Canon SmartBase PC1210D, SmartBase PC1230D, SmartBase PC1270D pc1200s-006

SERVICE BULLETIN

Issued by Canon Europa N.V.

FAX

MODEL:

Date: 30.08.02

LOCATION: ADF ASSEMBLY
SUBJECT : CHANGE OF SHAPES OF MEMBER PARTS

Reason :

Outline :

Smart Base PC1230D

Smart Base PC1270D

To prevent breakage of the swing arm due to impact during physical distribution in the
field

The breakage is caused by the impact applied to the root of the spring hook
during physical distribution. To avoid stress concentration on the spring hook
and enhance the endurance against impact, the measures described below are
taken.

1. Addition of R0.8 to the root of the spring hook (f3mm).

2. Addition of R1.0 to the protrusion at the front edge of the spring hook (f3mm).

3. Change of the position of the arm (t=2.5) so that the arm contacts the spring
hook in a straight line. (Refer )

(FF-T01-L6-000025-01)

No.: PC1200S-006

Before Change After Change

Parts

Part Name Part No. UNIT No. Qty IC Location
Old ARM,SWING FC5-0023-000 1 NY

New ARM,SWING FC5-0023-020 1
Old FRAME,FEEDER ASSEMBLY FM2-0002-000 1 NY
New FRAME,FEEDER ASSEMBLY FM2-0002-030 1

FAX - 2 - PC1200S-006

Serial No.

Product Code Model Rev No. Starting Serial No.
SmartBase PC1230D EUR UUM1008

SmartBase PC1230D GER UUX1024
SmartBase PC1230D FRN UUY345
SmartBase PC1230D ITA UUZ193