.0 Hz)
English
EN-5
General Guide
bm key
presses
12LCD ContrastContrastAdjusts display contrast.
13Auto Power Off APOSetting that controls whether or not the Digital Keyboard turns off automatically
3.
When the parameter youwant is displayed, use 9 (10-key) to change its setting.
• The tone and other parameters revert to their initial defaults whenever you turn on power. The main volume, and Tuning, LCD
Contrast, and Auto Power Off settings are automatically saved and retained when power is turned off.
• You can use the [+] and [–] buttons to input a value to the right of a decimal point.
To specify 442.2 Hz, for example, first use the number buttons to input 4 3 4 3 2. Next, press the [+] button twice.
ParameterDisplayDescription
1 to 12: A larger value makes the display contrast darker.
after a period of non-use.
oFF: Auto Power off disabled.
30: The Digital Keyboard turns off automatically after 30 minutes of non-use.
EN-6
Getting Ready to Play
Using Batteries
Preparing the Music Stand
Music stand
Power Supply
Either an AC adaptor or batteries can be used to power this
Digital Keyboard. Normally, use of AC adaptor power is
recommended.
• Depending on your geographical area, an AC adaptor may
not be included. In this case, will need to purchase an AC
adaptor from your retailer.
Using the AC Adaptor
Make sure that you use only the AC adaptor specified for this
Digital Keyboard. Use of a different type of AC adaptor can
cause malfunction.
Specified AC Adaptor: AD-E95100L
(JEITA Standard plug)
AC adaptor
DC 9.5V terminalHousehold power outlet
• Be sure to turn off power before loading batteries.
• It is up to you to prepare six commercially available AA-size
batteries. Do not use oxyride batteries or any other nickel
based batteries.
1.
Open the battery cover on the bottom of the Digital
Keyboard.
2.
Load six AA-size batteries into the battery
compartment.
Make sure the positive + and negative - ends of the
batteries are facing as shown in the illustration.
3.
Insert the tabs of the battery cover into the holes
on the side of the battery compartment, and close
the cover.
■ Low Battery Indication
The indicator shown below starts to flash to let you know
when battery power is low. Replace the batteries with new
ones.
Low battery indicator (flashes)
English
• Be sure to turn off Digital Keyboard power before
connecting or disconnecting the AC adaptor.
• The AC adaptor will become warm to the touch after very
long use. This is normal and does not indicate malfunction.
• To prevent breaking of the wire, take care to avoid putting
any type of load on the power cord.
No bending!No winding!
• Never insert metal, pencils, or any other objects into the
product’s 9.5V DC terminal. Doing so creates the risk of
accident.
EN-7
Playing the Digital Keyboard
Turning on Power and Playing
1.
Press 1P (Power).
This turns on power.
• To turn off the Digital Keyboard, hold down the 1P
(Power) button until the Digital Keyboard’s display
goes blank.
2.
Try playing something on the keyboard. You could
use 2 VOLUME to adjust the volume setting.
• This causes the volume indicator, which shows the
current volume level, to appear on the display.
•Turning off power causes tone, rhythm, and other settings
(except for main volume, the Tuning, LCD Contrast, and
Auto Power Off settings) to return to their initial defaults.
Playing the Demo Songs
Following playback of the dance music demo (000), the builtin songs will playback sequentially from 001 to 100. You can
switch to a different song while playback is in progress.
1.
Press 4 START/STOP, PLAY/STOP and
5 CHORDS, ACCOMP, PART SELECT at the
same time.
This will start playback of the demo songs. Demo
playback continues until you stop it.
• Demo songs always start from song number 000
(dance music demo song).
• See page A-4 for a complete list of available songs.
2.
To change to another song while demo playback is
in progress, use 9 (10-key) [–] and [+] keys to
enter the song number you want (page EN-4).
This will cause demo playback to jump to the song
whose number you entered.
• You cannot use 9 (10-key) number buttons to select a
song.
3.
To stop demo playback, press 4 START/STOP,
PLAY/STOP.
Demo playback continues until you stop it by pressing
4 START/STOP, PLAY/STOP.
Using Headphones
Using headphones cuts off output from the built-in speakers,
which means you can practice playing even late at night
without disturbing others.
• Be sure to turn down the volume level before connecting
headphones.
• Headphones do not come with the Digital Keyboard.
• Use commercially available headphones. See page EN-1 for
information about options.
• Do not listen to very high volume output over headphones
for long period. Doing so creates the risk of hearing
damage.
• If the plug of the headphones you are using does not match
the cm PHONES/OUTPUT jack, use the applicable
commercially available adaptor plug.
• If you are using headphones that require an adaptor plug,
make sure you do not leave the adaptor plugged in when
removing the headphones.
EN-8
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.