Carmelli NG1016M Assembly Guide
ACCELERATOR 4in1 MULTI-GAME
TABLE ASSEMBLY INSTRUCTIONS
Ver. 0916
Please Do Not Hesitate to
Contact Our Consumer Hotline
at
800-759-0977
with Any Questions That May
Arise During Assembly or
Use of This Product!
NG1016M
THANK YOU!
Thank you for purchasing this product. We work around the clock and around the globe to ensure
that our products maintain the highest possible quality. However, in the rare case of issues during
assembly or use of this product, please contact our Consumer Hotline at 800-759-0977 for immediate
assistance before contacting your retailer. Please read the warranty information at the back of these
assembly instructions for further details.
ASSEMBLY TIPS
IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS
IN ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT.
1. Find a clean, level surface to begin the assembly of your game table. We recommend that two adults
work together to assemble this game. You may want to carefully cut or tear the four corners of the box
so that the bottom of the box can be used as your work surface.
2. Remove all of the contents from box and verify that you have all of the parts shown on the Parts
List before you begin assembly. Note: Some parts may be pre-installed or pre-assembled.
3. Some figures or drawings may not look exactly like product.
4. When installing parts that have more than one screw or bolt, hand tighten all screws or bolts
in place before final tightening with screwdriver or wrench.
5. Electric screwdrivers may be helpful during assembly; however, please set a low torque and use
extreme caution because screws may be stripped or overtightened, resulting in damaged parts, if the
electric screwdriver’s torque is set too high.
WARNINGS!
READ AND FOLLOW ALL ASSEMBLY, OPERATION AND SAFETY INSTRUCTIONS CAREFULLY.
CHOKE HAZARD - THIS ITEM MAY CONTAIN SMALL BALLS AND PARTS
NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE.
CARE AND USE
1. This product is intended for INDOOR use only.
2. Do NOT drag the table when moving it, as this will damage the legs.
2
Parts List
ACCELERATOR 4in1 MULTI-GAME - NG1016M
P1 NGP6000
TABLE BODY
1 pc
P6 NGP6005
BASKETBALL ARM
2 pcs
P11 NGP6010
STRIKER
2 pcs
P2 NGP6001
LEG
4 pcs
P7 NGP6006
BACKBOARD
1 pc
P12 NGP6011
PUCK
2 pcs
P3 NGP6002 P4 NGP6003
A
B
TABLE TENNIS
LEG PANEL
2 pcs
P8 NGP6007 P9 NGP6008
BASKETBALL RIM
1 pc
P13 NGP6012 P14 NGP6013
TABLE TENNIS NET
1 pc
WHITE BOARD
1 pc
BASKETBALL
1 pc
TABLE TENNIS POSTS
2 pcs
P5 NGP6004
LEG LEVELER
4 pcs
P10 NGP6009
BALL RETURN NET
1 pc
P15 NGP6014
TABLE TENNIS BALL
2 pcs
P16 NGP6015
TABLE TENNIS PADDLE
2 pcs
P21 NGP6018*
NUT
4 pcs
P26 NGP6018*
ALLEN WRENCH
1 pc
P17 NGP6016
MARKER
2 pcs
P22 NGP6018*
WASHER
22 pcs
P27 NGP6018*
1/4”x1” BOLT
16 pcs
P18 NGP6017 P19 NGP6018*
ERASER
1 pc
P23 NGP6018* P24 NGP6018*
1/4”x1” BOLT
4 pcs
P28 NGP50801
(Pre-installed on Table)
BLOWER MOTOR
1 pc
1/4”x3/4” BOLT 26mm BOLT
2 pcs
1/2” SCREW
12 pc
*Items included in Hardware Pack, NGP6018
P20 NGP6018*
4 pcs
P25 NGP5035
AIR PUMP
1 pc
Illustrations Not to Scale
9/16
For replacement parts please call 800-759-0977. 3
THANK YOU!ASSEMBLY INSTRUCTIONS
1. Attach one LEG P2 to each corner of the TABLE BODY P1 using BOLTS P27 and WASHERS P22.
2. Attach LEG PANELS P3 to inside of LEGS P2 on each end of table using SCREWS P24 in pre-drilled holes.
3. Install one LEG LEVELER P5 on bottom of each Leg. Carefully turn table over onto legs.
P27
4. Attach BASKETBALL RIM P8 onto BACKBOARD P7 using SCREWS P24 in pre-drilled holes.
P27
4
THANK YOU!ASSEMBLY INSTRUCTIONS (CONT.)
5. Attach two BASKETBALL ARMS P6 onto end of TABLE BODY P1 using BOLTS P23 and WASHERS P22.
6. Attach BACKBOARD P7 onto BASKETBALL ARMS P6 using four BOLTS P20 and NUTS P21 as shown.
5
Loading...