Canon SmartBase PC1210D, SmartBase PC1230D, SmartBase PC1270D pc1200s-010
SERVICE BULLETIN
Issued by Canon Europa N.V.
FAX
MODEL:
LOCATION: DIMM ASSEMBLY (FG6-8554/FG6-8546)
SUBJECT : ROM DIMM ASSEMBLY UPGRADED FROM EC-26-05 TO EC-29-02
Reason :
Outline :
PC1210
PC1230
PC1270
Since mass production approval is given to the FAX model for the EC model (only
for the CTR member countries and Hungary), the ROM is upgraded to EC-29-02.
Service Bulletin Ver. No Changes made
EC-29-02 1) Release of FAX model for EC model (Only for CTR
(FF-T01-L6-000041-01)
Date: 30.08.02
member countries and Hungary)
No.: PC1200S-010
2) Change of a jam message
3) Correction of bugs
PC1200S-009 EC-26-05 1) Correction of bugs
EC-26-03 1) First release
Details:
(1) Copy Function
-
The jam message is changed from "SLIDE LEFT PLATEN" to "SLIDE PLATEN
LEFT".
-
If a copy job is cancelled by pressing the STOP key immediately after
pressing the START key, there is a possibility that a next job, which is
performed 6 to 10 sec after the cancellation, might be also cancelled. This
fault is corrected.
-
In case that "SET ON LOADING" is set, an output image becomes smaller
than the normal 2 on 1 image when pressing the "2 on 1" button immediately
after loading paper onto the multi-tray and selecting a paper size. This fault
is corrected.
FAX - 2 - PC1200S-010
(2) FAX Function
-
Mass production approval is given to the FAX model for the EC model (only for
the CTR member countries and Hungary).
Since the Czech model, the SAF model, and the Slovenia model have not been
authorized yet, mass production approval is withheld.
- Mass production approval is given to the Australia model (including the FAX
model).
Since the China model, the New Zealand model, the Malaysia model, and
the Hong Kong model have not been authorized yet, mass production
approval is withheld.
- When the report output operation is performed continuously twice, if toner
replenishment warning is indicated and paper is out while the first report is
being output, an LCD indication failure occurs. This fault is corrected.
-
An initial country setting in the NCU type settings does not meet the
specifications.
This fault is corrected.
Parts
Product
Code
ALL Old DIMM ASS'Y FG6-8546-000 1 NY
New DIMM ASS'Y FG6-9809-000 1
ALL Old DIMM ASS'Y FG6-8554-000 1 NY
New DIMM ASS'Y FG6-9809-000 1
* Old IMAGE PROCESSOR PCB
New IMAGE PROCESSOR PCB
** Old IMAGE PROCESSOR PCB
New IMAGE PROCESSOR PCB
*** Old IMAGE PROCESSOR PCB
Part Name Part No. UNIT No. Qty IC Location
FG6-8810-000 1 NY
ASSEMBLY
FG6-8810-000 1
ASSEMBLY
FG6-8816-000 1 NY
ASSEMBLY
FG6-8816-000 1
ASSEMBLY
FG6-8821-000 1 NY
ASSEMBLY
New IMAGE PROCESSOR PCB
ASSEMBLY
FG6-8821-000 1
* PC1270D 230V(CB KITTING), ** PC1230D 230V, *** PC1210D 230V
Loading...